-
The reason why a gas stove can't light is because the battery has no charge.
-
First of all, you should check the gas stove, whether the battery that ignites the light is charged? Then check the gas stove, do you have any other damage? As a result, the gas stove cannot be ignited.
-
The advent of gas stoves has greatly contributed to our lives, however, it is inevitable that some minor problems will arise when using them for various reasons, such as gas stoves that cannot catch fire. While this is just one of the problems that can arise in the use of a gas stove, there are many reasons why a gas stove cannot be ignited. Two days ago, I was cooking and was preparing to use the gas stove, but it was difficult to start the fire, and I initially thought that the gas valve was not open, but the inspection found that it was not.
So what's going on?
1. The gas stove can't catch fire? Check the cause first and then solve it.
1. There is no gas.
If you don't pay attention to it in daily use, or you are busy, it is common to forget to buy gas, so when you encounter a gas stove that does not catch fire, you must first check whether there is still gas.
Solution: If there is no gas in the gas stove, you can buy gas at the gas sales hall.
2. The battery has no charge.
This is the most common problem, and if there is still gas, it is necessary to check whether the battery is charged when it is found that it is not ignited.
Solution: Just need to replace the battery with a new one.
3. Poor circuit contact.
If the gas at home has been used for a long time, this problem is easy to encounter, mainly to check whether the positive and negative poles of the battery box are rusty, whether the wiring is not in poor contact, and whether the plug is loose.
Solution: The rust needs to be removed, the line is connected accurately, and the electric valve must be closed before safety inspection.
4. The micro switch is damaged.
This is a very small area in the gas stove, but it is more difficult to repair than the usual fault, and it is generally not recommended to repair it yourself.
-
There are roughly two reasons, 1 is that the gas stove battery or electronics are out of power, 2 is that the gas hole is blocked, how to wash it here will not be said, everyone will!
-
The gas stove is a kitchen appliance that we use every day, and there are several reasons why the gas stove cannot be ignited:
1. The battery is not lit is also the reason why the gas stove does not ignite, and there is also the poor contact that makes the pulse igniter unable to ignite. Therefore, if the gas stove does not ignite, do not worry, and carefully rule out relevant factors. 2. The reason why the gas stove does not ignite is that the distance between the contact needles of the pulse igniter is too large or the contact needles are covered with dirt, so that the ignition cannot be ignited.
3. The gas or pressure reducing valve is faulty, resulting in too little air pressure. If this is the case, you can change the pressure reducing valve to get a good solution. 4. The reason why the gas stove does not ignite should not be underestimated, the gas pipe is blocked and the gas supply is not smooth, resulting in the gas stove not ignition.
5. The ignition switch is faulty (the two electrodes under the button are blocked by dirt and affect the power supply).6. The reason why the gas stove does not ignite is that the nozzle is blocked. Therefore, it is necessary to clean up the water droplets, oil stains, rust spots, etc. on the stove in time to look beautiful and make the stove last longer.
-
If the gas stove does not catch fire, the gas tank is out of gas, and the gas tank needs to be replaced in time;
If the gas stove has no electricity, it will also cause the ignition to fail, so the gas stove battery needs to be replaced;
If the circuit is not in good contact, it will also cause the gas to be ignited, so it is necessary to inspect the circuit and deal with it accordingly.
-
If there is no gas, we can call the gas company ** to deliver gas or go to the gas business hall or bank to go through the gas recharge procedures. Some gas stoves are using pulse ignition, it generally uses the battery as the power source, if the battery is not charged, it cannot be ignited, if the battery is out of power, you can open the battery cover at the bottom of the gas hood and replace the new battery.
2. The failure of the gas stove may be due to the failure of the gas stove, such as the damage of the discharge needle, valve body, high-voltage wire, microswitch, etc., you can contact professionals for maintenance. The gas stove can not be ignited or it may be because the gas passage is blocked, we can check whether the gas release valve has a gas smell, if there is a pipe blocked, the owner can ask professionals to dredge, and their own dredging may cause the gas pipeline to be poorly sealed.
3. The gas stove at home has not been cleaned for a long time, and the oil stain has blocked the nozzle hole, which may also cause the gas pipeline to not catch fire. If the gas stove at home can be ignited, but the flame will be extinguished after a while, it may be caused by the gas stove damper being too large.
