How to determine if the water pipe is clogged?

For example, the household water in my hometown is brought back from the mountains by myself.

The water quality is clear and sweet, it is particularly easy to make the water pipe grow moss, and we are using stainless steel water towers to store water on the roof to increase water pressure, in the sedimentation process after the wind and sun or after a long time without water, moss will appear Personal simple dredging: disassemble a faucet filter, with all the water pressure gushing out of this faucet, piggybacking out some precipitated impurities. After cleaning the strainer, reinstall the nozzle and repeat the next faucet.

<> be sure to install a Y-shaped filter on the main water pipe at home. In this way, you can regularly clean up the mud and fine sand and other impurities in the water on the filter element inside, don't be afraid of spending money and trouble, and you can also open the faucet farthest from the main valve in the main entrance pipe, and choose to drain the pulse function to play citric acid.

Water. After emptying, put the suction tube into the clean water bucket, first open the faucet closest to the pulse pipe inlet, select the pumping pulse function, and turn on the next faucet after the discharged water is clear and transparent. <>

It's pretty simple, just connect the device to the faucet. Turn on the automatic flushing, the whole process is about 90 minutes, be careful not to wash the pipe. In addition, due to the aging and rust of pipelines, the breeding of miscellaneous bacteria in the pipes, and the leakage of the pipe network, harmful bacteria, dirt, heavy metal ions, etc. will accumulate in the pipeline, and the water body will enter the user's home, endangering human health, causing liver and kidney damage, tumors, and cancer.

and other diseases. <>

Since most of the faucets are made of metal, and natural water will carry a lot of sediment and other particles through the pipes, it is easy to cause rust inside the faucet or clogged filter at the outlet. Of course, the clogged filter of the faucet is only one reason for the water flow to become smaller, and it is also possible that the valve is not fully opened, because after using it for too long, some water valves will age, which may also lead to a smaller water flow in the main water pipe, if this happens, it is recommended to replace the water valve.

You can keep the faucet open to put water to see if the water will overflow, if it overflows, it means that the water pipe is blocked.

You can observe the speed of the water pipe, if the speed of the water flow is particularly slow, and the liquid of the water flow is particularly small, it means that the water pipe is blocked, and the water pipe needs to be dredged at this time.

You can get the water pipe out, and then see if the water is passed, if the water is passed, then there is no blockage, if there is no water, it may be blocked, and you can also see the smoothness of the water.

If there is very little water coming out, or if the water does not flow out when adding water to it, it means that the water pipe is blocked and must be dredged.

You use a metal pipe, and in the dead of night, you can hear the sound of the water by sticking one end of the pipe to the ground and the other end to your ear. There is a water pipe underneath the strongest place, and if it is very loud, it will be a leak. Another way is not to use metal tubes, and to keep your ears close to the ground in the dead of night.

Water pipes can also be found by following the steps above. These two methods are often used by water company crews to check for ruptures in water pipes in city roads.

Water pipes that have been used for years are difficult to clean and replace because they are wall-mounted. In addition, due to the problems of small pipe diameter, many bends, and slow water flow, water pipes are prone to rust, blockage, turbidity, and excessive bacteria under the action of organic matter and humus in the water. In addition, there are many toxic metals such as algae poison, arsenic, cadmium, mercury, lead and other toxic metals in the pipe wall, causing secondary pollution of water.

Since every point is absorbed by the human body, it accumulates over time, seriously affecting people's health and the safety of drinking water. In order to prevent problems before they happen, how can you tell that there is a problem with your water pipes from the details? It is possible to find the problems in the long-term use of domestic water pipes earlier and in a more timely manner, so as to replace the 304 stainless steel pipes of healthy materials as soon as possible.

Tap water is delivered to every house, and the whole process is kept clear and transparent. The color of tap water is colorless and transparent. If your tap water appears rainbow-like, especially if you've never seen it before, there's a good chance there's something wrong with your water pipes.

The tap water treated by the waterworks has some slight disinfection odor after disinfection, but it will not cause harm to human health. But if your tap water has a distinct and strong odor, such as a fishy smell, the source of the problem is mostly in the water supply pipe. The normal tap water we usually drink is relatively soft and has no impurities, but once we drink tap water, there will be an obvious feeling of foreign bodies, such as many impurities and turbid water.

