Toilet bowl urine alkali thickness cleaning tips, what to use to remove the urine alkali under the t

Updated on society 2024-06-28
6 answers
  1. Anonymous users2024-02-12

    For removing urine alkali: Toilet cleaner containing acidic solution.

    When removing urine alkali, you can use toilet cleaners containing acidic solutions, which have both acidic substances and cleaning ingredients, which can better remove urine alkali and other residues.

    After putting the toilet cleaner into the flush toilet bowl that needs to be cleaned, and then closing the toilet lid and waiting for about an hour, a strong chemical reaction will occur between the toilet cleaner and the urine alkali to achieve the effect of removing the urine alkali.

    When using, the toilet cleaner and water can be mixed into different proportions according to the different cleaning environments that need to be cleaned, so as to reduce the corrosiveness of acidic substances and achieve the cleaning effect. Some people are more worried about whether the toilet cleaner is toxic, but it is actually toxic, and it is best not to get it on the **.

    Does removing urine alkali produce harmful gases?

    Removing urine alkali will produce harmful gases, so when using toilet cleaners, close the toilet lid and wait for the chemical reaction to occur, so as to avoid harmful gases spilling out and causing harm to the body. Because the toilet cleaner contains a large amount of strong acids, it is necessary to wear a mask and gloves when using the toilet cleaner to avoid direct contact with the skin and cause burns to the skin.

    After using the toilet cleaner, store the toilet cleaner in a dry and ventilated location that cannot be touched by children, so as to avoid irreparable damage caused by the leakage of the toilet cleaner.

  2. Anonymous users2024-02-11

    84 bubbles, and then wipe with a steel wire, and wash it many times, but you should pay attention to cleaning it frequently, so as not to make it difficult to clean up with too thick scaling.

  3. Anonymous users2024-02-10

    If the thickness is less than 1 mm, rinse it with clean water, then take an old towel or sponge, suck out all the water that can't be drained, and then pour about 800ml of hot vinegar. Soaking for a period of time can basically eliminate urine alkali. If it encounters too thick urine alkali, it must be carried out by a combination of mechanical removal and chemical removal.

    I personally handled such a toilet: because the users of the finch noise were two elderly tourists from the countryside, they pooped and flushed, and the urine was not flushed at all. It is said to save water.

    As a result, urine alkali accumulates and thickens in the siphon zone of the lower part of the stool. By the time I was called to clean up, I was so blocked that I couldn't even poop. After rinsing twice with clean water, use a towel to absorb the stagnant water in the siphon area.

    When I touched my finger, there was only a small hole that was not much thicker than my index finger. No wonder the poop can't go down. I found a flathead screwdriver with a long handle and put it on the dirt and hit the tail of the screwdriver with a hammer.

    The force should be appropriate: if you are light, you can't knock the urine alkali, and if your hand is heavy, you will smash the porcelain. After knocking like this for half an hour, the thickest urine alkali was knocked down by nearly two centimeters.

    What should I do if the inner siphon elbow can't be knocked out? Soak with dilute hydrochloric acid. Pour about 7 to 800 ml of dilute hydrochloric acid into the toilet siphon area until the liquid level does not rise as the amount of hydrochloric acid poured increases.

    It can be seen that there are small bubbles on the liquid surface, indicating that hydrochloric acid has reacted with urine alkali. Soak overnight, and then rinse with a pot of boiling water the next morning, and there is no trace of urine alkali. I tried to poop once, snorted, and washed clean.

  4. Anonymous users2024-02-09

    1. It can be cleaned with oxalic acid and dilute hydrochloric acid solution. Pour the oxalic acid or dilute hydrochloric acid solution into the pipe, and rinse it with a brush or water after about 20 minutes.

    2. It can also be cleaned with dilute sulfuric acid solution. Pour the dilute sulfuric acid solution into the pipe and rinse it with a brush or water after about 20 minutes. Use a harder brush to remove the dirt, and then use clean water to clean the dirt.

    Principle: Because the dirt in the toilet is an alkaline substance, especially urine alkali, oxalic acid is an acidic substance, and the principle of acid-base neutralization is used to deal with the dirt, so it is very convenient to clean the toilet dirt.

  5. Anonymous users2024-02-08

    White vinegar cleaning: Fill the toilet bowl with water, then add white vinegar and stir well, let it stand overnight, and then use a toilet brush to scrub it.

    Toilet cleanup: Spray the toilet cleaner evenly on the toilet bowl and wait for an hour or two. Gently brush the surface with a brush.

    Baking soda and toothpaste cleaning: Mix baking soda with toothpaste and water evenly, then use a toilet brush to dip and scrub, and wash it several times.

  6. Anonymous users2024-02-07

    Toilet urine alkali thick cleaning tricks, white vinegar cleaning, disinfectant cleaning, soda toothpaste cleaning.

    1. Clean up the white vinegar.

    The toilet bowl is thick with urine alkali and needs to use white vinegar to clean up, first fill the toilet bowl with water, then pour the white vinegar into it, mix well, white vinegar is acidic, and urine alkali is alkaline, the two will produce a neutralization reaction after they meet, after standing overnight, use a toilet brush to scrub it.

    2. Disinfectant cleaning.

    The toilet urine alkali thickness can be cleaned with disinfectant, the disinfectant has a strong ability to decontaminate and white, spray the disinfectant on the urine alkali dirt of the toilet, let it stand for a while, wait for the urine alkali and the disinfectant to react, use the toilet brush to scrub, and finally rinse with water.

    3. Soda toothpaste cleaning.

    The urine alkali thickness of the toilet bowl can be cleaned with disinfectant, mix the soda, toothpaste and water well, and then use the toilet brush to dip the mixture to scrub the urine alkali dirt on the toilet, basically brush it clean, and then pour the mixture into the toilet, let it stand for 1 hour and then brush it again.

    Toilet

    The toilet is also called a toilet, and the invention of the toilet is known as a great invention, which solves the problem of people eating and drinking in and out of Lazar. According to the matching method of the toilet seat, it can also be divided into ordinary toilet and smart toilet. Smart toilets can also be further divided into automatic set change smart toilets and non-automatic set change toilets, the former includes automatic set change plus flushing, automatic change set with flushing and drying and other different types.

Related questions
18 answers2024-06-28

As there is not a side in front and cannot be knocked along the edge, it is more troublesome to change the taper to the urine alkali in the waterproofing bend. >>>More

18 answers2024-06-28

You can use cola to remove urine alkali, the main component of cola is carbonic acid, it will react with urine alkali to reduce urine alkali, for example, you can soak cola in the toilet bowl by brushing the toilet, and then rinse, these urine alkali on the inner wall of the toilet bowl will soon fall off, for the purpose of cleaning, in addition to the removal of urine alkali, you can use toilet cleaner, the main ingredient of toilet cleaner is hydrochloric acid, in addition, it also has a surface active agent, which can eliminate urine alkali, can remove the odor of urine alkali, and can remove the bacterial propagules virus in urine alkali, It has a good killing effect on these harmful substances.

10 answers2024-06-28

Urine and water shocks can also form foamy urine, and the toilet bowl and urinal have different strengths.