Will the door ringing if it doesn t close completely?

Sometimes when the car turns off and opens the door, it will sound a "Dididi" alarm, which sounds quite irritating, so many friends want to know how to remove the alarm after opening the door. In fact, there are three main ways to disarm the siren. How to remove the alarm sound behind the open door 1, check whether the lighting equipment is turned off.

If the vehicle does not turn off the headlights after turning off, then the driver will send an alarm when the driver opens the door to remind the driver to turn off the lights, at this time we only need to twist the light knob to the off position and the alarm sound will disappear; 2. Start the vehicle. If you use the remote key when you lock the car, but use the mechanical key when unlocking, the vehicle's alarm will sound. In fact, we only need to start the vehicle alarm and the sound will disappear automatically; 3. Press the unlock button of the vehicle.

If the owner uses a mechanical key when opening the door, the alarm system will be triggered, and when the alarm goes off, we can press the unlock button on the key, and the alarm sound will disappear. Why does the main driver open the door with a ticking sound? It's normal to have a ticking sound behind the main driver's door, as the vehicle is alerting you that the door is open.

Usually, if the door is not fully closed, the car will also sound an alarm to remind the driver that the door is not closed, and at the same time, the vehicle instrument will also show which door is not closed, and the sound will disappear when the door is completely closed.

There are three levels of light switches in the car, one is completely closed, the other is open straight-through state, and the third is the warning state in series with the normally closed switch of the door; Generally, the switch is turned on in the third gear, when the door is not closed tightly.

The abnormal sound of the sealing strip of the new door is because the sealing strip has not been lubricated for too long, resulting in drying, or the sealing strip has not been maintained for a long time, resulting in hardening and aging. Especially on rainy days or on rough roads, there will always be a grinding sound when driving the door.

Sealing strip squeak and squeak solution:

1. First of all, you can use the relevant lubricant of the sealing strip for lubrication, but many car owners say that this method is useless. Therefore, it can be repaired with door repair wax, which can effectively make the sealing strip soft and elastic, and it can be effective after about 10 minutes of application.

2. If there is still an obvious abnormal noise, and the seal is still hardened and aging after repair, the door seal of the abnormal noise needs to be replaced, so as to eliminate the abnormal noise.

3. If there is still noise, it may not be caused by the drying and hardening of the sealing strip. It may be due to the abnormal noise caused by the wiring harness inside the door hitting the door panel. It is necessary to remove the abnormal noise of the door and then fix the wiring harness inside, otherwise the car will shake when it is moving.

4. It is possible that the door connection hinge produces abnormal noise, and relevant rust prevention and lubrication need to be carried out, otherwise the hinge will be abnormal and rusty.

If these places are treated, there is still an abnormal sound, which may be caused by the tightness and looseness of the trolley. It is necessary to adjust the tension of the door to the appropriate position and fine-tune the lock of the door. This ensures that the door is in the correct tension and there will be no abnormal noise.

If the door strip has been severely deformed or worn, the owner needs to replace the sealant strip to solve the problem of friction and squeak. In addition, it is recommended that the owner maintain the rubber seal of the door every six months, and if the area is hot and the car owner drives frequently, the maintenance cycle can also be appropriately shortened.

Maintenance of the door seal:

1. The owner can clean the rubber sealing strip with car cleaner, and then apply a layer of protective agent to avoid the sealing strip being too old.

2. The owner can also often use a brush to remove the dust on the door strip and keep the door strip clean.

3. Pay attention to check whether the door strip has cracks, serious damage, and replace it in time if there is any.

If there is an abnormality in the sealing strip of the door, it may be caused by the aging of the sealing strip. Therefore, car owners should replace the sealing strip regularly for a better experience.

You can replace the sealing strip in time, or you can stick the tape in this place, and usually open and close the door gently.

To open it gently, the door should also be gently closed, the seal inside can be replaced, and the door can be wrapped with adhesive tape.

Tell the staff who bought the car to ask these people to help them change a car, or else a seal.

This is the sound of a door chain or a stopper! It is recommended to lubricate with grease first, and if it can't be solved, it is recommended to replace it! There are many reasons for abnormal noise when closing the door, such as abnormal sound of door hinges, abnormal noise caused by loosening of some parts in the door, etc.

