Floor heating should be installed at home, and what floor heating is easy to use

In the general market, there are domestic, joint ventures, imports, and now floor heating is more common and the technology is more perfect, so the domestic ones are not bad, and the domestic ones are relatively cost-effective.

More and more households are choosing to install underfloor heating for the winter. This is not only an improvement in the quality of life, but also a manifestation of care for the family. In the reporter's survey of owners, more than 7 percent of the owners felt:

Improving the quality of life is a kind of care for the family. The installation of underfloor heating has become an urgent need for families in the south.

As a high-tech floor heating product, carbon fiber floor heating uses high-tech space conforming materials with a high efficiency heat conversion rate of more than 98% carbon fiber, as well as the characteristics of rapid heating and far-infrared health care therapy, which has become a new bright spot in the floor heating industry. However, as a concealed engineering system, it is not easy to rectify once laid, so the quality of the floor heating system has become the core element.

The following is a comparison of mainstream underfloor heating products:

Carbon fiber electric underfloor heating and traditional plumbing:

1.Initial installation cost: large apartment, the initial installation cost of the two is comparable. However, when the house is small, the best advantage of carbon fiber electric floor heating is obvious, that is because the area is small, and the cost of the wall-hung boiler for plumbing is high.

2.Cost of use: wall-hung boiler plumbing - 6-10m3 of natural gas per square month. Due to the slow heating of the plumbing, it must be turned on every day.

Carbon fiber electric underfloor heating – 120-140 watts per square meter. The electricity time for working is 5-8 hours a day, and the cost of carbon fiber electric floor heating is more economical under the implementation of the stepped electrical price policy for houses of the same area.

Maintenance cost: wall-hung boiler plumbing - annual maintenance of water separator (to be replaced in 5-8 years), valve leakage-proof, 2-3 years to clean the water coil, 8-10 years to replace the wall-hung boiler.

Carbon fiber electric underfloor heating – 50 years maintenance-free.

As the world's most cutting-edge technology in the field of carbon fiber, Japan has a leading advantage in the development and production of carbon fiber technology, and the United States cannot compete with Japan in many aspects. Relying on the strong technical support of Shell Local Heating Japan Technology Center, Shell Local Heating focuses on the R&D and production of carbon fiber floor heating. In line with the concept of "paying attention to cutting-edge technology and arming products with science and technology", Shell Local Heating closely follows the world's most cutting-edge carbon fiber technology and draws on the new technology used in the field of global carbon fiber floor heating.

The shell local warm European standard line and national standard line are made of T700 filament carbon fiber from Toray Company of Japan.

There are two types of floor heating, water heating and electric heating. My home is electric heating, Israel aht, very good.

I've consulted professionals. Considering the factors of economy and comfort, it is best to use water and floor heating for home heating. Heating: Floor heating is the best choice in terms of comfort, and floor heating has electric heating and water heating, and the cost of electric heating is higher compared with these two. If you have that, please consider it.

Regarding the operating cost, the cost of electric heating must be higher than that of water heating, and the other is, due to the high heat load per square meter of electric heating, therefore, whether the power of household electricity can reach normal use, the result is informed: it cannot be reached! FYI!!

Considerations for underfloor heating users.

1. The water supply temperature of the low-temperature hot water floor radiant heating system should not exceed 60, and the working pressure of the heating system should not be exceeded.

2. In the process of starting water supply or use of the floor heating system, air may accumulate in the pipeline, which will affect the heating effect.

3. The floor heating pipe laid under the ground is only about 3-4cm away from the ground, and it is easy to hurt the floor heating pipe by smashing and knocking on the ground, so it is strictly forbidden to wedge any sharp object on the ground to prevent damage to the floor heating pipe.

4. When the user really needs to drill holes on the roof, it is necessary to pay attention to the depth of the drilling hole cannot exceed the thickness of the floor slab structure to prevent damage to the upper floor heating pipes.

5. It is strictly forbidden to place a high-temperature heat source near the water collector and on the ground where the floor heating pipe is laid to prevent damage to the pipeline system.

