What should I do if my refrigerator drain is blocked by ice? How to properly unclog?

The refrigerator drain is clogged with accumulated ice usually because the temperature inside the refrigerator is too low, the refrigerator drain is clogged with frost, obstructing drainage, or the inside of the refrigerator is not cleaned up in time Food or vegetable scraps enter the drain pipe and block the pipe. When cleaning, you can find a pump that is closest to the size of a refrigerator drain to fill the bicycle with air. When using this type of air pump, the first thing to do is to remove the upper fitting and expose the trachea.

Insert the air pipe of the gas tank into the drain of the refrigerator, then blow hard, penetrate the refrigerator drain pipe, inject a small amount of water into the refrigerator drain, use the air tank to rinse repeatedly, and finally throw away the water from the refrigerator water supply plate, and set the refrigerator baffle.

After the food residue enters the refrigerator, the refrigerator drain is blocked, so cut off the power of the refrigerator before cleaning. Then, remove the long plastic plug in the refrigerator drain and insert the long rod into the refrigerator drain of the refrigerator to communicate. After the above steps are completed, get a cup of water and pour it into the drain of the refrigerator, if the water easily enters the drain of the refrigerator, the drain of the refrigerator is opened.

Refrigerator drain in**? The condensate drain in the refrigerator compartment is located in the following areas behind the inside of the refrigerator compartment. The stuff in the fridge has to be taken out, the frame has to be taken out, and possibly the plastic baffle, you can go and see it.

The dirty is the dirty blockage that falls into the dirty, mainly vegetable leaves, plastic bags, etc., crashing into the drain, resulting in the condensate being unable to be discharged.

After the ice was clogged, the sewer pipe descended through the freezer, and the cold air from the freezer was transported to the sewer, resulting in a problem with the product design in the case of the Upper East Side. Another situation of ice blockage is that the temperature of the refrigerator freezer compartment is set too low, and when the refrigerator stops normally, if the melted water cannot be discharged in time, it will freeze. Normal melting water can be excluded.

The blockage clogs the ice and also clogs the water pipes underneath.

Store food without cooling and put it directly in the refrigerator. At this time, the food is still hot because the hot air has a high moisture content, so it is cooled in the refrigerator. This cooling process produces a lot of condensation.

If the condensate is not drained in time, water will accumulate in the refrigerator. If the ice is blocked, first turn off the power, clean the refrigerator, then turn off the power for more than 1 hour, melt the ice, and then observe whether the drainage is normal after the ice melts. You can use a cup to pour a small amount of water into the drain and check that the refrigerator drain drain is draining smoothly.

If it is not smooth, the drain will be clogged, you can refer to the dirty blockage procedure to solve the dirty blockage problem.

Clean the drainage hole in the refrigerator refrigerator in time, the drainage pipe of the refrigerator drainage hole has a certain bend, and the debris in the drainage pipe can not be removed when cleaning, you can open the back cover of the refrigerator, take out the drainage pipe of the refrigerator, remove the debris in the drainage pipe, and flush it several times with tap water.

If the refrigerator drain is blocked by ice, the refrigerator can be powered off. The ice in the drain outlet is turned into water and flows out directly due to the increase in temperature, so that the refrigerator can not be damaged by physically mashing the ice.

The drain of the refrigerator is blocked by ice, so it must be dredged, first of all, the refrigerator should be turned off first, you can get a little warm water to melt the ice slowly, and then use a dry towel to absorb the water.

There can be two reasons for a clogged fridge drain: Clogging of food debris As the refrigerator stores food for a long time, food debris and dirt inevitably remain on the walls of the refrigerator. These dirty things flow down the condensate to the drain holes, where they accumulate in the drain holes and inner holes, causing poor drainage.

If it is not cleaned for a long time, it will cause clogging. The inside of the drain hole is clogged. Some refrigerators have clean drain holes, but condensate does not run down once it reaches the drain holes, which is also a sign that the drain holes are blocked.

Most of the reasons are due to the blockage of the pipes in the drainage holes, which can be divided into ice plugging and dirty blocking. Ice blockage refers to the drainage pipe being clogged with ice, and dirty blockage is when it is clogged with dirt and food debris. The refrigerator should be kept away from heat sources:

For every 5% increase in the temperature around the refrigerator, its internal power consumption increases by 25%. So keep it as far away from the heat source as possible, preferably in a ventilated and shaded place. Don't put hot food directly in the refrigerator and wait until it reaches room temperature before putting it in.

The food in the refrigerator is best packaged in plastic bags, which can be quickly frozen, not easy to dry, and will not have moisture and frost.

The food should not be overfilled, and there should be a gap between the food and the wall of the refrigerator to facilitate the flow of cold air; For frozen foods, it is best to transfer them to the freezer in a planned way to thaw them before eating. The water in the refrigerator water tray can be installed on the refrigerator. When food debris enters the refrigerator and the refrigerator drain hole is blocked, it is necessary to cut off the refrigerator power when cleaning.

