-
Anonymous users2024-02-11Manual settings: China Mobile MMS settings.
MMS Parameter Settings:
Connection name: China Mobile MMS (GPRS).
Data bearer mode: GPRS
Access point name: CMWAP
Identification: Normal.
Connection Security: Off.
Connection Type: Permanent.
GPRS Settings:
First, make sure that the WAP browser is set up.
1. Homepage: such as China Mobile homepage:
3. Gateway port number: ordinary 9201
4. Timeout limit: 600 is recommended
Make sure that the GPRS data type is set in your phone.
1. APN Setting: CMWAP
2. Username setting: empty.
3. User password setting: empty.
4. Be sure to go to the mobile company to open GPRS business (you can open free**).
-
Anonymous users2024-02-10Is it using a Unicom card?,Unicom can't send MMS.。
Is there any GPRS activated?
-
Anonymous users2024-02-09Unicom is not allowed to send MMS.
Mobile support! If you move, call 10086 and pick up the human service! Ask her and she'll tell you how to set it up.
-
Anonymous users2024-02-08The guy upstairs said that my V3i is a Hong Kong bank, surfing the Internet, and there is no problem with sending MMS.
You go directly to the mobile business hall and ask the person there to set it up for you. You may not be able to figure it out yourself.
-
Anonymous users2024-02-07Network-Account: Casual Homepage:
The wap** that you know yourself can also do).
Username and password: Ignore it.
Use Preferred Access Point: Cancel.
Access Point Settings -**: Start.
Port: 80 Transmission mode: packet data.
Transmission Mode Settings - Packet Data Access Point: CMWAP
Don't worry about anything else!
MMS: Home:
Username and password: Ignore it.
Use Preferred Access Point: Cancel.
Access Point Settings -**: Start.
Port: 80 Transmission mode: packet data.
Transmission Mode Settings - Packet Data Access Point: CMWAP
Don't worry about anything else!
-
Anonymous users2024-02-06It's not to hit you, Hong Kong is a parallel trade from the mainland!! I can't get on the Chinese mainland WAP network, even if I open GPRS, it's useless, I can't send MMS!!
-
Anonymous users2024-02-051.Go to Access the Network - > Web Settings - > new entry.
2.Name: Mobile MMS.
3.Home: GPRS on your phone, set to:
4.Service type: WAP
5.Gateway: 6Port: 9201
7.Domain Name: Not specified.
8.Service type 2 and below do not need to be changed.
9.Then pull to Super-Advance: 15 minutes or less.
10.Dial-up connection: 17266
11.Username: wap
12.Password: WAP
13.Pull down again.
Access point name: CMWAP
The above is to set the parameters of MMS, use the same method to build a parameter for using a mobile phone to access the Internet, and change it within ()!
To add that after the above is set, you have to go to the information to set 1Go to the middle key (menu key) at the top of the information point
2.Select Info Settings.
3.Multi-information settings.
4.Find the last item: Server Information:
5.Here is not to see that there are 3 options! Select the first inverted color, press the middle menu key, 6Choose.
7.Service: You can write any (my write mobile MMS)8Server:
9.Set the name of the web page: After entering, see if there is a mobile MMS just set up in the network, just select it!
10.The screen returns to the server information and presses Done, and when the screen is finished, it returns to the current server, and Mobile MMS is selected.
-
Anonymous users2024-02-04Network-Account: Casual Homepage:
The wap** that you know yourself can also do).
Username and password: Ignore it.
Use Preferred Access Point: Cancel.
Access Point Settings -**: Start.
Port: 80 Transmission mode: packet data.
Transmission Mode Settings - Packet Data Access Point: CMWAP
Don't worry about anything else!
MMS: Home:
Username and password: Ignore it.
Use Preferred Access Point: Cancel.
Access Point Settings -**: Start.
Port: 80 Transmission mode: packet data.
Transmission Mode Settings - Packet Data Access Point: CMWAP
Don't worry about anything else!
-
Anonymous users2024-02-03Set it up as above.
If you don't understand it, you can go to the mobile self-run business hall and ask them to set it up for you.
Weakly ask, have you opened the MMS service?
Call 10086 and ask.
-
Anonymous users2024-02-02The color is also set up, and you will set it up, and you will not take it to the business hall and ask the waiter to help you set it up!
-
Anonymous users2024-02-01I don't have any money for my phone! Or someone changed your information center number for you! Or call the customer service ** to ask, I used to have this problem! After playing **, it will be fine after more than 1 hour!
-
Anonymous users2024-01-31There are two steps:
Step 1: Activate the GPRS function (business hall) and set it up.
GPRS Settings:
1.Go to Access the Web - > Web Settings - > a new entry (or your existing one)2Name: Monternets.
3.Homepage: http: wap
4.Service type: WAP
5.Gateway: 6Port: 9201
7.Domain Name: Not specified.
8.Dial-up connection: 17266
9.Username: wap
10.Password: WAP
Access point name: CMWAP
Step 2: MMS settings.
MMS Message Settings:
1.Access to the Internet" Web Settings" new entry.
2.Name: Mobile MMS.
3.Home: 4Service type: WAP
5.Gateway: 6Port: 9201
7.Domain Name: Not specified.
