How to clean couplet dispensing glue 5

In fact, there are only two correct ways to post it, the first one, more than 90% of people will, is double-sided tape.

Second, more than 90% of people don't. It's glue or paste.

There are two types of double-sided tape suitable for pasting. One is that the couplet itself is not paper, or it is laminated with plastic film. One is the wall that does not bond well with glue and paste.

Glue or paste, suitable for paper couplets, and the wall and glue or paste can be well bonded. But how to stick is a high-tech problem. More than 90% of people don't.

First, moisten the couplet with water and allow it to extend before sticking. Without this step, a water crepe pattern will appear. Because most people don't know this, most of them are crepe after pasting.

Second, glue or paste, not full brush, let alone any cross, multi-point brush and the like. It should be enough to brush 3-5 cm around the couplet.

Third, after brushing all around, paste it, and then cover it with a layer of newspaper. Wait for it to dry in the shade, and the slower the drying, the better.

When you open the newspaper the next day, you will find that the couplet you pasted is as smooth as a glass mirror, without a trace of crepe.

That's what framing actually does.

Double-sided tape can be used, which is convenient and practical. The transparent tape stickers are ugly. The paste can also be considered, it's just that the glue you said comes off easily.

Soak it in water and tear it off with a knife.

Nail polish remover: Drop some nail polish remover in the place where there is offset printing, soak it for a while, and then wipe it with a paper towel to remove it to ensure that the surface of the item is as smooth as new. Hair dryer:

Turn on the hair dryer to the maximum heat and blow on the offset printing to make the offset printing soft, and wipe it off with an eraser or a soft rag. Remove with adhesive remover: also known as "self-adhesive remover", spray the trace part to remove the offset print.

Nail polish remover: Drop some nail polish remover in the place where there is offset printing, soak it for a while, and then wipe it with a paper towel to remove it to ensure that the surface of the item is as smooth as new.

Hair dryer: Turn on the hair dryer to the maximum heat and blow on the offset printing to make the offset printing soft, and wipe it off with an eraser or a soft rag.

Remove with adhesive remover: also known as "self-adhesive remover", spray the trace part to remove the offset print.

Soak the offset with medical alcohol: drop some medical alcohol on the surface of the trace, soak it for a while, and then wipe it off with a soft cloth or paper towel. Note: Like nail polish remover, items need to be less susceptible to corrosion.

Computer cleaner to erase offset marks: The cleaner that is usually used to wipe camera lenses and computer screens can also be used to erase tape marks, which is very effective for tape marks on smooth surfaces.

Use an eraser to wipe a little bit along the edge of a mausoleum to easily remove marks. But depending on how sticky you are, it can be too old for a different time. If there is a condition, the alcohol + eraser effect is very good.

To determine which glue to use depending on the situation, the following states and towns are several situations:

Relatively rough walls, but the kind that can't be dusted, use double-sided tape.

The wall is relatively smooth and impermeable, and transparent glue is used for the kind of glue that can be wiped off with water.

The wall is very rough, and the kind that will fall off the dust when touched is glued.

In addition to the fact that you can use double-sided tape, clear glue and glue, there is also a homemade glue.

Step 1: First of all, mix the appropriate amount of starch and a bowl of water, mix the water and starch together, and then use chopsticks to stir them evenly, the ratio of starch and water is about 1:3, and then prepare a pot ** to heat.

Step 2: Then pour the stirred starch solution into the pot and stir it with a spatula on low heat, stirring until the color of the solution turns from white to transparent viscous.

Step 3: Finally, we can put the homemade starch solution out, the glue made by this soil method is sticky couplet, the glue is very firm, and it is also very easy to clean, only need to wet it with a towel and gently wipe it off, and the sticky firm does not leave traces.

