How to remove urine alkali in the toilet? Do you know?

Introduction: If the toilet is used for a long time and is not cleaned, it will produce a thick urine alkali. So how do you remove urine alkali from the toilet? Rinse the toilet with clean water first, and then pour dilute hydrochloric acid into the area where there is urine alkali.

Can be soaked overnight, dilute hydrochloric acid is colorless, be sure to prevent the child at home from entering the toilet, so as not to harm the child's health, you can flush the water in the morning on the second day, you can see that the dirt is washed up, and then wear gloves and brush the brush several times. Place 1 2 cups baking soda.

Sprinkle it in the toilet bowl and then brew it with hot boiled water for half an hour to remove lighter dirt. If stubborn stains have formed, they can be used with vinegar solution, soaked thoroughly and cleaned with a brush. The outside base of the toilet, which is easy to overlook, can also be cleaned in the same way and then dried with a cloth.

To remove stubborn stains from the toilet, you can wipe them off with a fine steel wool ball dipped in baking soda.

First, bleach removes mold.

The bathroom environment is humid, easy to breed bacteria, if you do not pay attention to cleaning will have a certain impact on our health, due to the special environment of the bathroom, it is easy to give birth to some mold, want to remove these molds, bleach can help us, bleach has a strong oxidation.

You can dilute it first, dilute it 100 times, and then dip it in a cotton swab to coat it, wait for 30 minutes in the place where there is mold, and brush it with a toothbrush to effectively remove the mold.

2. Acetate salt solution to eliminate the rust of ceramic basins.

After the porcelain basin in the bathroom is used for a period of time, the ceramic at the bottom of the basin and the metal will have rust stains, and if we want to remove these rusts, we can prepare an acetate solution to clean them. Add a certain amount of salt to the vinegar, heat it to melt, dip it in an old towel to take the heated solution, apply it to the rusty place in the porcelain basin, and after 30 minutes, wipe it with a coarse cloth to remove the rust.

III. Conclusion. After using the shower for a period of time, sometimes there is a problem of less water output, many people think that this is a problem of water pressure, but this may also be the shower's head is blocked. Unscrew the shower head, soak it in a diluted vinegar solution, and after a few hours, rinse it off with clean water, and some of the stains that clog the shower head will be easy to clean.

Urine alkali removal method, because urine alkali is an alkaline substance, mainly urine alkali and water alkali. Then all substances that contain acids can neutralize urine bases. Therefore, you can use cola to remove urine alkali, the main ingredient of cola is carbonic acid, which will react with urine alkali to reduce urine alkali, for example, you can soak cola in the toilet bowl by brushing the toilet, and then rinse, these urine alkali on the inner wall of the toilet bowl will soon fall off, for the purpose of cleaning, in addition to the removal of urine alkali, you can use toilet cleaner, the main ingredient of toilet cleaner is hydrochloric acid, in addition, it also has a surface active agent, which can eliminate urine alkali, can remove the odor of urine alkali, and can remove the bacterial propagules virus in urine alkali, It has a good killing effect on these harmful substances.

Add an appropriate amount of baking soda and a little white vinegar, pour it into the toilet bowl and stir evenly, soak it for an hour, and then wear plastic gloves and brush it clean.

Of course, I know that oxalic acid can be used to remove clouds as oxalic acid, which will have a chemical reaction with urine base.

Abstract: Caustic soda cannot remove urine alkali from the toilet bowl.

Caustic soda is alkaline, alkaline is to remove oil, the scale in the toilet can be divided into grease scale, scale and stool scale, with caustic soda can not be removed.

How to remove urine alkali from the toilet:

Preparation: white vinegar, edible alkali, toilet brush.

Step 1: Pour 15ml of white vinegar into the toilet (white vinegar contains acetic acid, which can dissolve the urine alkali in the toilet).

Why can toilet urine alkali be removed with caustic soda.

Dear, hello, I will give you your question, I am sorting out the answer, it takes some time to type, please wait a while, thank you!

Caustic soda does not remove urine alkali from the toilet. Caustic soda is alkaline, alkaline is to remove oil, the scale in the toilet can be divided into grease scale, scale and stool scale, with caustic soda can not be removed. How to remove urine alkali from the toilet:

Preparation: white vinegar, edible alkali, toilet brush. Step 1:

Pour 15ml of white vinegar into the toilet (white vinegar contains acetic acid, which dissolves the urine alkali in the toilet).

1. White vinegar + baking soda. Take an appropriate amount of white vinegar and add a little baking soda powder, mix well, pour it into the toilet, about 15 minutes later, scrub it with a brush, and finally rinse it with water, perfect solution! In addition, we can also put the white vinegar in a bottle with a small hole in the bottom and put it in the water tank, so that the white vinegar will automatically flow out and mix in the water every time we flush, not only to remove dirt but also to disinfect.

2. Leftover Coke. You can pour the leftover cola into the toilet bowl and soak it for about an hour, because the main ingredient of cola is carbonic acid, which will react with alkaline dirt to remove dirt and achieve the purpose of cleaning. 3. Soot.