The door of the car is hinged, so the hinge may be stuck for a long time, and closing the door will produce abnormal noise. The solution is simple, apply some grease to the door hinges. This method is very easy to solve, the need for lubricant to add a little oil to the hinge of the door opening and closing can be done, that is, the door hinge friction time is loose, wipe some lubricating oil or replace the door hinge on the OK to add some lubricating oil to the connection of the door.

The sound of closing the door indicates that the door shaft is deformed. First of all, this situation is related to some of our bad habits of closing the car door, one of the most common is to repeatedly open and close the door when the window is not completely closed, which leads to the loosening of the door glass and the loosening of the window regulator screws. In this way, when the door is closed or the vibration is generated by high-speed driving, the car starts and the door is abnormal, and the left foot slowly steps on the clutch and the B-pillar of the car is deformed, and it is necessary to send it to the 4S shop to correct the B-pillar immediately.

Use a rag or paper towel to wipe the floating ash of the above parts clean, use a cotton swab with a little lubricating oil to repeatedly apply the parts of the door hinge and the red circle of the limiter, and then repeatedly open and close the door, repeat the steps of applying oil and repeatedly opening and closing the door until the abnormal noise disappears, be careful not to apply too much lubricating oil.

The most susceptible to abnormal noises should be the car windows, and they occur more often at the front door, especially the driver's side door. Usually because the glass and rubber sealing strip are too dirty or a foreign object has fallen into it, causing a friction sound. At this time, the driver can first do it himself to simply clean up the window gap, which is considered an abnormal noise, and it is not very simple to find the reason, first eliminate the method, and finally focus on a certain position, and then disassemble to see the problem, many are just a certain original loose caused by abnormal noise.

You can go to 4S for a worry-free checkup.

It is very likely that the hinge of the door, after a long period of use, it will make such a sound, you can add more lubricating oil, you can solve such a sound, it may also be that there is a problem with the door limiter, at this time you can remove the grease and stains in the limiter, you can also solve the sound, it is also possible that the spring of the door has aged and is about to break, so you should check and replace it at this time.

It is likely that the chain is loose, it may be due to a long period of use, it may be due to dirt on the door limiter, or it may be due to the aging of the car's sealing strip.

It could be because some parts of the door are loose, or it may be because the seal is broken, so there will be a noise.

It is very likely that the door is not closed properly, or the quality of the car door itself is not very reliable, so there will be some sound when using it.

1. The internal damping plate of the door is missing or pasted in the wrong position (the function of the damping plate is to simulate increasing the thickness of the door plate and eliminating the resonance of the door plate when the door is closed).

2. The door lock is poorly adjusted, resulting in insufficient compression of the door frame sealing strip when closing the door (in addition to the sealing effect of the door frame sealing strip, it also has the effect of improving the sound of Zen filial piety closing the door).

3. The position of the door hinge and the lock The control of the door hinge is about the control of torque, and the position of the lock will determine the state of the lock and the lock, and the requirements cannot be low or high, otherwise it will cause interference between the door lock and the lock, resulting in a greater tightening force.

We often go to the repair shop for repair because of some small problems, the price we hear is completely different from what we estimated, sometimes it is ridiculously high, and then we don't understand, in order to restore the car to its original state, often we pay for it, in fact, sometimes because the repair shop doesn't want to repair it, it gives us all.

Clean with carburetor cleaner, dry and then add some oil.

The door and the body are connected by hinges, just like the doors at home, and it is normal for the hinges to make a sound after a long period of use, in order to ensure that the pulleys are smooth and silent for a long time.

In addition, there is a thing connected to the door and the body, which is the door limiter, as the name suggests, it is used to limit the degree of door opening, one is to limit the maximum opening of the door; The second is that the door needs to be kept at a certain opening angle.

There are also some cars with general assembly technology, and its door limiter is easy to deform, and then produce noise, at this time there is no way but to replace it.

If there is a rattling sound in the door opening and closing of the door, you can put some lubricating oil, clean the door limiter, and check the sealing strip, which is described as follows

1. The auto parts between the door and the body need to be lubricated after a long time. If the lubrication is ineffective, there is also a possibility that the part is in disrepair and needs to be completely replaced.

2. The door and the body are connected by hinges, just like the door at home, and the hinges are used for a long time to make a sound is a normal phenomenon, in order to ensure that the pulley is long-lasting, smooth and silent, you can regularly add some lubricating oil maintenance every 2-3 months.

