After the computer smokes, the boot is not good

In my experience, if you plug in the memory module and misoperate, the motherboard burns out, it is recommended to reinstall the system, if this still happens, it is the motherboard burned out!!

We know that when inserting a memory module, you can't plug it in backwards, you have to hear a "click" sound, in addition, many users are enthusiastic about adding memory, however, we have to consider whether the two memory modules are one model, sometimes there will be incompatibility problems, and, some computer power supply is not good enough, adding an extra memory module will increase the burden of the power supply, resulting in insufficient voltage of the CPU power supply part, so that the CPU fan speed slows down, and the CPU temperature will slowly rise, to a certain extent, the system in order to protect the CPU, It will automatically restart to prevent the CPU from burning out, which is the reason why some people often cause the computer to restart automatically after using it for a while after adding a memory module!!

Different models of memory cannot be used at the same time, and the rated voltage is different, and the smoke proves that the memory slot must be broken. You just boot with that good memory to try.

If that doesn't work, unplug all the memory cards on the motherboard and reinstall them. Try again.

Check the memory slots, contact points for dirt.

Restore the BIOS to its default values and try again.

Plug in memory with power.

Brother, you are really ...

"Strong" is just one word.

The memory is burning!

You're too ruthless

The computer can even get to the XP screen.

Try a different motherboard.

The problem is not big, it may be that there is a bad contact with various interfaces, re-check the interfaces of each hardware and then try, when it doesn't work, find a bar to make sure that it is a normal memory to try it. If it doesn't work, reinstall the system! If it doesn't, it could be a big problem. Take it to a professional maintenance department.

Reinstall the system, the hardware should be fine.

Take a look at the system restore, and if it doesn't work, reinstall the system.

There is a problem with the motherboard, send it for repair.

How much of the sports lottery should be collected in the provincial capital?

If the computer at home smokes for unknown reasons, you should avoid the front of the screen to avoid the screen from hurting people. Electrical appliances smoke is mostly burned out by the alternating current part, and accompanied by a short circuit, first of all, the power supply must be cut off, and non-professionals should not be repaired, so as to avoid electric shock.

Computer smoke failure analysis:

1. The power cord smokes, the power is off, and the damaged power cord is replaced.

2. The power supply of the host is smoking, the power is off, the power supply of the host is replaced, and the power supply with serious damage is generally not repaired.

3. The motherboard and graphics card are smoking, mostly the capacitor bursts and smokes, and the motherboard is repaired or replaced.

4. The display is smoking, and the display is repaired, and the power strip of the display is mostly damaged.

Extended Information: Computer Smoke **Measures:

1. Cut off the power supply by air.

The computer should be turned off in time and the power cord should be unplugged so that the fire can be extinguished.

2. Stay away from smoking computers.

When the computer is on fire, there is often a phenomenon of heating up in the components of the computer host, and the phenomenon of toxic gas, and the display screen and display tube may also occur, so we should wrap the computer with a wet towel or carpet after cutting off all the power supply, so as to prevent the smoke from overflowing, and the glass fragments of the fluorescent screen can also be blocked to prevent injury.

3. Don't make friends splash water.

Be sure not to splash water on a computer that is on fire, this is a very dangerous thing, even after unplugging the power cord, there may be some residual current in the computer, if splashed with water, it is easy to get electrocuted.

1. When the computer starts to smoke, immediately unplug the power plug or turn off the main power switch. Then cover the computer with a wet blanket or quilt, etc., so that the rock can not only stop the spread of the fireworks, but also block the glass shards of the fluorescent screen.

2. Do not splash water on the computer that is on fire, even if Muyun has turned off the power of the computer. This is because a sudden drop in temperature can cause the red-hot CRT to burst. In addition, there is still residual current in the computer, and splashing water may cause electric shock.

3. Do not lift the covering**, when extinguishing the fire, in order to prevent the picture tube from hurting people, you can only approach the computer from the side or back.

This situation indicates that the computer has been overloaded, if the acorn can still open the machine normally, turn off the computer as soon as possible, and check what is burning out inside. It is very likely that the electric source is broken, and it needs to be repaired by a professional.

Smoke from the computer host indicates that the internal hardware of the host computer is caused by short circuit or burnout of electronic components due to aging, misconnection, etc.

Dealing with the Qingxun method:

1. Interrupt the power supply of the host as soon as possible to avoid further damage;

2. Since it is not clear which part of the smoke is missing, the chassis should be disassembled only after the smoke is eliminated to prevent the capacitor from bursting and the liquid splashes and injures people;

3. Preliminary check whether the motherboard, memory, host power supply, and internal connecting wires are normal, and whether there are conductive substances adhering to the surface;

4. Send it to professional maintenance personnel for maintenance.

It can't start just with smoke, what's going on?

1. Low engine temperature: If white smoke is emitted when starting in winter, the engine temperature is generally too low and has not yet reached the state; 2. There is water in the oil supply system: if you put your hand behind the exhaust pipe, the white smoke will form water droplets when it passes over the hand surface, indicating that there is water in the oil supply system; 3. The air pressure in the engine cylinder is low

If the engine emits white smoke at low temperature, and black smoke comes up after the temperature rises, it means that the air pressure in the cylinder of the engine is too low; 4. Low fuel injection pressure: If the engine emits gray-white smoke and the vehicle accelerates weakly after starting, it means that the pressure of the fuel injection system is too low.