You can use ordinary 502 glue to paste the couplet, but the glue will not stick firmly, it is recommended to use paste, it is convenient and easy to uncover the couplet with paste, and it will not stain the door. The calendar point of the excellent service book is sticky, does not affect the beauty of the bottom, and is suitable for uneven walls; The disadvantage is that it requires tools and materials to make it. <

You can use ordinary Zimin 502 glue to paste the couplet, but the glue will not stick firmly, it is recommended to use paste, and it is convenient and easy to uncover the couplet with paste, and it will not stain the door. The advantage is that it has strong viscosity, does not affect the beauty of the bottom of the old search, and is suitable for uneven walls; The disadvantage is that it requires tools and materials to make it.

Before pasting the Spring Festival couplets, the new peach replaced the old charm, and after tearing off the old couplet, it was found that there was a thick layer of paste on the wall and door frame.

Printing or gluing watermarks. There are also old couplets that are very strong to paste, and it is very difficult to tear them off, how to quickly remove these sticker prints, paste prints and offset prints.

This? Wash the paste marks on the door before pasting the Spring Festival couplets! This quickly removes paste and offset printing.

If it is a mark left by pasting something with something such as rice soup, the easiest way is to scrape it off with a razor blade first, and then wipe it vigorously with a damp rag dipped in hot water.

Wash the paste marks on the door before pasting the Spring Festival couplets! This quickly removes paste and offset printing.

If you encounter a particularly stubborn paste mark, apply a little white vinegar to it, wait for 30 seconds, and then wipe it dry with a rag, which is very useful because there is acetic acid in the vinegar.

will be paste. Corrosion is carried out.

You can use white gauze or a cloth that can hold salt, wrap a small packet of salt, rub gently, and slowly you will find that the glue left on the wallpaper is slowly disappearing, and in turn sticking to the fabric, you just need to stop while rubbing to remove the clumps of glue on the gauze.

Wash the paste marks on the door before pasting the Spring Festival couplets! This quickly removes paste and offset printing.

2. Regardless of offset printing"History"How old it is, how big the area is, drop some nail polish remover used by girls to clean nail polish, soak it for a while, and then wipe it with a paper towel to ensure that the surface of the item is as clean as new. However, due to the strong corrosiveness of nail polish remover, it cannot be used on the surface of items that are afraid of corrosion, such as lacquered furniture and laptops.

enclosures, etc. To remove the traces of tape on the screens of computers, mobile phones, TVs, etc., be sure to choose a safe and neutral glass of water.

Protects items from corrosion.

Wash the paste marks on the door before pasting the Spring Festival couplets! This quickly removes paste and offset printing.

3. Medical alcohol.

Soak the offset printing, drop some medical alcohol on the surface of the trace, soak it for a while, and then wipe it off with a soft cloth or paper towel. Of course, items with traces of tape must not be subject to alcohol corrosion. Similarly, if you have expired perfumes or astringent lotions, they can also be used as a substitute for alcohol, because there is a certain amount of alcohol in them, and these two can be applied to any item, after all, there is not much alcohol in it.

4. Wind oil essence.

You can also try.

Wash the paste marks on the door before pasting the Spring Festival couplets! This quickly removes paste and offset printing.

5. If it is a wall of paint or coating, and the offset printing is too stubborn, you can try it with paint stripper.

Wash the paste marks on the door before pasting the Spring Festival couplets! This quickly removes paste and offset printing.

Nail polish remover, hair dryer, gum remover, eraser, alcohol, etc. can be used.

Nail polish remover: Drop some nail polish remover in the place where there is offset printing, soak it for a while, and then wipe it with a paper towel to remove it to ensure that the surface of the item is as smooth as new. Hair dryer: Turn on the hair dryer to the maximum heat and blow on the offset printing to make the offset printing soft, and wipe it off with an eraser or a soft rag. Remove with adhesive remover: also known as "self-adhesive remover", spray the trace part to remove the offset print. Eraser, rub it in little by little along the edge, easy to remove marks. But depending on how sticky you are, it may take a different time. If there are conditions, the alcohol eraser works very well.

This depends on what kind of glue, paste, glue can be soaked in hot water to wash. Self-adhesive ones can be scrubbed with alcohol.