What should I do if the Apple X screen is not good?

If the screen of the Apple mobile phone is not good, then the easiest way is of course to change the screen.

It is recommended that it is best to take the phone to Apple's after-sales outlets to check it and see what the specific problem is**? If it's really flat, then it's best to change the screen or change the phone directly.

If the Apple X screen is not good, you can go to a professional mobile phone repair shop to replace the mobile phone screen.

1. When using, if the screen fails, you can press and hold the home button in the lock screen state and then you can enable the voice control function. Then at this time, say "****" to select ** song, and then select the touch function to resume. You can wait a while, and then you can see that the touch screen issue is fixed.

2. You can also wait for the power to run out, and it will enter the state of automatic shutdown. Charge at this time, and then resume operation on the touch screen when the device is turned on.

3. You can connect your iPad to iTunes, and then you can upgrade your iPad to the latest version of iOS. (Jailbroken users need to note that iOS version upgrade cannot be done directly on iTunes).

Causes: 1. Screen hardware problems.

2. Cable failure.

3. System version bugs.

Summary. Kiss! Hello, a blessing, a warmth, a touch.

Have a grateful heart. Life is full of touching! Your question has been received, it will take a little time to type, please wait a moment and please do not end the consultation.

You can also take this time to provide more effective information so that I can better answer for you. Hope mine can solve your problem and sort out the answer for you right away, please wait a moment!

What's going on with the Apple X part of the screen malfunctioning.

Kiss! Hello, a blessing, a warmth, a touch. Have a grateful heart.

Life is full of touching! Your question has been received, it will take a little time to type, please wait a moment and please do not end the consultation. You can also take this time to provide more effective information so that I can better answer for you.

Hope mine can solve your problem and sort out the answer for you right away, please wait a moment!

Hello dear! I'm a little expert in life, and I'm glad to answer for you! <>

Tongtong found out for you that part of the screen failure of Apple X may be a malfunction of the mobile phone, you can deal with it like this!

1. Use a clean paper towel to wipe off the water droplets and other dirty things on the iPhone X screen. If the water droplets fall on the screen, the iPhone will mistake the user for touching the screen; 2. After wiping it clean, it still fails, it may be a software or system failure, press and hold the power button, slide to shut down, and then restart;

3. If you can't slide to shut down due to screen failure, you can force restart. The method of force restart is as follows: (1) Press the "Volume +" button first; (2) Press the "Volume-" button once; (3) Finally, press and hold the power on/off key until the phone restarts;

4. If the screen is still out of order after restarting, then it is likely to be a hardware failure and you need to find Apple after-sales maintenance.

Do you have any other questions? I can go on and answer for you

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

[Warm].

Sometimes the touch screen fails because there is too much dust on the screen. Find a cloth to wipe your glasses and clear the screen of your iPhone. 2.

It may be that there is water residue on your hands, which makes the touch screen insensitive, so try to keep your hands dry when using your phone. 3.It may be caused by the poor quality of the mobile phone film, please remove it and replace it with a mobile phone film at *** point.

4.Sometimes the touch screen does not work and it is related to the iOS system, please upgrade the iOS system to the latest version. Upgrade to the latest version of iOS.

Hello question. My iPhone X has been replaced with the original screen of the phone given by a friend, why is it unresponsive when touched?

My iPhone X has been replaced with the original screen of the phone given by a friend, why is it unresponsive when touched?

If there is a problem of screen failure after applying the film, you can remove the film and use it again for comparison or send it to the customer service center to reapply the film.

If the mobile phone has static electricity and causes the screen to malfunction temporarily, you can gently wipe it with a damp soft cloth;

The question was not touched.

It can be used normally without touching before replacement. And then after you changed it, there was no response to the contact, right?

Ask the question: Yes. Yes, it could be a problem with the screen, or something wrong with the system.

But the problem with Jay is that it could be your membrane.

It is recommended that you first remove the screen film that you are currently using Nana, and then change the previous one to see if it can be used normally? If not, it is best to go to the after-sales service in time to repair it, so as not to destroy the normal system inside.

It turned out to be normal to ask questions and change meetings.

It's normal to change the meeting.

That's because the membrane doesn't match or there's something wrong.

As long as it's not a problem with the system, it's okay, you can buy a new screen and try it out.

It should be fine.

Summary. 1.Sometimes the malfunction is caused by too much dust on the screen. The solution is very simple, first, find a glasses wiping cloth; Then, wipe your iPhone screen.

2. Use the touch screen immediately after having water on your hands or applying hand cream, which may also cause the screen to fail. So dry your hands when using your phone.

3. If your mobile phone protective film is more rubbish, tell the truth, tear it off and change it to a *** point.

If none of the above reasons are not).

4. Then please turn off and turn it back on. Needless to say, how to do it.

5. If it can't be turned off, then wait for the phone to run out of power and automatically shut down, and then charge and turn on to resume the touch screen operation.

6. If it is useless to restart the phone, it must be the hardware is broken, and you can send it for repair!

What's going on with the Apple X part of the screen malfunctioning.

1.Sometimes the malfunction is caused by too much dust on the screen. The solution is very simple, first, find a glasses wiping cloth; Then, wipe your iPhone screen.

2. Use the touch screen immediately after having water on your hands or applying hand cream, which may also cause the screen to fail. So dry your hands when using your phone. 3. If your mobile phone protective film is more rubbish, tell the truth, tear it off and change it to a *** point.

If none of the above reasons are true) 4. Then please turn off and then turn it back on. Needless to say, how to do it. 5. If it can't be turned off, then wait for the phone to run out of power and automatically shut down, and then charge and turn on to resume the touch screen operation.

6. If it is useless to restart the phone, it must be the hardware is broken, and you can send it for repair!

If this answer is helpful to you, you can end the consultation and please click on the evaluation of five little stars Thank you very much! If you have any questions, you can leave a message or consult again, and I will do my best to help you

After the iPhoneX phone screen fails, you can do a screen correction on the phone.

1. Open the homepage of iPhoneX, find the Settings app icon in the lower right corner, and click Enter;

2. Under the settings menu bar, click the "General" option to enter;

3. Then swipe down the interface, find the accessibility options, and click the left mouse button to enter;

4. On the Accessibility page, find the Touch Adjustment option and click "Touch Adjustment" to enter;

5. After entering, turn on the button switch behind the touch adjustment, and the iPhoneX phone will automatically perform screen calibration to fix the screen touch failure.