What should I do if I leave the socket behind the integrated stove for decoration?

Look at the size of the void, and if enough you can buy a strip from the integrated stove.

The back lead is fixed on the wall, although it is ugly, but it is worth compromising for convenience, pay attention to high temperature, it is best to leave a little gap around the wire or set a soft sleeve to ensure safety.

Then you probably won't be able to use this socket. And this one is also very inconvenient, it is better to close it on. I think it's still safe. Or take it apart and start over!

You can move the socket out between the integrated stoves, or you can move the sockets to the blank space inside the integrated stove to facilitate the power supply.

Extend the cable to the side and install the socket.

Clean up and press the socket on the back of the integrated stove, which is very unsafe, there is a special kind of socket eye blockage, according to the kind of power supply blocked.

What should I do if I leave the socket behind the integrated stove for decoration? I think it is very troublesome to leave the socket behind the signs and signs in the decoration, because it is very difficult to use.

Netizens can't see it, don't understand the situation, and it's hard to be accurate. It is best to find a professional master to take a look at the scene, and if there is a safety hazard, take appropriate remedial measures!

The decoration left the socket behind the integrated stove, what should I do? You can directly change the socket of the integrated stove again, or add a plug-in board and wiring board.

The plug of the integrated stove is usually placed on the cabinet next to it. The electrical outlet should be grounded. Sockets and gas connections are not allowed to be installed in cabinets in the same direction.

For models that use a combination of induction cooker and gas cooker, the power cord must be above and the power supply must be above 3mm to ensure that the power cord does not heat up under load.

The gas connector is equipped with a gasket (black oil-resistant rubber), and the gasket must be inserted into the step at the gas connection of the whole machine first. If the gasket enters the interface, it is not completely on the step of the interface, which will cause leakage. Owners who use cylinder liquefaction must use fixed pressure reducing valves, and adjustable pressure reducing valves are not allowed.

When installing the whole machine, it is necessary to pay attention to the cooperation with the cabinet, to ensure that the whole machine must be able to move after installation, not restricted by the cabinet, and pay special attention not to buckle the cabinet counter panel on the upper edge of the side panel of the whole machine. The whole machine should be kept in a forward-tilted state, and the front must be three millimeters higher than the back, which is conducive to the drainage of the water tray of the stove cavity.

It can't be placed in the back, it should be placed on the left and right.

The integrated stove is now one of the most popular kitchenware in the kitchen, Shengxiangzhou it is very suitable for modern family use, not only beautiful and generous, but also very convenient and fast to use. But the banquet is that when buying an integrated stove, many people ignore its plug position, if the plug is in the back, it will affect the use very much. So, what if you buy an integrated stove plug in the back?

The first method: move the outlet location.

If your kitchen is in the construction or renovation stage, you can consider moving the position of the socket so that you can better install the integrated stove. However, if your kitchen is already finished, then mobile outlets are not realistic because it will add a lot of renovation costs.

The second method: use an extension cord.

If you don't want to move the socket location, then you can consider using an extension cord. You can install the integrated cooktop, then connect the extension cord to the cooktop plug and then connect the extension cord to the socket. However, this method is prone to hidden dangers, because too long wires will affect the safety of electrical use, and it is easy to be kicked and beaten, causing potential safety hazards.

The third method: use a converter.

Another option is to use a converter to connect the power supply from the back to the plug behind the cooktop, so that you can avoid the use of extension cords. However, this method requires the purchase of a converter with a dedicated door, which increases the cost and requires a high level of electrical skill for installation.

To sum up, when buying an integrated stove, you must pay attention to the position of the plug, and it is best to choose a product with the plug in the lower part of the stove, so as to avoid the problem of the plug in the back. If the plug is in the back, we can use an extension cord or converter to solve the problem, but it is not recommended to use this method, because it will be more unsafe, you can carefully consider this problem before installation, and choose a more suitable location of the stove.

Summary. Qinqin is happy to answer for you, there can be no socket behind the integrated stove for the following reasons: the thickness of the socket plus the plug will make the integrated stove protrude out of the door panel, affecting the installation effect.

No other sockets can be set up on the wall behind the integrated cooker, because the glass cover of the integrated cooker will cover the socket behind it after lifting, resulting in the unusable socket. <>

<> why can't there be a socket behind the integrated stove?