Remove the long plastic plug from the refrigerator drain and insert it into the freezer hole of the refrigerator. Put a glass of water in the drain of the refrigerator. If water easily gets into the drain of the refrigerator, it means that the drain hole of the refrigerator has been removed.

How to prevent drainage holes in the refrigeratorUsually, when we use the refrigerator, we must pay attention to the use of the refrigerator and check the instruction manual of the refrigerator.

If this method is not correct, the refrigerator can easily break down and even affect its lifespan. The problem of clogged drains is actually preventive. Let's talk about how to prevent it.

You can't put food, and you can't put food on the inside wall of the refrigerator. There will be too much food in the fridge, which will not only increase the burden on the fridge. It is not conducive to the circulation of cold air in the refrigerator.

It is easy to cause food debris. Entering the refrigerator drain hole, resulting in the refrigerator drain hole. The temperature can not be set too low, the refrigerator temperature is too low, and then the water vapor in the refrigerator condenses on the inner wall of the refrigerator to form an ice layer, and the ice layer enters the drainage process of the refrigerator during the melting process and cannot be melted in time.

It can cause the refrigerator drain hole to become clogged. The refrigerator drain hole is blocked, causing the refrigerator to flow out of the refrigerator in time, causing the refrigerator to leak.

When placing food, cool the food before putting it in the refrigerator, so that the steam generated by the food will not form condensation when it is cooled in the refrigerator. When there is water in the refrigerator, clean up the water in the refrigerator that cannot be drained through the drain in time.

When there is water in the refrigerator of the box, it is necessary to cut off the power supply of the refrigerator and use a thin iron wire to dredge the leakage of the military line.

Reduce the number of refrigerator door openings, and at the same time dredge the drains and leaks in the refrigerator compartment to ensure that the refrigerator can discharge condensate in time.

You can choose an air-cooled refrigerator instead of a straight one, or you can put a water-absorbing container in the refrigerator to prevent the moisture from freezing.

You can unplug the power of the refrigerator and use a small wire to pass through the drain hole, so that it can be used normally.

Summary. Find a discarded network cable or a thicker wire, remove the cable, and keep only the outer skin.

2.After the refrigerator is powered off, insert the hose into the drain hole, rotate it to dredge it, and then blow on the other end of the hose to help unclog it.

3.Finally, wipe the inside of the refrigerator clean.

How to solve the ice blockage of the refrigerator drain?

Find a discarded network cable or a thicker wire, remove the cable, and keep only the outer skin of the brother. 2.After the refrigerator is powered off, insert the hose into the drain hole, rotate it to dredge it, and then blow on the other end of the hose to help unclog it.

3.Finally, wipe the inside of the ice sock box.

Just a few days after it was opened, the ice was blocked again.

You can call a master to come and have a look.

The above is that the master came to the door because of the ice blockage for a few days, and the ice was blocked and leaked again as before.

The refrigerator will be like this for a long time, and I can't help it, I'm embarrassed.

Refrigerator drain plugging and dredging methods: 1. Power off method, 2. Pump method, 3. Iron wire method.

1. Power-off method.

The easiest way to unclog the drain hole in your refrigerator is to melt the ice in the drain opening. The specific method is to disconnect the power supply of the refrigerator, empty the items placed in the refrigerator room, open the door of the cold storage room, and let it stand for a period of time. When the temperature inside the refrigerator rises, the ice in the drain will naturally melt, thus achieving the effect of dredging.

2. Pump method.

If it is not the ice that has blocked the drain hole of the refrigerator, but some food or vegetable residue that has not been cleaned in time has entered the drain pipe. Then you can find a pump for the bicycle to pump up, the diameter of the air tube of this pump can be close to the size of the refrigerator drain hole, just pump gas into the refrigerator drain hole.

3. Iron wire method.

Wrap the tip of the dredging tool with medical sticks, electrical tape and the like, so as not to stab the drain pipe during the dredging process. Then poke the wire through the drain hole. Poke until you feel like you're touching plastic or metal, then take it out.

Possible consequences of clogged drain holes in the refrigerator:

1. Overflow. In general, the refrigerator drainage hole may be because when the food is refrigerated, the food residue enters the refrigerator drainage hole, resulting in the blockage of the refrigerator drainage, so that the water in the refrigerator can not be discharged smoothly, and the phenomenon of overflow will occur inside, affecting the normal use, and there will be different degrees of water accumulation on the ground.

2. Affect the freshness of food.

When the drain hole of the refrigerator is blocked, then the inside of the refrigerator cannot drain smoothly, so the gas inside cannot be exchanged normally, the whole refrigerator is in an abnormal working state, and the freshness of the food cannot be guaranteed. The consequence of the blockage of the refrigerator drain hole is that the refrigerator loses its original function, and the freshness of the food is greatly reduced.