6. In the heating season every year, the water temperature should be strictly controlled when the system is run for the first time, first adjust the water temperature adjustment button of the gas furnace, set the water supply temperature at 25-30, and after a week of operation, the water supply temperature will be increased by 5-10 per week until the required water supply temperature is reached. Normal use is not allowed to carry out a sudden rise and fall of large temperature difference, when the surface temperature of the floor exceeds 26 or the temperature of the stone floor exceeds 30, the water supply temperature should be lowered immediately.

People's level is constantly improving, and many people will install underfloor heating in their homes. Because in the cold winter, we can choose underfloor heating, which is generally used in the north. So what kind of floor heating is good for installing floor heating, let's take a look with us today.

1. Water floor heating: In general, in the early stage of installing water floor heating, the cost is still relatively high, and it is more troublesome to repair the later problems, and the coil needs to be cleaned once in 2 to 3 years. However, its heating is very stable, suitable for the elderly and children, and its life span is relatively long, and it can also provide hot water for our daily use.

Water floor heating is more suitable for heating areas with an area of more than 50 square meters, such as villas, townhouses, etc.

2. Electric floor heating: it cannot provide hot water for life, and there is radiation; The circuit requirements for the home are still relatively large, and it is not suitable for large-area installation. Water underfloor heating does not need to be maintained, nor does it need to be cleaned, and the maintenance cost in the later stage is also very low.

How many pipes are used for floor heating per square meter.

1. A square generally requires 5-7 meters of floor heating pipes. If you use a geothermal pipe with an inner diameter of 16 mm in 7 meters per square meter, 66*7=462 meters.

2. Each water separator can load up to 35-45 meters of geothermal pipes, if it is exceeded, the flow rate of hot water will slow down, and the room will not be hot. If the actual usable area is about 52 square meters, it is necessary to use about 300 meters of geothermal pipes, and then at least 8 water separators.

3. In accordance with the requirements of national product standards, the raw materials for the production of plastic pipes and plastic pipe fittings for cold and hot water must be in accordance with the provisions of GB T18252-2000. No matter what brand of pipe is used to lay floor heating, it is only possible to use it that meets the requirements of product standards.

In general, in the early stage of installing water floor heating, the cost is still relatively high, and it is more troublesome to repair the later problems, and the coil needs to be cleaned once every 2 to 3 years; Electric underfloor heating: it is not able to provide hot water for life, and there is radiation.

Underfloor heating is considered to be the most comfortable heating method nowadays, and many people give up the heating method of radiators in favor of underfloor heating. At present, there are two types of floor heating methods: electric heating and water heating. Electric floor heating and water floor heating both have their own advantages, can not be generalized to determine which kind of floor heating is good, can only be based on the actual needs and use of their own suitable floor heating.

Comparison of pre-installation costs: The pre-investment cost is a problem that consumers are more concerned about, and three points of electric floor heating lie in the installation, and seven points lie in the quality. Water underfloor heating is the opposite, using seven points of installation and three points of quality.

Generally speaking, the installation system of water floor heating is composed of multiple combinations, but electric floor heating is independently designed and manufactured by a brand, and the whole system is safe and secure. After the comparison of the two, it is recommended that the heating area is 90 square meters and the electric floor heating is used, the floor heating is 90-160 square meters, and the plumbing is more cost-effective. Comparison of daily use costs:

The cost of electric floor heating, if you use electric floor heating, the heat load per square meter is higher than that of water floor heating, according to 130w per square meter to calculate, 100 square meters of heat load is 13kw per hour, according to the whole day of operation 12 hours to calculate, the required heat dissipation is 156kw, according to the average electricity cost of the original calculation of the daily operating cost in yuan, then the operating cost of electric floor heating for a month is: yuan, the use of electric floor heating in a heating season is: 6552 yuan.

If the cost of using water and floor heating is a water floor heating system, taking a 100 square meter room as an example, the average heat dissipation per unit is assumed to be Q = 40W m2 (this assumption is the same for both). Then the calories that need to be consumed per unit time of a 100 square meter room are: 40*100 = The calories that a square meter room needs to consume in a month is:

4000×30×24×60×60=10368×1000kj。