8.Dial-up connection: 17266
9.Username: wap
10.Password: WAP
Access point name: CMWAP
After the above is set, you have to enter the information to set the information "middle function key" "select information settings" "multi** information settings" "server information" select the first inverted "middle function key".
1.Service: Mobile MMS or your preferred name.
2.Server:
3.Web page settings: Select the mobile MMS 4Finish.
5.Select Mobile MMS in the current server page that is returned.
-
Anonymous users2024-01-30It is very troublesome, it is recommended that you go to the telecom business hall to find a professional to set up.
-
Anonymous users2024-01-29To send MMS, you must first enable the GPRS function and set the correct MMS access point, and the size of the MMS file cannot exceed 100K
-
Anonymous users2024-01-28I'm using, in fact, this is simple, call**Ask Unicom or mobile customer service, tell him the phone model, and he will tell you the specific setting methods and parameters.
-
Anonymous users2024-01-27I've had the same problem as you before.
Turn on your phone.
1.Go to Access the Web - > Web Settings - > a new entry (or your existing one)2Name: Monternets.
3.Homepage: http: wap
4.Service type: WAP
5.Gateway: 6Port: 9201
7.Domain Name: Not specified.
8.Dial-up connection: 17266
9.Username: wap
10.Password: WAP
Access point name: CMWAP
Step 2: MMS settings.
MMS Message Settings:
1.Access to the Internet" Web Settings" new entry.
2.Name: Mobile MMS.
3.Home: 4Service type: WAP
5.Gateway: 6Port: 9201
7.Domain Name: Not specified.
8.Dial-up connection: 17266
9.Username: wap
10.Password: WAP
Access point name: CMWAP
After the above is set, you have to enter the information to set the information "middle function key" "select information settings" "multi** information settings" "server information" select the first inverted "middle function key".
1.Service: Mobile MMS or your preferred name.
2.Server:
3.Web page settings: Select the mobile MMS 4Finish.
5.Select Mobile MMS in the current server page that is returned.
-
Anonymous users2024-01-26V3i is a parallel import! Need to change the Internet settings on your phone, you can go.
If you really don't understand it, you can call 1860 directly to find manual services.
-
Anonymous users2024-01-25From the mobile phone menu: Access the network -- >> Web page settings "New Entry" Name: You can enter the name of the homepage of your choice.
Service type 1: WAP
Gateway IP 1:
Port 1: 9201
Domain name 1: You can leave it unentered.
Service type 2: WAP
Gateway IP2: Can be left unentered.
Port 2: You can leave it unentered.
Domain name 2: You can leave it unentered.
dns1: This input can be omitted.
dns2: This parameter can be omitted.
Timeout: You can set it yourself.
Dial-up connection 1: 17266
Username 1: wap
Password 1: WAP
Rate 1: 9600
Line Type 1: Modem.
Dial-up connection 2: Not required.
Username 2: Not required.
Password 2: Not required.
Rate 2: This field is not required.
Line type 2: This field is not required.
GPRS APN: CMWAP -- SIM card supports GPRS, you need to fill in this user name: not required.
Password: Not required.
-
Anonymous users2024-01-24Name: China Mobile MMS (GPRS).
MMS Center**.
WAP gateway.
Port: 9201
That's fine, you try. No, look for me.
-
Anonymous users2024-01-23Access the network - web page setting - press the entry key at Monternet to set - name: Monternet.
Homepage: Service Type 1: WAP
Server 1: Empty.
Port 1: 9201
Domain name 1: Empty
Service type 2: WAP
Server 2: Empty.
Port 2: Empty.
DNS1 and 2 are both.
Timeout: 10 minutes.
Dial-up connection 1: 17266
You don't need to write a username or password.
Rate 1: 9600
Line Type 1: Modem.
The 2 in the back is the same as the front.
GPRS access point name: CMWAP
You don't need to write your username or password.
-
Anonymous users2024-01-22The GPRS you opened is in the province, if it is in the province, of course you can't get on the Internet when you go to other provinces.
V3i has a dark red one, the keyboard is metal color, there is no paint, I have also seen the paint peeling off the license, the reason is that there are too many handmen, and the water is liquid (Hong Kong licensed) and fake water (second-hand refurbished). Generally, the paint will not fall off when the water is running. In addition, it is pure parallel goods (only the fuselage is produced abroad and smuggled into China, other batteries, back covers, chargers, and packaging boxes and headphones are all saved in China, and the fuselage is re-brushed in China). >>>More
To put it simply, the V3IE external screen has been increased from STN to TFT and Edge has been added to the network standard. In addition to these changes, V3ie improves on the shortcomings of the previous V3i that it could not be used in memory cards, making it more convenient to use.
I'm going to buy it on May Day.
V3 external sound is OK!
Occasionally, there will be a broken sound. >>>More
1. Since MMS is sent and received in the form of data traffic, please confirm that you have turned on the mobile data service network switch, and enter "Settings--Wireless and Network--Mobile Network--Access Point Name" to select the access point to the WAP access point, and check whether the MMS access point exists correctly, if you are not recommended to add it yourself, you can consult the operator's customer service (mobile customer service**: 10086; China Unicom customer service**: 10010; Telecom Customer Service**: >>>More