1. Ordinary dirty blockage treatment method: a. If the lower part of the drainage pipe is blocked, it will not be very deep, just poke it with a screwdriver or the like; b. If the drainage pipe joint is blocked, the wire of appropriate hardness can be tilted into a certain arc and poked down into the drainage port (the depth should not exceed 50mm). Be careful not to scratch the refrigerated container and drain nozzle until it is cleaned and drained smoothly.

A 4-capillary tube is welded to the pipe at the exhaust end of the compressor to form a tee with the system pipe. The other end of the capillary is sealed by welding, and the capillary is then inserted into the refrigerator drain to reach the ice cube. The length of the capillary depends on the length of the refrigerator drain.

Take a copper pipe with a diameter of 6mm, about 80cm long (from the drainage hole of the actual refrigerator to the outlet), seal one end with a welding torch, vacuum the other end with a pressure gauge, fill it with R12 refrigerant (refrigerant with negative temperature coefficient can be) about 8g, then seal it, and then put the copper pipe at the outlet near the compressor into the drainage hole (using the principle of refrigerant heat and cold conduction, the cold energy is dispersed in the place that is easy to ice blockage).

If the lower part of the refrigerator drain pipe is blocked, the place will not be very deep, and it can be pierced directly with a screwdriver, if it is blocked at the drain pipe joint, you can use the iron wire of appropriate hardness to be crooked into a certain arc, and poke it down along the drain nozzle (the depth should not exceed 50mm), be careful not to scratch the refrigeration tank and drain nozzle.

A refrigerator is a kind of refrigeration equipment that maintains a constant low temperature, and it is also a civilian product that keeps food or other items in a constant low temperature state. Inside the box there is a compressor, a cabinet or box for ice making for icing, and a storage box with a refrigeration unit. The volume of a household refrigerator is usually 20 500 liters.

1. By using a thin iron wire, the hole should be cleaned and cleaned accordingly, and the corresponding working hose can also be connected for effective dredging of the pipeline. 2. In the process of pipeline dredging, add dish soap and alcohol to hot water to speed up the corresponding pipeline cleaning and dredging efficiency, which can also achieve a good sterilization and removal effect and effectively prevent the breeding of bacteria inside the pipeline.

1. Turn off the power switch of the refrigerator, and use fine wire to clean the corresponding pipes for the drainage holes and ventilation holes of the refrigerator. At the same time, it is also necessary to dredge the drainage pipes to prevent the corresponding dirt blockage and affect the drainage effect inside the refrigerator.

2. In the process of dredging the drainage pipe, by adding the corresponding dish soap and alcohol to the hot water, the hose is directly connected to the drainage hole of the refrigerator, and the hose should be pushed into it vigorously, and one end of the hose appears from the bottom of the drainage hole, which means that the dredging of the pipeline has been completed. In the process of dredging, it is also necessary to properly carry out some erasing and sterilization work to ensure good sanitary working conditions of the pipeline content, avoid the breeding of some microorganisms, especially to reduce the corrosion inside the pipeline, and achieve a good pipeline use work.

The refrigerator drain hole is blocked by ice, and the workaround is as follows:

Thaw, then dredge. In other words, if the ice in the drain hole is so strong that we can't get the ice out, then the only way to do it is to let the ice melt away. Then the method we need to take at this time is to disconnect the power of the refrigerator, then clean up all the items in the refrigerator, and then open the refrigerator door.

After a while, the ice in the refrigerator will melt, and the drain of the refrigerator will be dredged naturally.

If the ice still accumulates water after it melts, then Qingmo means that the drain pipe is blocked, and the drain pipe needs to be dredged. In fact, the easiest way is to use a trachea to insert into this drain pipe and pump air into it. In this way, the gas is used to dredge it.

Because we are pumping the gas, the gas is under pressure, so that the drain pipe of the refrigerator can be penetrated, and then the reputation chain will dredge the drain pipe completely. At this point, you will notice that the stagnant water in the refrigerator has gone down the drain pipe.

How to maintain your refrigerator

1. It cannot be cleaned with water, and the seal should be carefully cleaned.

To clean the refrigerator, take out everything and put a basin of hot water in the freezer, so that the heat can melt all the ice in the refrigerator for Kyungson. The water cooling should be replaced in time, and most of the frost in the refrigerator has melted away, so you can use plastic sheets to clean them.

2. Clean the back.

The smooth operation of the refrigerator depends on the heat dissipation behind it, and it is necessary to use a vacuum cleaner to clean the condenser behind it from time to time to prevent dust from sticking to it and affecting heat dissipation. The water used to defrost the refrigerator will not evaporate, and it must be disposed of in time, otherwise there will be a foul smell.