-
1. First of all, if we try several times and still don't start the fire, then it may be because the gas used by the gas stove is exhausted;
2. Nowadays, many gas stove ignition devices are powered by batteries, if the battery is dead, it is normal that it cannot catch fire;
3. There may be a reason why the fire cannot be ignited, the pipe for transporting gas is blocked by dirty things.
-
Hello, 1. The battery is dead or insufficient, the ignition needle is damaged, etc. 2. Flameout protection devices such as thermocouples or ion induction needles and solenoid valves are damaged. If the thermocouple or ion sensing needle is not in sufficient contact with the flame, it is easy to cause the stove knob to go out after it is released.
For cooktops with thermocouple + solenoid valve flameout protection device, when ignition, it is necessary to rotate the cooker knob 90 degrees counterclockwise, and at the same time press the knob to make the bottom, while holding it for 3-5 seconds to ensure that the solenoid valve is fully engaged. 3. The fire cover is not placed well or the fire hole is blocked, and the damper of the stove head is not adjusted to the best state. If the air source does not match, it is necessary to check the nameplate label on the product body.
4. There is a foreign matter blocking inside the stove head (it needs to be cleaned or replaced by a professional maintenance technician).
-
Causes and treatment methods for gas stoves that do not catch fire.
-
Hello dear, the gas stove can't catch fire, solve 1, first check whether the gas source switch is open, the bottled gas is out of gas, you have to add gas. The gas stove does not catch fire, solve 2, check whether the connecting hose is flattened or bent, if it is not flattened or bent, then, finally, pick up the pot rack and see if there is a fire at the ignition nozzle. The gas stove can not catch fire, solve the problem of 3, pipeline blockage, this is a very common problem, once the pipeline is blocked, it is necessary to check the gas valve, generally speaking, you can smell the smell of gas and the stove can not catch fire, it is likely to be gas blockage.
If the gas stove pipe is blocked, then the pipe should be unblocked or replaced. The gas stove can't catch fire, and the problem is solved by 4. Poor circuit contact, which is a problem that is easy to ignore, but it is often seen in many old users, mainly to check whether the positive and negative poles of the battery box are rusty, and whether the line has poor contact. If the gas stove circuit is not in good contact, the rust needs to be removed and the wiring should be connected accurately.
-
One of the reasons: the battery is insufficient, the phenomenon of two burning eyes at the same time suddenly can not ignite, follow the line of the lighter, on the opposite side of the lighter switch (near the wall) is easy to find a No. 1 battery, replace the battery. Reason 2:
The phenomenon is that the burner eye that is often used on the outside does not catch fire, as long as the detachable eye burner is cleaned with toothpicks and other items, and rinsed with water. (Cooking spills are treated in the same way and dealt with in a timely manner). Reason 3:
Rust clogging the burning eye, the phenomenon is that the burning eye that is not often used on the inside can not catch fire, the detachable part must be cleaned with a toothpick, the stove buckle is turned over and tapped, and the rust can be poured out.
-
The problems of the gas stove not igniting are the low battery power of the gas stove and the failure of the gas stove itself.
1. The battery of the gas stove is low.
At present, gas stoves are all electronic pulse ignition, when the battery is insufficient and cannot produce electric sparks normally, it will not be able to ignite, which everyone may know. However, there is another situation, that is, when the battery power of the gas stove is relatively low, it can still make an electric spark, but the gas stove cannot ignite.
In fact, this is because the battery of the gas stove is low, which is not enough to open the solenoid valve of the gas stove, so it cannot ignite, which is also a puzzling, and there is indeed a relatively common reason why the gas stove cannot ignite.
2. The gas stove itself is faulty.
The gas stove itself may malfunction, or it may not catch fire. One of the more common reasons for this is that there is a problem with the automatic flame-out protection device of the gas stove. For example, the probe of the automatic flame-out protection device is dirty, and the probe connection section is falsely connected.
There are also reasons such as the blockage of the fire hole at the probe of the gas stove head. Of course, there are also gas stoves that have damaged ignition systems, solenoid valves that are stuck, ignition switches that are faulty, etc., but they are not common.
Precautions for the use of gas stoves
1. First of all, you must be clear about the gas source used in your home. Clarify the gas source, after installation, please read the product manual carefully before using the gas cooker.
