What causes mold on the floor at the bathroom door? What to do?

Because it is in a damp state for a long time, it will become moldy, and only need to replace the floor to solve the problem.

The floor at the door of the bathroom is moldy, because the water in the bathroom splashed at the door, and the water at the door was not cleaned up in time, causing the floor to be soaked in water for a long time and moldy.

The floor at the door of the bathroom is moldy This is because the bathroom is very damp and not ventilated in time, so there is mold.

Because it is too humid, open the windows frequently for ventilation, and keep the floor dry and clean!

What causes mold on the floor at the bathroom door? What to do? Because people's regular hot water will seep into the mixed mortar layer according to the tile joints, if the infiltration exceeds the evaporation of the water surface, then for a long time, the water will fill the mixed mortar layer and seep into the room according to the mortar layer.

A lot of water evaporation will cause moisture to reach into the wooden floor, which in turn will cause the wooden floor to become damp, moldy and blistered. In addition to the mold blistering that causes the solid wood floor, the moisture in the bathroom will continue to cause the problem of blistering the paint on the bathroom walls that we often see. The ground on the first floor is damp.

If your home is on the first floor, there is a possibility that it is caused by the return of moisture on the ground.

Distinguishing method: If it is caused by the dampness of the road surface, then the mold and blistering of the wooden floor is not easy to be limited to the door of the bathroom, and you can see if there is this problem in other places, if there is, it may be caused by moisture. Leaking water from underground water pipes.

There is also a possibility that the mold and blistering of the wooden floor is caused by the cracking and seepage of the water supply pipe, and the water seeps into the bedroom according to the mixed mortar layer of the road surface.

Distinguishing method: If the water supply pipe bursts, then because the water is a continuous leakage, the final conclusion will cause water to bubble up from the indoor floor or water to seep into the bottom of the building according to the concrete floor slab. Naturally, this is not enough to prove that the mold and blistering of the wooden floor is mainly caused by the bursting of the water pipe, because even normal hot water can seep into the tile joints can cause this problem.

Wet and dry partitions in washrooms. The dry and wet partition can prevent the toilet floor from being wet and cold on a large scale, and the water in the shower area is more concentrated and can be quickly discharged from the odor-proof floor drain, thereby reducing the amount of water infiltration and reducing the occurrence of moisture.

The toilet door sill is made of waterproof piers. The waterproof pier is a concrete retaining strip made at the door threshold of the bathroom door, and the waterproof pier does not need to be too high, only 1-2cm can be. If there is no waterproof threshold, the toilet under the floor tile is connected to the middle of the room, and the water will run to the wooden floor, causing the wooden floor to blister.

Bathrooms do waterproofing. The bathroom is waterproof to resist the infiltration of water vapor, and I believe we all know it, so I don't introduce it here.

Due to the prolonged humid environment and the fact that it is not cleaned during cleaning, bacteria will grow, so wash carefully with disinfectant1 and a brush.

The bathroom door is generally more humid and humid. Choosing to use wood flooring is very easy to mold, so be sure to pay attention to daily use and care.

This is due to the lack of good ventilation, or it may be caused by water leakage, which requires attention to maintenance.

1. The damp and mildew of the floor is caused by moisture or insect moth, you can disassemble the floor for ventilation, bask in the sun, and put desiccant when reinstalling.

2. Do a good job in the sanitary treatment of the floor, the floor with dust and dust is easy to absorb water, and it will adsorb bacteria, which is more likely to cause the floor to be damp, mildew and blackened.

3. The floor is blackened because it is damp, so it is necessary to find a professional to check and find out where the water is leaking. If you find the leakage, you must first guess the empty space to repair the leakage and do a good job of waterproofing measures for Suiheng blind, and then treat the damp floor.

4. If the floor is too flat and there is no inward slope due to the laying of the floor, it is necessary to pry the floor of the bathroom, re-plan the laying, and accurately grasp the angle of laying, so that the ground water will not flow to the outside when bathing or washing water.

5. If there are mildew spots on the floor, you can do not have to make a big deal at first, first use sandpaper to stop and grind clean, adjust the strength, and wipe with a towel to "wash" the dirt in the wood grain, so that the floor is uniform and smooth, and wash until the wood grain is white, and then use color paint or paint to paint and clean.

6. If there are not only moldy spots on the floor, but also blackening. Then you need to remove the rotten floor, remove the moisture, replace it with some new flooring to prevent mold from developing the rest of the floor, and re-waterproof the toilet door. Note:

If the floor is seriously moldy, it is useless to rinse it with water.

1.Clean restroom doors: Use detergents and sponges to clean doorways, including door frames and door edges, to remove mold and dirt.

2.Keep your restroom dry: Mold thrives in humid environments, so to keep your restroom dry, use a dehumidifier or open doors and windows to ventilate.

3.Use antifungal agents: The use of antifungal agents can effectively prevent the breeding of hidden suspicions in the mold hall, and professional anti-mold agents are used for treatment.

4.Patch the crack in the door: If there is a hole in the crack in the bathroom door, you can use sealant to repair it to prevent moisture from seeping in.

5.Replace the door: If the door is too moldy to be cleaned, consider replacing it with a brand new bathroom door.

1. The surface layer is moldy.

Simple surface mold can be cleaned with homemade detergent, mixed with warm bleach and water in a ratio of 1:3, and wiped with a soft cloth dipped in detergent on the moldy area. If the surface layer of the severe point is moldy, you also need to sandpaper to sand the moldy area, remove the mold, and then repaint.

2. Internal mold.

If it is the case of internal mold, there is really no way, you can only spend a lot of money to replace the moldy floor, you must know that living in a moldy space for a long time is also very harmful to the body.