Qinqin is happy to answer for you, the reason why there can not be a socket behind the integrated stove is as follows: the thickness of the socket plus the plug will make the integrated stove protrude out of the door panel, affecting the installation effect. Other sockets cannot be set up on the wall branch behind the integrated stove, because the glass cover of the integrated stove will cover the socket behind it after lifting, resulting in the socket being unusable.

<> the expansion that you will be given to you is: precautions for the use of integrated stoves 1Do not use gas other than the nameplate to avoid danger.

2.Use clean metal hoses or hoses for gas, and do not use hoses or vinyl hoses with wide defects. 3.

The metal hose should not be too long, and it should be twisted with caution. <>

<> a little bit I don't understand, the left side of the integrated stove is the flue, there is a cabinet, the right side of the draft is the gas branch, there is a cabinet beam search, is it placed in the left flue key slag cabinet or put on the right and the gas branch pipe to share a cabinet.

Kiss, put it on the left.

It can be placed on the right side no, and it can be placed on the right side to have an effect.

Kiss, you can't share a cabinet, it's not safe.

Summary. Hello, I have already helped you find out: the reason why there can be no socket behind the integrated stove is for safety reasons.

If there is an outlet in the back, the wires in the socket may melt due to the high temperature, resulting in a short circuit and fire and other hazards. In addition, the socket will also affect the installation and use of the integrated cooker, because the socket will occupy the installation space of the integrated cooker, so that the integrated cooker can not be completely embedded in the wall or cabinet, affecting the aesthetics and use effect. Therefore, there should be no socket behind the integrated stove to ensure safety and aesthetics.

Hello, I have already helped you find out: the reason why there can be no socket behind the integrated stove is for safety reasons. If there is an outlet in the back, the wires in the socket may melt due to the high temperature, resulting in a short circuit and fire and other hazards.

In addition, the socket will also affect the installation and use of the integrated cooker, because the socket will occupy the installation space of the integrated cooker, so that the integrated cooker can not be completely embedded in the wall or cabinet, and the wheel blocking will affect the appearance and use effect. Therefore, no socket should be set up behind the integrated stove to ensure the safety and aesthetics of use. Hope mine can help you.

Stop pins. The left side of the stove is the flue, there is a cabinet, the right is the gas branch, there is a cabinet, whether to put it in the flue cabinet on the left or put it on the right side and the gas branch pipe share a cabinet Lu Mengbu.

Hello, for the sake of the safety of Palalu, the flue cabinet and the gas dust belt branch cabinet are separated and placed separately. In this way, cross-interference between the flue and gas pipelines can be avoided, thus ensuring the safety of use.

As a kitchen cooking tool in the new era, integrated stoves are becoming more and more popular. But at the same time, the problem of integrated stove sockets is also widespread. Here are some solutions to the problem of integrated stove sockets.

1. Socket short circuit.

After the use of the integrated stove, sometimes there will be a short circuit in the socket, which is often caused by loose wires. First of all, you need to turn off the integrated stove switch and disconnect the power supply; Secondly, disassemble the panel, check whether the sockets and wiring are normal, and pay special attention to whether the wiring is firm.

Second, the plug is overheated.

Sometimes the plug is overheated, especially after the plug is inserted into the socket, some plugs will feel loose, in this case, the plug will be overheated for a long time. First of all, you need to replace the appropriate plug, especially pay attention to whether the plug is installed correctly; Secondly, you can try to reduce the power of the integrated stove so that it does not overheat during use.

3. The plug is loose.

Sometimes the plug is loose, and this problem needs to be solved in time, otherwise it will affect the normal use of the integrated stove. First of all, you need to turn off the blind grip switch of the integrated stove and disconnect the power supply; Secondly, check whether the plug and socket match, and if not, choose a more suitable plug.

Fourth, the socket is damaged.

The socket is sometimes damaged due to loose parts, mismatched plugs, frequent plugging and unplugging, etc., which needs to be repaired in time. First of all, you need to turn off the switch of the integrated stove and disconnect the power supply; Secondly, check the damage to the socket, if the damage is slight, you can replace the socket by yourself; If the damage is severe, it needs to be repaired by an electrician.

To sum up, although the problem of integrated stove socket is widespread, as long as you master a certain coping method, you can solve the problem in time and ensure the normal use of the integrated stove. At the same time, in order to avoid the problem of integrated stove socket, attention should be paid to quality and safety when using, regular maintenance and inspection, and timely treatment of problems.