Why can t Samsung mobile phones U608 send MMS messages?

It may be that the parameters in your phone are set incorrectly, you take your phone to the Samsung service center and ask the people inside to help you set the parameters.

Hello, the settings are as follows, I hope it can help you set up the access point: Settings - Connection Settings - Access Point. The licensed goods should have preset three access points, mobile Monternet GPRS, China Mobile MMS, and GPRS to connect to the Internet.

The configurations of these three access points are as follows: (a) Monternet GPRS: data bearer mode GPRS, access point name CMWAP, username none, prompt password No, password none, authentication normal, homepage.

Mobile IP address automatic, primary name server, secondary name server, **server, **port 80 (China Mobile MMS: data bearer mode GPRS, access point name CMWAP, username none, prompt to enter password No, password none, authentication normal, homepage.

Mobile phone IP address automatic, primary name server, secondary name server, **server,**port 80 0 8GPRS connection to the Internet: data bearer mode GPRS, access point name cmnet, username none, prompt password no, password none, authentication ordinary, homepage none, mobile phone IP address automatic, primary nameserver, secondary nameserver, **server none, **port 0 3Once the access point is configured, you can use MMS, Monternet, and email (a) MMS settings:

Info - Options - Settings - MMS The access point used by China Mobile MMS, MMS reception is always on and is extracted immediately when the message is received Monternet settings are as follows:1, Function Menu Settings Connection Settings Access points, by option Add an access point Use the default settings 2. Connection name (customizable) Data Bearer Mode (GPRS) Access Point Name (CMWAP) Username (None) Prompted for password (no) Authentication (Normal) Home (http: 3, options Advanced Settings Mobile IP (Automatic) Primary Nameserver (not selected) Secondary Nameserver (not selected) Proxy server address (**Port (80) 4, Return to Connection Settings GPRS GPRS Access (when required) Access Point (CMWAP) 5, Network Options Settings Default Access Point (set to the connection name mentioned in step 2) If not, you cannot send MMS Please set it as follows:

1. Function Menu Settings Connection Settings Access Point, Press Option Add Access Point Use Default Settings 2, Connection Name (Customizable) Data Bearer Mode (GPRS) Access Point Name (CMWAP) Username (None) Prompt for Password (No) Authentication (Normal) Home Page Options Advanced Settings Mobile IP (Automatic) Primary Nameserver (Not Selected) Secondary Nameserver (Not Selected) Proxy Server Address (**Port (80) 4. Enter the Information option Settings MMS The access point used (set to the connection name mentioned in step 2).

Hello: Based on the situation you described, it is recommended that you:

1.Check whether the mobile phone has enabled the Internet service, and contact the network operator for the specific situation;

2.If this service is enabled for differential mode, we recommend that you pull down the top curtain of the screen to check whether you can receive MMS.

3.If it cannot be received, it is recommended that you shut down and restart the computer to see if it returns to normal.

4.If the problem persists, it is recommended that you change to another SIM card to check whether it is restored.

5.If it still can't be solved, it is recommended that you back up your phone data (**book, short message, multi** files, etc.), and restore the factory settings of Hengqing limb settings (Settings-Reset-Factory Reset);

I hope it can help you and I wish you a happy life!