How to remove the switch button of the gas stove and can t pull it up by yourself?

The gas stove knob switch is used for **, there is oil smoke in the kitchen, the knob switch has piled up a lot of dirt for a long time, and some are rusty, and the switch is used for a long time, and the spring in the switch is not good. So it can be disassembled for cleaning, or replaced. So, how do you remove the gas stove knob?

Here, the credit home decoration network will bring you the disassembly and assembly of the gas stove knob switch.

How do you remove the gas stove knob?

The gas stove knob switch is disassembled and assembled**.

Turn the gas stove around, there is a nut from the inside to unscrew it, the notch of the knob is against the notch of the rotary rod, after the notch, press down with a little force to install it in place, and the inner hole of the cooker knob will generally have a circlip.

Align the inner hole of the knob with the knob rod and press it down hard.

The switch knob has been used for a long time, and it has never been removed and cleaned, and it is too dirty inside, coupled with the usual cleaning and brushing and overflowing water vapor reasons, resulting in rust on the rotating rod in contact with the assembly and the knob, and then the knob is not easy to pull out, you can swing the knob while pulling it upward.

How to disassemble the gas stove:

Start by removing the screws that hold the panel in place and unplugging the control knob. Control panel.

The knob on is matched by friction and can be pulled off directly. Some knobs have set screws in the base, use a screwdriver.

or a universal wrench.

Remove the screws and pull the knobs out again.

The service panel behind the panel can then be removed by unscrewing a set of screws on the edge of the control panel. To remove the front panel, remove the control knob and unscrew the set of screws used to secure the decorative panel to the frame. These screws may be hidden under the flange or tape.

Use a screwdriver to pry open the trims or tapes, or unscrew the screws used to secure them.

It may be caused by oil filling the gaps, so clean it first and then try it with the help of a tool.

The method of removing the knob switch of the gas stove is generally as follows:

1. Close the gas main valve: For safety reasons, you should close the gas main valve and cut off the gas before operation.

2. Check the knob switch: Generally speaking, the knob switch of the gas stove can be unplugged directly. You can try gently shaking the knob up and down while pulling hard up and down to see if you can pull the knob off.

3. If the knob switch is fixed: The knob switch of some gas stoves may be fixed by screws or other means, you need to find the fixing point and then use a suitable tool (such as a screwdriver) to remove it.

4. If the knob switch is removed without auspicious spring method: If you can't remove the knob switch, or are worried about your improper operation, it is recommended to find a professional maintenance personnel to operate.

It is important to note that after removing the knob switch, you should keep it in a safe place to prevent it from being lost or damaged. At the same time, if you need to replace the knob switch, you should choose a product that matches the original knob switch to ensure the normal use of the gas stove.

The special gas stove knob is disassembled**1, hold up the gas stove by hand, and then put it in reverse. 2. Then find the knob and use a screwdriver to unscrew the nut on it, so that only the knob can be removed. 3. When installing a new knob, you can align the notched part of the rotary rod with the notched part of the rotary rod, and then press it down a little harder.

4. Finally, screw the nut back.

Summary. Hello, it is a pleasure to serve you, what to do if the button of the gas stove is pulled out for you to make the following answer for you: if the button is unplugged, first make sure that the gas stove has been turned off to avoid gas leakage.

Secondly, you should find a professional as soon as possible to replace the button. If you don't have a professional, you can try to fix it yourself, but be careful not to let the gas leak to avoid danger. First, remove the unplugged button and clean up any remaining dust.

Then, place the new button in place and fix it. Finally, check that the buttons are installed correctly to ensure safe use.

Hello, it is a pleasure to serve you, what to do if the button of the gas stove is pulled out for you to make the following answer for you: if the button is unplugged, first make sure that the gas stove has been turned off to avoid gas leakage. Secondly, you should find a professional as soon as possible to replace the button.

If you don't have a professional, you can try the dust beam repair yourself, but be careful not to let the gas leak to avoid danger. First, remove the unplugged button and clean up any remaining dust. Then, place the new button in place and fix it.

Finally, check whether the button is installed correctly to ensure safe use.

You've done a great job! Can you elaborate on that?

Hello, it is a pleasure to serve you, what to do if the button of the gas stove is pulled out for you to make the following answer for you: if the button is unplugged, first make sure that the gas stove has been turned off to avoid gas leakage. Secondly, you should find a professional as soon as possible to replace the button.

If you don't have a professional, you can try the dust beam repair yourself, but be careful not to let the gas leak to avoid danger. First, remove the unplugged button and clean up any remaining dust. Then, place the new button in place and fix it.

Finally, check whether the button is installed correctly to ensure safe use.