-
5 Short **Processor (CPU) error. Check if there is a problem with the CPU socket, and if there is no problem, put the CPU on another motherboard and try to see if it is normal.
Computer abnormal alarm sound:
1. Short: Memory flush failed.
2. Short memory ECC verification error.
3 Short System base memory (first 64kb) check failed.
4. Short: The system clock is wrong.
5 Short **Processor (CPU) error.
6 Short Keyboard controller error.
7. Short: The real mode of the system is wrong and cannot be switched to protection mode.
8 Short: Shows a memory error (shows that the memory may be broken).
9. Short ROM BIOS checksum error.
1 long 3 short memory error (memory corruption, please replace).
1. Long 8 short display test error (the monitor data cable is loose or the graphics card is not plugged in steadily).
Award (Phoenix) BIOS Alarm Sound Meaning (Version number is different from old to new, and the meaning of the alarm sound is different).
No alarm sound: There may be a problem with the power supply, motherboard, or PC speaker. Check whether they are in contact with each other or replace the corresponding parts.
1 short tone: This is the normal tone.
2 short tones: Caused by the wrong CMOS setting, re-set the CMOS, generally call the default settings.
1 long and 1 short: The memory and motherboard are faulty, which is generally a compatibility problem, and the memory is replugged and unplugged.
1 long and 2 short: The display is wrong, generally because the graphics card is in poor contact with the AGP slot, or the display data is connected at the end, or it may be that the graphics card or video memory is physically damaged.
1 long and 3 short: The keyboard controller is incorrect, first try to change the keyboard.
1 long 9 short: Motherboard flashram or EPROM error (BIOS chip is damaged), try to replace or re-flash.
Long ringing: The memory module is inserted at the end or is not in good contact, it has been damaged, and the memory is re-inserted or replaced.
Ringing: The power supply and the monitor are not properly connected to the graphics card.
Repeat Short Ring: Power.
No Sound No Display: Power.
-
I guess you use IE7, which takes up a lot of memory, so it's easy to crash back to IE6
-
It is estimated that the memory module is loose, so take it down and wipe the gold finger and reinsert it!!
-
award bios
1 Short: The system starts normally. Congratulations, there is nothing wrong with your machine.
2 Short: General error, please go to CMOS Setup and reset the incorrect options.
1 long and 1 short: There is an error in the memory or motherboard. Try to change the memory, if it still doesn't work, you have to replace the motherboard.
1 long and 2 short: The display or graphics card is wrong.
1 long and 3 short: The keyboard controller is wrong. Check the motherboard.
1 long 9 short: Motherboard flash RAM or EPROM error, BIOS corruption. Try changing the block of flash ram.
Constant ringing (long sound): The memory module is not plugged in tightly or is damaged. If it still doesn't work, you can only replace a memory module.
Ringing: The power supply and monitor are not properly connected to the graphics card. Check all the plugs.
Repeated, short ring: There is a problem with the power supply.
No sound and no display: There is a problem with the power supply.
ami bios
1. Short: Memory flush failed. Replace the memory module.
2. Short memory ECC verification error. Setting the memory option for ECC check to disabled in CMOS setup will solve the problem, but the most fundamental solution is to replace a piece of memory.
3. Short: The basic memory of the system (the first 64KB) failed to be checked. Change memory.
4. Short: The system clock is wrong.
5 Short **Processor (CPU) error.
6 Short Keyboard controller error.
7. Short: The real mode of the system is wrong and cannot be switched to protection mode.
8 Short: A memory error is displayed. If there is a problem with the display memory, try changing the graphics card.
9 Short: ROM BIOS check and error.
1 long and 3 short: memory error. If the memory is damaged, it can be replaced.
1 long and 8 short: A test error is displayed. The monitor cable is not plugged in properly or the graphics card is not plugged in properly.
-
I hope it can help you The possibility of general hardware problems is not very likely If the computer starts up and beeps, but after entering the operating system, it stops ringing and can be operated, then usually it is the sound card driver has a problem The easiest way is to update the sound card to solve the above problems.
-
Is it a regular ring?,If it's supposed to be a memory thing.,Take down the memory and erase the gold finger with an eraser.。
There may be a memory parity error. You can go to the CMOS settings and turn off the memory parity option, that is, set it to disabled. However, in general, the memory module has parity and turns on parity in the CMOS setting, which is good for the stability of the microcomputer system. >>>More
It should be judged by the sound of the alarm.
1. Short: Memory flush failed. >>>More
There should be a problem with the power supply.
Here are the various alarm sounds: >>>More
It may be that the memory is not plugged in there.
1. If it is a CRT (picture tube display), then.
1) CRT automatic shutdown (CRT's indicator lights are off), the problem is: >>>More