Of course, once the above three situations occur, the health of users who use water for a long time will be harmed sooner or later, especially if they use the above three types of water for a long time, their health will be different in the future. So, how to put an end to the above three situations? For the sake of drinking water health for you and your family, it is recommended that the home improvement water pipe should be made of good material, safe and high standard 304 stainless steel water supply pipe.

The 304 stainless steel water pipe can operate safely in a high-speed environment of 25m s, and will not produce harmful substances due to high-pressure and high-intensity water flow; Under the harsh temperature difference of -40 to 110, it can ensure safe and long-term work, will not precipitate toxic substances with temperature changes, will not produce special odors, and has extremely stable performance, enjoying healthy hot and cold water.

Add water to the water pipe first to see if it can flow out, if the water does not flow out, it will be blocked. If the water pipe is straight, use a rope to hang a hard object to test the depth of the blockage, if it is a curve, then it is better to ask an experienced person to help you, in case you accidentally break the water pipe.

In fact, it is very simple to judge whether it is blocked, when it is unobstructed, the water flow is smooth, as long as the water flow is a little smaller, it means that the water pipe is not smooth, and it needs to be opened.

If you want to tell if the water pipe is clogged, just turn on the faucet and see if the water flow has decreased.

After the water pipe is blocked, it can be dredged by water pressure, chemical dredging method, tool dredging method, etc. Take the water pressure dredging method as an example, open the end of the pipe, increase the water pressure with a pressurized pump, and use the pressure to dredge it. Fill the pool with clean water, pour in an appropriate amount of white vinegar and stir, fully dilute, open the valve of the tap water, if it is still a little blocked, find a chopstick, take the facial tissue at home, take enough facial tissue paper to knead into a paper ball, place it in the water pipe, use chopsticks to reach into the water pipe, and wipe the inner wall of the water pipe with facial tissue.

Precautions for cleaning water pipes:

1. Close the main valve of the household water pipe, close the valve of wading electrical appliances, the toilet bowl, the water tower valve, and the water purifier valve.

2. Turn on a faucet at home that is lowest or closest to the water meter, use a bucket to connect the remaining water in the pipe, and then mix food-grade citric acid according to the remaining water connection.

3. Dissolve in 50-60 degrees of warm water according to the ratio of 1 kg of citric acid to 10 kg of water, try to dissolve citric acid in more warm water, and keep it for later use.

4. Soak in citric acid for half an hour, start cycle pulse cleaning, when cleaning, you need to open the filter screen on the faucet, and you need to open the faucet one by one, and then open the next faucet after the cleaning is completed.

5. After all the water pipes are cleaned, then the electrolytic tubes can be cut off from the machine, and all closed valves can be opened to restore their original state.

If the water pipe is blocked, then you look at which part, if it is in a public area, you will notify the waterworks to come over for maintenance, if it is the pipe blockage inside your home, then it is recommended that you find a plumber to help you fix it, or you can try to turn off the water valve first, and then open the valve at home to see if the water can flush out the sediment in the pipe, and then you can install the valve after it is flushed, so that it can be used normally.

To unclog water pipes, you can use the following methods:

1. Pressure dredging method.

Fill the clogged water pipe with water and apply high pressure to remove the blockage.

2. Chemical agent dredging method.

A chemical reaction between chemical reagents and blockages is used to unblock water mains. ......By adding a chemical agent to the clogged water pipe, it will cause a chemical reaction with the blockage to dissolve or soften the blockage, and the blockage can be removed.

3. Use tools to dredge. ......For example, using a wooden stick to poke out a blockage.

All three methods are feasible for water pipes that have not yet been installed in the pipeline. ......However, for water pipes that have been installed in the pipeline, it is necessary to analyze the method to use to clean up the blockage on a case-by-case basis. ......Since the water line is relatively closed, it is difficult to get the blockage out of the pipe, so the best way is to replace the blocked part of the pipe.

This not only clears the blockage of the pipeline, but also completely removes the blockage in the water pipe.

Can be used with waterway unclogging agents: Waterway unclogging agents are especially useful for clogging caused by hair, greasy, paper, etc. It is widely used in restaurants, hotels, homes, etc. for dredging vegetable sinks, basins, bathtubs, floor drains, and toilets.

