Is it easy to learn to build a computer? Is it profitable to build a computer and sell it? Can anyon

It's not difficult to learn, familiar with computer hardware and general maintenance knowledge, as long as you choose the right place, you have a certain storefront, the decoration is better, and the business is still relatively good, of course, your ** can't be too high!! If you can do it, this is also a lucrative industry!!

Learning is quite easy to learn to make money, that's also for sure, someone wants it, that's also a must The key is that you have to ensure that the goods are genuine, service*** Isn't it just an after-sales service for others to buy a brand As long as you can do these two things, designate the line.

I'm telling you that it takes a lot of effort to get someone who doesn't know you to trust you and assemble a machine in your place, and it's not something that ordinary people can do. So you have to have friends in this area to do this, and starting from scratch also requires opportunities and your own circle of friends and your own abilities.

There's no industry that can't make money! The key is that people are not in business, how can you not make money if you do a good job!

Assembling a computer is easy to learn Assembling a computer can earn 200-600 yuan per unit Putting the store in a decent place is not too small, and it is better if you have a wide range of interpersonal relationships. However, remind you that the trickiest thing about selling computers is after-sales, unless you hire a technician who specializes in after-sales service, computers are easy to assemble, and it is difficult to repair computers.

It's easy to learn, but it's mostly how you run it

If you're building a low-end performance computer. The profit is about 150 200 or so. If you build a low-to-mid-range performance computer, the profit is about 200 280 or so.

If you are assembling a computer with mid-to-high-end performance. The profit is about 280 400. If you build a high-end performance computer, the profit should be around 450 600.

In fact, the profits of computer assembly come from nothing more than motherboards, graphics cards, memory, chassis, hard disks, monitors, power supplies and ***, CPU. Among them, if calculated according to the mid-to-high-end performance, the graphics card is about 380, the profit is about 30, the memory is 4G, 85 is one, the profit is about 30, the motherboard is 750, the profit is about 50, the hard disk is 500g, the ** is about 400, the profit is about 50, the display is 22 inches 500, the profit is about 50, the chassis is 200, the profit is about 30. In fact, the profit of power supply and *** is relatively small, and the profit is about 30 together, and the CPU 4 core, about 500, is about 70.

My budget is still relatively honest**, if it is a black-hearted boss, the minimum profit of such a configuration can earn more than 500. If you are assembling a high-end performance computer from a black-hearted boss, I estimate that you will have to cheat you at least more than 1,000. In fact, you can also budget like this, according to the proportion of 10%, assemble a computer of about 2000, and the profit is 200

Assembling a computer of about 5000, the profit is 500 Those who assemble computers are said to be not profitable, in fact, people who know a little bit about the industrial chain in this industry chain know that the profit is still relatively large. For people who don't know how to use computers, it costs 30 yuan to install a system where the computer is assembled, and this 30 yuan is a matter of 5 minutes. It is said that the computer is not profitable, in fact, there are more businesses, we have more choices, the competitiveness of the merchants is too strong, you have the ability, there is the capital, you try your best to reduce the ** to attract customers, and those who have no capital can not compete with you, so naturally they have to close.

You don't need to buy a sound card, the motherboard has an integrated one, unless you are a professional and have requirements for sound quality, you need to buy a separate sound card.

Five thousand words can be equipped with a good configuration, for your reference.

The monitor is not recommended for online shopping, because the screen must be tested on the spot for bad pixels, and online shopping does not include a perfect screen.

It is most affordable to assemble your own computer, and in the case of the same hardware, the assembly machine will save 20%-30% of the money compared to the finished machine.

1. There are three key points in building your own machine: you can configure, you can buy, and you can install.

"will configure" means that according to their own use requirements and economic conditions, determine what grade to match, write out the list of computer hardware configurations, and then buy according to the list. This requires you to have a sufficient understanding of the various hardware that can be installed in the computer, otherwise you can't write, and you can't write it yourself, but you can ask a friend to help.

"Will buy" is the most important part of assembling a computer by yourself, just like buying watermelons in the market, you can bargain and choose, you can spend less money, and you can buy delicious watermelons, on the contrary, you can spend more money, and you can't buy delicious melons.

To be able to buy computer hardware, you must master the brand, performance and quality of these hardware, and have the ability to identify the real and fake, and then bargain for the deal by shopping around. The hardware bought in this way costs less money, and the computer assembled with these *** and less expensive hardware is naturally a cost-effective love machine.

"It is relatively easy to install, that is, to assemble these hardware you bought, according to the requirements, the host is the big head, to put the motherboard, CPU, memory, graphics card, sound card, network card, hard disk, optical drive, power supply, etc., into the chassis, and connect it, the following monitor, mouse, keyboard and other host connections, and then connect to the power supply, boot and install the operating system, and you're done.

If you are a novice computer, you want to "configure, buy, install" the computer, just by what I said above is far from enough, it is best to ask the people around you to help, please accompany you to build a computer, through the computer you will learn a lot of computer knowledge, can smoothly buy a self-satisfied, cost-effective love machine.

Novices can assemble a computer and build it by themselves.

Is it difficult to assemble a computer? But you still need to know these tips.

Desktop computers, how to assemble a desktop computer?

It is recommended that it is best not to assemble it yourself, because it is very cumbersome that LZ has not assembled parts or anything, and if there is a problem, you don't know which step is the problem, it is recommended to buy a ready-made one.

It is not difficult for novices to assemble a computer. It is best to have someone you know nearby as a backup, and you can communicate with each other. Don't buy a sound card, even the graphics card has to come with the motherboard, and the budget is not too high, 2 3 thousand is better, after all, it is a novice installation, 2 3 thousand computers can already adapt to most games.

If you don't have installation experience, it is recommended not to do it, because it is easy to damage the CPU interface, power socket, etc.

Most motherboards have an integrated sound card.

The configuration of the notebook looks high, and the actual performance is about 20% off, mainly due to heat dissipation.

Summary. Dear We will be happy to answer your <>

It is better to buy a complete computer machine and assemble a DIY machine, and assemble a DIY machine. The advantage of the assembly machine is that it can be better matched to the right computer, which can make the configuration more in line with your heart, but the cost of learning is high, and there are more tools that need to be involved. [salute] [than heart] <>

Which is better, buying a complete computer or assembling a DIY machine?

Are you there. Why hasn't there been a reply yet.

Are you there. Dear We will be happy to answer your <>

It is better to buy a complete computer machine and assemble a DIY machine, and assemble a DIY machine. The advantage of the assembly machine is that it can be better matched to the right computer, which can make the configuration more in line with your heart, but the cost of learning is high, and there are more tools that need to be involved. [salute] [than heart] <>

<> assembly machine is better.

You can install the desired part configuration according to your needs. <> kiss, do you have any knowledgeable friends?

No, I'm a novice myself.

In this case, the whole machine should not be considered.

Yes. <>

Xiaobai recommends the whole machine.

Because internal parts such as computer graphics cards need to be on-site, they need to be knowledgeable.

Otherwise, it will be unjustly money.

Extended information: The computer is a modern electronic computer machine used for high-speed calculation, which can perform numerical calculations, logical calculations, and also has the function of storage and memory. It is a modern intelligent electronic device that can operate according to the program and process massive amounts of data automatically and at high speed.

A computer that consists of a hardware system and a software system without any software installed is called bare metal. [salute] [than heart] <>

<> which of these two is recommended.

Kiss, what kind of game is it playing?

Massive 3D game.

It is recommended to choose the 12th generation i5.

Good performance. Generally, 3060ti graphics cards come with two or three fans.

You can add your own fan, you can explain it to the store.

The 3060 is preferably three fans.