Does the designer of the decoration company have the ability to design and seal on behalf of the fir

I come to this question that fire protection is not an independent profession, it is a whole profession formed by the synthesis of various professions. The most basic consists of: A, water B, electricity C, gas D, air E, sunshine F, housing structure design G, interior design H, architectural design I, **dredging, etc.

Generally, these more than a dozen professions together can make a professional, safe fire design, the lack of a small piece of knowledge will leave a great safety hazard, in the design, the general decoration designer company professional mainly belongs to the decoration of this piece, it may not have the ability of fire design, unless it is a fairly large team of various professional collections to design, otherwise it may be difficult to achieve. Decoration companies generally do not have such talents, if proficient in these dozen professional personnel together the price is generally not less than 40,000 yuan a month, from the financial point of view, the general decoration company is not able to pay, only professional fire companies, professional design institutes, formal agency companies have this ability. Regularity is:

1. The office address will not be in the residential area.

2. Its departments are complete with regular bills.

3. There is an official **.

4. The seal is complete, and there is generally a special person to handle special projects.

5. There are telecom mobile real-name landline mobile phones.

6. **Generally professional and targeted, it will not be chaotic without understanding the actual situation**.

7. An enterprise that has survived for many years.

Decoration companies will not spend such a large amount of money to support this group of people, in the generation, stamping this piece of decoration companies generally will not have this a service project, if there is that it is generally high price and low efficiency, after all, this is not their business, only a regular agency company, and professional fire protection company, only the ability from fire design to fire seal on behalf of the fire certificate of the entire set of full service. And can achieve customer requirements.

Clause. First, the design qualification of the company must be required for fire protection design;

Clause. Second, the designer must have a professional certificate to design the profession;

Clause. 3. The seal can only be stamped with your own seal;

Clause. Fourth, the substitution and other powers you want can only be authorized to you by your company, and you can have them.

The person in charge, who is also the registered architect, must be stamped, as well as the stamp of your company or design institute.

If you want to stamp, it's just a form, just stamp a designer seal and a company stamp, anyway, I don't review the seal, I reported it so.

I haven't heard of it, is it Beijing, anyway, I didn't need it a month ago.

The design bears the responsibility of design, the construction bears the responsibility of construction, and the supervision bears the responsibility of supervision. **Assume regulatory responsibilities.

This is a must, and the drawings you apply for approval must be stamped by the company with design qualifications, otherwise it is not good At present, the fire protection is relatively strict, if you can find someone, it is okay, if you go through the formal procedures, it is very troublesome, headache.

Answer: The decoration design drawing needs to be stamped by the design institute with fire protection design qualification when reporting for fire protection.

The decoration drawing part is stamped with the decoration design seal when declaring, and the fire protection drawing part is required to have the fire protection design seal at the time of the declaration, and the two must have quality qualifications, and the decoration belongs to the decoration The fire protection part is independent of the fire protection So the two design qualification seals must be covered, I hope to help you.

As far as renovation is concerned, your aspects related to fire protection should involve the stamping of the unit, such as the performance test inside your fire door, and your ground.

The test of the blanket and the fire resistance time of your roller shutter door should be accepted by the fire brigade after the preliminary inspection of a special qualified fire company, in which the signature of the builder, the designer and the construction party must not be missing.

Qingdao Guangsheng Yuanlai Fire Installation Engineering Co., Ltd.

The company's BAI qualifications are complete, decoration design qualifications, decoration construction.

Zhi qualification, anti-epidemic design qualification, fire construction qualification, supervision qualification. Provide business licenses, qualification certificates, organization certificates, legal person ID cards, business personnel qualification certificates and ID cards. Guaranteed to pass the fire audit.

This is the two design units need to be stamped, if the decoration design drawings are confirmed by the original design unit, only the fire protection design unit can be covered.

Places involving public safety need to carry out the design and construction of fire protection facilities, and fire protection design is a qualification of the design institute, which needs to be reported to the relevant departments to obtain before engaging in fire protection design, and can use the fire protection design qualification seal. If you don't have a design institute, you can ask a qualified design institute to design, and then stamp their qualification seal.

It is necessary to have the qualification of the local record design institute, and you can only find the fire protection design seal or the qualification web link.

Fire Design Chapter. That is, a design institute or a fire design company with fire protection design qualifications.

Cover with the corresponding design qualification unit of the drawing special seal.

It is the qualification seal for you and your unit to do the design.

Fire protection design companies can handle qwnh-com

The designer seals it to see who is entrusted by the contract to do the fire protection design, and the additional entrustment needs to be handled according to the general design contract, and the subcontractor seals it.

The design quality shall be responsible for the fire protection design unit, and the fire protection construction order shall only be responsible for the secondary design deepening (according to the contract requirements) and the construction and installation quality.

The decoration company does not have fire protection design qualifications, and the seal is used for p?

Yes, according to the requirements of the fire protection design code, the fire protection design needs to be designed by a qualified design institute, and then a formal design report is issued, and after being stamped with the official seal, it is submitted to the fire department for approval.

Fire protection design documents are generally provided by the design institute, but as far as I know, there are no relevant explicit regulations. However, it is more professional for the design institute to provide fire protection design documents, so in addition to the fire protection filing application form filled in by the construction unit, the fire protection design documents should still be prepared by the design institute, and the design qualification certificate (copy with seal) and design drawings should be provided.

Fire protection design documents, including fire protection design articles, need to be stamped with the official seal of the design unit!

The decoration drawings and fire protection drawings are stamped separately. Designer signatures, etc. Design qualification documents are also attached.

What is required is the stamp of the design unit and the qualification stamp of the designer.

The design of fire protection drawings refers to the design specification of fire protection engineering for fire protection, the design drawings of relevant professions, the main fire protection equipment, fire protection products and building components and building materials with fire performance requirements, focusing on the content of the design in accordance with the mandatory requirements of the national fire protection technical standards for engineering construction.

Yes, it must be stamped with the official seal of the design unit.

The fire protection design documents of the decoration project need to be stamped with the official seal of the design unit.

u..

Do you have fire protection construction qualifications? Qualifications were not addressed first.

It is very troublesome to report for fire review, and the picture is as follows:

Sprinkler, fire weak current, smoke detector.

Emergency lighting, safety exits, emergency exits.

These designs are subject to specification requirements.

All in all, it is recommended to find a professional fire construction unit for review. After all, others still have a relationship.

Most of them are made by people who fight firefighting. Some of them just make their own pictures. And then take it to the fire brigade for review, like this...

Construction according to the drawings, and written procedures must be completed for changes. The red envelope is ready at the time of acceptance.

This refers to the decoration design of the interior decoration design unit should be submitted to the fire department for review, and the building fire protection and installation fire protection of the entire project are drawn by the design institute, and the design unit of the interior decoration society qualification of the decoration is issued.

After the fire protection, you can find a fire design company to come up with a fire protection design blueprint, and then stamp and report for approval