2. Be sure to buy a gas stove with an automatic flame-out protection device.
3. If the stove is used in a hurry, if you find that the fire is off, you should turn off the switch immediately. Open doors and windows for ventilation, and when there is no smell of gas, find out the cause of extinguishing the fire, and properly dispose of it before re-igniting.
4. Before stopping the use of burning socks or going to bed, check whether the gas appliance switches are all turned off.
5. If the hose connection method is used between the gas stove and the pipeline, it is necessary to check whether the hose is damaged and aged and whether there is air leakage. The method is to apply soap, and the air leakage point is the place where the bubbles are blown continuously.
6. It is strictly forbidden to install gas meters and stoves in the bedroom, nor can they sleep in the kitchen equipped with gas facilities. In addition, do not pile up sundries and flammable and explosive materials near the gas stove to prevent fire and accidents.
-
1. In this case, it may be that the gas in the gas stove has been used up. 2. The battery in the gas stove has no electricity or the battery is short-circuited due to rust inside the battery box, which will lead to the problem that the gas stove does not ignite. 3. There is a specified pressure in the gas stove, and once it is exceeded, it will not be able to start.
4. It is also possible that the gas outlet valve of the pipeline is blocked by foreign objects, which causes the coal mountain to be gasless and the stove is not ignited. 5. The ignition of the gas stove, the micro switch under the knob, or other parts are faulty.
Suggested workaround:
1. First of all, you need to check whether the gas in the gas stove has been used up, if it is used up, then you need to replenish sufficient gas.
2. Check whether the battery in the gas stove is out of power, if there is no electricity, replace the battery with a new one, and check whether there is rust in the positive and negative electrodes inside the battery box, then the rust needs to be cleaned up, so that the problem of the gas stove not igniting can be solved.
3. Check whether the pressure inside the gas stove is exceeded, if the pressure is exceeded, then there is no way to start, at this time you need to contact professional personnel to deal with it.
4. If the gas outlet valve of the pipeline is blocked by foreign objects, then it is necessary to clean the gas outlet valve of the pipeline, or directly replace the new gas outlet valve to solve the problem of not igniting the gas stove.
-
If the gas stove does not ignite, the repair methods include opening the gas valve, opening the self-closing valve, recharging the gas, replacing the battery with the natural gas meter, wiping the stove head, re-placing the correct fire cover, and replacing the gas stove with a new battery.
1. Open the air valve.
Check that if the valve in front of the natural gas stove is not opened normally, the gas stove will naturally not be opened.
2. The self-closing valve is opened.
Gently pull out the self-closing sock valve, the self-closing valve has a logo beam before dialing out the green line, and the red line position will automatically close when ignition again.
3. Recharge gas.
If the natural gas meter is in arrears, you can quickly recharge the gas. Remember to develop a good habit of checking and recharging frequently.
4. Replace the battery of the natural gas meter.
Replace the battery for the natural watch, and the power supply can be restored and the ignition will be normal.
5. Wipe off the stove.
If the stove head or fire cover is wet with water, it will also cause the ignition to be abnormal, so wipe it with a dry rag to light the fire normally.
6. Re-position the cleaning fire cover correctly.
When the white ignition needle is discharged, but the gas cannot be ignited normally, it is generally caused by the small fire cover not being placed in place or blocked. At this point, re-position the fire cover correctly, and you can basically fire normally. If it is caused by the blockage of the small fire cover, you can use a toothpick or wire to dredge the small fire cover and clean up the foreign matter inside, and the fire can be ignited normally.
7. Replace the gas stove with a new battery.
If the white ignition needle cannot be discharged normally, then check the positive and negative electrodes of the battery box to check whether there is rust. If there is rust, you can use sandpaper or a utility knife to clean it and replace it with a new battery.
Q: Find the classification of gas stoves.
Answer: There are several classifications of household gas stoves: >>>More
Teach you why the gas stove won't catch fire.
The tempering of the gas stove, also known as "discharge", is the combustion phenomenon of the flame retracting into the inner cavity of the stove and the "deflagration" of the stove spray. >>>More
There should be a harvest, and the old gas stove can be used as a waste product**, **not expensive. >>>More
I finally figured out how to adjust the damper of the gas stove! It took 2 days to get it done! It's actually quite simple! I started reading a lot on the Internet, but I didn't understand it! The reason is that there is no picture, it is really hard to say, let me try! >>>More