3. There is a thing connected between the door and the body, which is the door limiter, as the name suggests, it is used to limit the degree of door opening, one is to limit the maximum opening of the door; The second is that the door needs to be kept at a certain opening angle, which is why the door will not pop back on its own. The door can be opened to the maximum opening angle, and the grease and dirt on the surface of the stopper arm, stopper pin and connection bracket can be cleaned.

4. Check whether the door sealing strip is aging, because the sealing strip is a rubber product, and for a long time, the sealing strip will gradually age and break, which will make the driver and passengers feel the obvious wind noise and friction sound. If the seal is aging and damaged, it is recommended to replace it directly, and regularly clean the dust and rain between the gaps of the seal when using the car regularly, which can prevent aging.

Notes:

1. Usually protect, do not push strongly. Pay attention to the usual care when using the door. The load should not be too wide and should not be pushed forcibly.

2. When carrying out daily maintenance of the vehicle, it is necessary to always check the flexibility of the door opening, and gently push back and forth to see if it is flexible and free; Listen for any abnormal noises when pushing.

The door opening and closing door creaked, the door opened and closed with a sound, and I was very annoyed, and I drove to the repair department, and the master smeared the tiger head between the door hinge and the slideway Door hinge and slideway lubricating oil, and there was no abnormal sound in opening and closing the door.

These three aspects can be checked::

1. Door limiter.

The sound will only be made when the door is opened and closed, indicating that the source of the problem is most likely at the connection between the door and the body, such as the door limiter. The so-called stopper is a device that restricts the rotation of the door, which can effectively protect the front frame of the door when the door is rotated by force, avoiding wear and tear caused by direct contact with the body. When the car is too old and the service hole does not pay attention to the maintenance there, the limiter is easy to rust, causing the door to make noise.

If the limiter is found to be aged and rusted during inspection, you can apply butter or lubricant to effectively improve the squeak of the door.

Second, the door hinge.

In addition to the limiter, there are also door hinges at the door junction – so you can also check this area when the door makes a noise. Unlike limiters, hinges are prone to problems such as door sinking or door closure caused by insufficient connection stiffness, which is mostly caused by hinge deformation. If the above conditions are found in the examination, you can also apply butter or lubricant to improve the aging and decay.

3. Sealing strips.

Door squeaks can also be checked for seals. As we all know, the sealing strip is a rubber product, and if it is not cared for, it is easy to age, and it will cause abnormal noise and even break when opening and closing the door. The solution to this point of failure can also be viewed from two perspectives:

One is lubrication, first wet the sealing strip with water, and then evenly apply soap, and the situation will be alleviated a lot after the soap is naturally dried; The second is to replace the sealing strip, but blindly replacing it cannot fundamentally solve the problem, or pay attention to the usual maintenance.

If the door is locked with a remote control key, it is very likely that the remote control key does not work due to factors such as the failure of the remote control lock or the deification of the antenna of the remote control transmitter on the car.

There is also a situation where there is strong magnetic field signal interference around the car, because the smart key uses low-intensity radio waves, it is stupid to work normally in the case of magnetic field interference.

The solution to the abnormal sound of the door opening and closing door is as follows: 1. The abnormal sound caused by the jerky hinge of the hinge: the abnormal sound caused by the door hinge is similar to the abnormal sound of the door.

2. Abnormal sound caused by the aging of the sealing strip: because the gap between the sealing strip is easy to be stuffed with sand and dust, the sand and dust should be cleaned frequently with a brush, and then coated with a layer of highly permeable protective agent to prevent the aging of the sealing strip. 3. Abnormal sound caused by dry friction of interior panels:

To deal with this abnormal noise, you can use something like "interior parts maintenance agent", 3M series products have this kind of thing, its main role is lubrication, spray along the seam part of the sound, it will be immediately reduced. 4. The windshield enters the dust: Generally, this situation will occur on the front windshield, which may be thought to be caused by the loose plastic cloth bayonet of the central control, but in fact, it is caused by the windshield entering the dust, as long as the adapter plate is removed and cleaned up, the problem can be solved.

5. Electric glass lifting noise: first check to see if it is because there is too much dust in the sealing strip on the window, which causes friction between the dirt and the glass, if this is the case, clean up the sealing strip to solve the problem, and there is a situation that there is a problem with the glass lifter, it is best to go to the repair shop to overhaul it.