Konka LED42M3400PDE has wifi and can t be connected

Dear users:

Hello! Thank you for your support of Konka products! to provide feedback based on you; Konka LED42M3400PDE TV needs to be wirelessly connected to the Internet, and it needs to be equipped with a wireless network card. The specific steps are as follows:

Wireless connection: 1. Wireless connection needs to be matched: wireless network card (wireless network card needs to be purchased and matched by the user, if the built-in wifi does not need a wireless network card), wireless router, computer, network TV.

2. After the wireless router and the computer can be connected to the network normally, please connect the wireless network card to the TV (no driver, can be installed and used directly).

3. TV menu-Network Settings-Wireless Settings-SSID(Search for router devices)、Encryption type(Same as set on the computer)、IP typeSelect automatic getting,Finally, click Settings。

In addition,The wireless router settings that our TV can recognize are:Adopt WEP encryption method,The settings are as follows:The authentication method is selected as Open, WEP encryption is selected64bit, the key mode is selected ascii, any key can be set, and the password needs to be set 5 digits。

Alternatively, use WPA encryption and set the following parameters: set the password type to TKIP, select PSK EAP to PSK, and set the password to 8 digits. Passwords are recommended to be purely numeric.

What type of wireless network card does this TV need to be equipped with,You need to provide the material number of the TV (material number,Generally in the lower left corner of the back of the machine manual3904Beginning),In order to answer for you more accurately。 Or you can log on to Konka's official website** for consultation.

Dear users:

1. Wireless connection needs to be matched: wireless network card (wireless network card recommended chip model RTL8191SU, RTL3070, RTL8712, and there are no specific requirements for wireless routers), wireless routers, computers, network TVs.

2. After the wireless router and the computer can be connected to the network normally, please connect the wireless network card to the TV (the wireless network card is the above recommended chip model, no driver, and can be installed and used directly).

3. TV menu-Network Settings-Wireless Settings-SSID(Search for router devices)、Encryption type(Same as set on the computer)、IP typeSelect automatic getting,Finally, click Settings。

Note when the wireless connection cannot be connected:

1. Please make sure that the wireless router and wireless network card used are normal and can be used.

2. The signal strength of the wireless network is too low (when the strength of the wireless network you use is less than 35%, although our machine can detect the network, it cannot be successfully connected.) In order to ensure the normal use of the wireless network, the signal strength is required to be stable at more than 70% or more than two bars. ）

3. When there is a wireless connection, you can search for the signal, but the connection fails, you need to check: encryption type, WEP length, and whether the WEP mode settings are correct. Please confirm the parameters set by the encryption method,Our TV can be recognized normally:

a) Use WEP encryption mode, set as follows: open for authentication mode, 64bit for wep encryption, ASCII for key mode, any one key can be set, and the password needs to be set to 5 digits. (b) WPA encryption is adopted, and the settings are as follows:

Set the password type to TKIP, select psk for PSK EAP, and set 8 digits for the password. (Note: The password is recommended to use the number 0-9 for easy identification of the TV).

Dear users:

Hello, sorry for the inconvenience caused by the product! Here's how to connect wirelessly:

1. Wireless connection needs to be matched: wireless network card (wireless network card needs to be purchased and matched by the user, if built-in wifi, no wireless network card is required), wireless router, computer, network TV.

2. Set the encryption parameters of the router. It is recommended that you use the WEP encryption method, and set the following settings: open for authentication mode, 64bit for wep encryption, ASCII for key mode, any one key for one, and 5 digits for password.

Or use WPA encryption mode, set as follows: TKIP for password selling caution type, PSK ESK for PSK, and 8 digits for password. Passwords are recommended to be purely numeric.

3、Turn on the TV and enter Settings-Network-Wireless Settings-SSID Select the name of your router,There will be a dialog box popping up,Prompt you to fill in the password,Click Settings first after entering,Then click Network Detection。 If the TV prompts that the network has been restored and the network has been connected, it means that the TV has been successfully connected.

In addition, please check the machine manual-feature description-feature column, whether there is a "built-in wireless wifi network function", if so, you can directly connect to the wireless according to the above way. If not, it is recommended to use the RTL8191SU, RTL3070, and RTL8712 wireless network cards as the main chip. Thank you for your consultation and have a great day!

Dear Konka users:

Hello, thank you for your support to Konka! LED42M3500PDF is Konka network TV, this TV is not a digital-analog all-in-one machine, please connect an external set-top box to watch signal programs. Thank you for your consultation and have a great day!