If you have a smoker at home, you can collect the usual cigarette ash and add a little soot to it when removing the stubborn dirt, which can be easily cleaned up with ordinary toilet cleaner! 4. Toothpaste. Toothpaste has a certain decontamination effect, and the stains that are difficult to get in the toilet can be solved.

You don't need to use expensive toothpaste here, just the kind of toothpaste that costs a dollar. Li Douhui.

Toilet Cleaner, spray Toilet Cleaner, soak for a period of time (the longer the month) and scrub with a brush.

Stubborn urine alkali can be scrubbed with sulfuric acid soaking.

Pay attention to ventilation and wear a mask when brushing so as not to harm the body and respiratory system.

In fact, it is caused by improper maintenance.

Suggestion: Use a plastic bag with good texture, fill it with rag heads, and block the toilet drain so that the water in the toilet bowl does not flow away from the drain. Then fill the toilet bowl with an appropriate amount of strong acid and water (depending on the severity of the urine alkali), soak it for several hours, take out the filler and brush it.

Repeat it several times, the urine alkali in the toilet bowl will be removed, and then rinse with water, try it.

Stubborn urine smear in the urinal can be removed in the following ways:

1. Spread the toilet paper on the inner wall of the urinal one by one, then spray it with toilet cleaner or leftover Coke, let it stand for an hour, then rinse it off with water, and finally gently scrub it with a brush. Not only does this method require no strenuous brushing, but the cleaning results are also excellent.

2. Pour the mixture of vinegar and water into the toilet, soak it for half a day for a few hours, and then rinse it off with water, which can have the effect of disinfection and deodorization.

3. Sprinkle 1 2 cups of baking soda in the toilet bowl and brew with hot boiled water for half an hour to remove lighter dirt.

4. Before stubborn yellow rust spots appear in the toilet, clean them frequently with baking soda. Sprinkle baking soda on the inside of the toilet bowl for 10 minutes, then wash it with a toilet brush.

5. Put an appropriate amount of water in the toilet bowl first, clean it with a toilet brush, then pour in 5 10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush, and then scrub it. If the dirt is heavy, you can pour a little more detergent to soak and brush until it is clean.

There are two common approaches at present.

One is to remove by friction, using a metal brush, to remove the stain powder, which is very laborious.

One is chemical removal, which uses an acidic solution (such as hydrochloric acid, but it tastes bad). There are many brands on the market that have clean toilets, generally blue liquid, pour it up, after a period of time, it will be dropped by a brush, this is very collapsed and convenient at night without effort (that is, the taste is not very good at night), and it is sold in supermarkets.

Regular washing will not leave urine alkali, if it has been left, after removing it with a strong toilet cleaner, it is enough to keep it clean every day.

Pour some oxalic acid in it and it should be fine.

Hydrochloric acid, toilet cleaner, and 84 can all remove urine alkali.

If the urine alkali in the toilet is too thick, first prepare some cleaning tools and toilet cleaning agent, spray the toilet cleaning agent evenly in the place where the urine alkali is thick, wash it simply, and then wait for the urine alkali to completely dissolve, brush it again, and then rinse it with water, and dry it with a towel. Wear professional gloves and masks when washing to avoid direct contact with cleaning products.

To deal with urine alkali in the toilet, you first need to prepare some cleaning tools, such as toilet cleaning brushes, towels, etc., and then prepare toilet cleaning agent, and determine the amount of toilet cleaning agent according to the thickness of urine alkali. After spraying the toilet cleaner evenly on the urine alkali, you can start with a simple brush treatment.

After simple brushing, there is no need to clean it immediately, you can let it stand for 1 2 hours, wait for the urine alkali to completely dissolve, then spray a small amount of water, and then use a toilet cleaning brush to brush finely, pay attention to the edge of the toilet bowl and other dead corners that are easy to hide dirt and dirt. After brushing, open the toilet drain system, rinse both sides more, and finally dry with a towel or let it dry naturally.

When cleaning the toilet, you need to wear professional gloves, masks and waterproof aprons, because the smell of toilet cleaning products is unpleasant, and direct contact with the human body will cause damage, so special attention should be paid when scrubbing the toilet.

1. The main components of urine alkali are phosphate, inorganic substances, white matter, urea, etc., mainly alkaline substances, mainly due to urine concentration, which can be removed by using acid.

2. You can use cola to remove urine alkali, the main component of cola is carbonic acid, which will react with urine alkali to reduce urine alkali, for example, you can soak cola in the simple blind rock toilet by brushing the toilet, and then rinse, these urine alkali on the inner wall of the toilet will soon fall off for the purpose of cleaning. In addition, the removal of urine alkali can be used to clean the toilet, the main ingredient of the toilet cleaner is hydrochloric acid, in addition, it also has a surface active agent, which can eliminate the urine alkali, can remove the peculiar smell of the urine test, and can remove the bacterial propagules and viruses in the urine alkali, which has a good killing effect on these harmful substances.

3. Urine alkali is related to the usual diet, drinking more water at ordinary times can effectively alleviate the urine alkali components in the urine, do not use foods with too high alkali content.