How to clean the indoor unit of an air conditioner? How to clean the indoor unit of the air conditio

Cut off the power, open the air conditioner case, remove the dust filter, and clean the evaporator with tap water to ensure that the surface of the evaporator is completely covered with cleaning foam, thus disintegrating the stubborn dirt on the fins of the air conditioner evaporator. Then, wipe it clean with a soft cloth and reinstall the dust filter. Turn on the air conditioner for 15 minutes to allow the air conditioner to start cooling and at the same time allow the air conditioner's evaporator to produce condensate.

Then turn off the air conditioner and cut off the power to ensure safety; Open the air conditioner shell, remove the dust filter, and clean it with tap water; Clean the evaporator. If there is heavy dust on the fins of the evaporator, you can clean it with a fine soft brush first. Then spray the air conditioner cleaning agent on the surface of the aluminum heat transfer fins and coil on the evaporator fin to ensure that the cleaning foam completely covers the surface of the evaporator; After about 15 minutes, the aircon cleaner will completely penetrate the reaction, fully disintegrating the stubborn dirt on the fins of the aircon evaporator, and then wipe it clean with a soft cloth; Reinstall the dust filter, cover the air conditioner case, and gently wipe the air conditioner panel with a soft cloth dipped in warm water.

Do not use too much force to avoid damaging the coating on the panel; Turn on the air conditioner, turn the air volume and cooling capacity to the maximum, and keep the air conditioner on for 10 to 20 minutes to allow the sewage to drain out of the drain. The answer applies to most air conditioner models like the Xiaomi KFR-51LW.

The main steps are as follows:

1. Turn on the air conditioner for 15 minutes before cleaning the air conditioner, so that the air conditioner can start to refrigerate, and at the same time make the air conditioner evaporator produce condensation. After that, turn off the air conditioner and cut off the power to ensure safety.

2. Open the shell of the air conditioner, remove the dust filter, and clean it with tap water.

3. Clean the evaporator, if there is heavy dust on the evaporator fins, you can use a fine soft brush to remove it first. Then spray the air conditioner cleaner on the surface of the aluminum heat transfer sheet and coil on the evaporator fin to ensure that the cleaning foam completely covers the surface of the evaporator.

4. After about 15 minutes, the air conditioner cleaner will completely penetrate and fully disintegrate the stubborn dirt on the fins of the air conditioner evaporator, then wipe it clean with a soft cloth.

5. Reinstall the dust filter, cover the shell of the air conditioner, and then gently wipe the panel of the air conditioner with a soft cloth dipped in warm water, do not use too much force, so as not to damage the coating on the panel.

6. Turn on the air conditioner, adjust the air volume and cooling capacity to the maximum, keep the air conditioner on for 10 to 20 minutes, and let the sewage be discharged from the drain pipe.

The method of cleaning the indoor unit of the air conditioner is as follows:Material Tools: air conditioner, water gun, watering can, screwdriver.

1. Remove the air conditioning outlet baffle.

2. Start to remove the filter.

3. Take off the filter screen and filter box.

4. Clear the stuffiness and wash the filter first.

5. Then take the air conditioner unit outdoors and pick up the upper panel of the air conditioner.

6. The radiator should be removed.

7. Start cleaning the inside of the air conditioner with a water gun.

8. Use a watering can to clean the edges and corners carefully.

9. After cleaning, use a screwdriver to assemble the internal machine.

10. Cover the upper panel of the air conditioner, and the air conditioner will be cleaned up.

The method of cleaning the indoor unit of the air conditioner is as follows:

First of all, the air conditioner should be turned off from power, and then some cleaning tools should be prepared.

Open the front cover of the air conditioner directly, there is a dust cover inside, after taking it off, wash the dust on it with clean water first, and then wipe it back and forth with a brush a few times.

There are also some corners of Xiaodou Town that are not easy to touch in the interior of the air conditioner, so you can directly use a brush to clean it up, or find a cotton swab to clean it.

If you have a vacuum cleaner at home, you can use a low-power vacuum cleaner to suck out the dust inside. During the construction operation, you can wear a dust cover to prevent inhaling a lot of dust.

What are the benefits of cleaning an aircon filter?

1. Cleaning the air conditioning filter can effectively prevent air conditioning diseases.

2. The filter screen of the air conditioner is mainly to filter the dust in the air, it will be blocked if it is not cleaned for a long time, and the dust cannot be filtered after it is blocked, and the natural wind that blows out contains dust, which is harmful to human health.

3. Regularly clean the air conditioner filter screen, which can keep the air conditioner's lighting and cooling effect good, and the air supply of the air conditioner will not have peculiar smell, clean and refreshing.

4. Cleaning the air conditioner filter can also prolong the service life of the air conditioner.

Air conditioner cleaning methods and procedures.

1. You need to clean the shell of the air conditioner first, the shell may appear yellowing due to the long use time, which is relatively normal, and the shell is easy to accumulate dust, so pay attention to the dead angle while cleaning the top of the air conditioner.

2. After the shell is cleaned, the shell should be opened to clean the inner empty key thick filter, there is a buckle on both sides of the air conditioning shell, and the filter screen can be taken out by pushing by hand, at this time, you may find that there is more dust on the filter screen, and you can rinse it with tap water on the back of the filter.

3. When cleaning the air conditioning condensate, you need to use the air conditioning cleaning agent, at this time, the cleaning agent is evenly sprayed on the condenser, and the air conditioning shell is closed after completion, and the quality air volume is adjusted to the maximum for about 10 minutes, at this time, the dust will be discharged outside with the air conditioning drainage.

4. Clean the air conditioner radiator.

Cleaning the indoor unit of the air conditioner is a necessary step to maintain the effectiveness of the air conditioner, and it should be cleaned frequently to keep the air clean and healthy. There are some details that need to be paid attention to during the cleaning process, which are as follows:

1.Turn off the power: In the process of cleaning the indoor unit of the air conditioner, the power of the air conditioner must be turned off first to avoid the risk of current leakage and injury to people.

2.Remove the filter: The filter screen of the indoor unit of the air conditioner is easily polluted by dust, stains and other substances, so the first step is to remove the filter screen and then rinse it with clean water.

3.Soft brush cleaning: Use a soft brush to remove the dust on the internal structure of the indoor unit, you can use a dust collector to vacuum it, and you can also wipe the surface of the cabinet with a clean towel.

4.Wipe and clean: You can use a soft cloth to wipe off water vapor, sweat and other stains; Dusty areas can be sprayed with some detergent, spread evenly and wipe with a cloth.

5.Mild detergent cleaning: If you need to remove dirt or sticky dirt such as oil and oil stains, it is recommended to use a mild detergent that is not acidic or weakly alkaline.

Finally, clean the dismantled filter and indoor unit and put them back in place. Through the above steps, we can keep the indoor unit of the air conditioner clean, which can not only increase the service life of the air conditioner, but also reduce the pollutants in the air and provide protection for our health.

First open the cover of the inner shell, there are three screws on the lower edge of the wind deflector, first remove the three small covers on the top to see, and then there are two screws next to the display board to remove, and there is also an electric board box cover next to it.

Then remove the sink, the left and right activities are also bayonets, just pull out the socket on the top of the smile, so that you can clearly see the wind wheel, seal the circuit board with a plastic bag, and flush it with a high-pressure water gun.