Do not damage sewer pipes (including PVC pipes), do not damage the electroplating layer.

Tool dredging method: use professional pipes to dredge equipment.

Pressurized dredging method: open the end of the pipe and use a pressurized pump to increase the water pressure for dredging.

Surgical dredging method: Directly remove and replace this section of the pipeline when it is known which section of the pipeline is blocked.

Chemical dredging method: In the case that the pipeline is blocked by water alkali, soak it with food-grade citric acid and open the end to rinse.

First, dredge with special tools, second, dredge generic citric acid with chemical preparations, third, use pressurization method to increase the pressure of water for dredging, and fourth, you can cut off the blocked place with a new one.

Water pressure, chemical dredging, tool dredging and other methods can be used for dredging! If the pipeline is seriously blocked and difficult to deal with, it is recommended to find the blockage point, directly remove and replace this section of the pipeline!

Most of the blockages in the water pipelines are caused by the rust and scale in the water for too long, and this situation occurs most in the joints and turns.

If there is a snakeskin hose throughout the line, it is more likely.

This can't be dredged, unlike the sewer pipe with foreign objects falling into the blockage, and the blockage can only be replaced.

Use high-concentration vinegar and baking soda, first pour an appropriate amount of cooked baking soda into the drain, and then pour an appropriate amount of high-strength vinegar, and the soda powder and vinegar have a violent chemical reaction to remove grease and other sticky things in the pipes.

If the water pipe is blocked, it can only be replaced with a new pipe, if it is in your home, it needs to be replaced by yourself, if the public water pipe is outdoors, the water company needs to come forward to deal with it.

If the water pipe is blocked, you don't need to dredge it, just call the water supply company, and they will come to repair it, because you don't use water, and they can't collect the water bill.

You can move your arms, and if you have the conditions, you can move and turn your arms, and do gymnastics, which can relieve the pressure on your body and make you feel much better.

Sixth, if there are green plants indoors, you might as well look at the green plants to adjust your irritable mood, and the plants will have a fragrance, which can make people calm down quickly.

If the water pipe is blocked, you can call the waterworks or find a plumber to repair it, and everything will be solved.

The method of dredging the blockage of the tap water pipeline is generally to cut it in the middle for dredging, but first to find the place of dredging, otherwise it will be half the effort.

There is no way, only to increase the water pressure, or to pressurize the recoil from the water outlet

Clogged water pipes. You should find a water service worker. It's going to go smoothly. Fix it.

How to unblock tap water blockage? How to unblock tap water blockage? Tap water blockage should be reported for repair, and the water company has a professional master to repair it.

This can only be judged to be the contact or valve blocked, and then unloaded.

Tool: Pressure pipe unclogger.

Here's how:

1. Pour half of the sink hot water into the sink.

2. Place the pipe dredge at the sink outlet. If your sink is double-ended, use a cloth to block the unblocked outlet to make sure the pressure on the unblocked outlet is concentrated.

3. Repeatedly press the dredge vigorously and quickly. Then quickly lift the unclogger to see if the water is starting to drain away.

4. Continue to do this until the pipeline is dredged.

Hello! 1.First of all, we need to check the water pipeline, understand the circuit of the pipeline, and then determine the specific dredging and cleaning plan.

2.Before dredging, we should prepare our own three-way warm water, and dissolve one kilogram of food-grade citric acid for later use, and then connect the washing machine and the air compressor.

3.Turn the main inlet valve to the closed state, drain the water in the water main circuit in the home, then remove one of the faucets and connect the faucet to the cleaning equipment where we need to clean the water pipes, and prepare for cleaning. Put the dissolved citric acid into a bucket of water in the suction tube.

Then the leak test is carried out first, and then the liquid injection is cleaned.

4.Using the liquid injection function, a citric acid solution is injected into the household water pipe. Turn on each faucet in turn until the citric acid solution fills the water pipe. Let sit for about 20 minutes.

After a few minutes, the scale in the water pipe is almost softened, and the scale on the inner wall of the water pipe is pulse cleaned using the pulse function of the washing machine. Then open the main valve and flush until the faucet comes out of the clean water, that is, the cleaning is complete.