What should I do if my phone falls in the water, what should I do if my phone falls in the water?

Updated on number 2024-06-04
9 answers
  1. Anonymous users2024-02-11

    The method of salvaging the mobile phone falling into the deep water is as follows:

    1. If the water depth requires magnets and ropes. Place the magnet on a rope and place it within range of the phone in the river, try to move the magnet gently and horizontally, and when the weight increases, scoop up the magnet and the phone.

    2. If you can swim, you can go into the water to find it.

    3. You can also try to salvage with a copying net.

    How to deal with the phone falling into the water:

    1. Fish out your phone.

    The longer the phone is immersed in water, the larger the water area of the mobile phone, and the greater the damage to the phone's earpiece, buttons, screen and motherboard.

    2. Dry your phone.

    After taking out the mobile phone, wipe the water on the surface first, do not turn on the phone at this time, because the water is likely to have penetrated into the inside of the mobile phone, once it is not cleaned up, it will cause the injection plate to burn if it is powered on again.

    3. Remove the battery.

    Regardless of whether the mobile phone is turned on or off, if the battery can be removed, try to remove the battery first, and if you can't remove it, don't forcibly disassemble it.

    4. Blow dry your phone.

    Take out the hair dryer and blow it slowly on the water area of the phone, keeping the cold air as much as possible, and the temperature of the blow is not too high, because the high temperature of the hair dryer is likely to cause devastating damage to the sensitive components inside the phone.

    5. Drying treatment.

    In the case that the water ingress of the mobile phone is not serious, the water can be removed with desiccant and a drying box. If the motherboard is damaged after the phone is flooded, it is recommended to contact a professional repair technician to avoid further losses. <>

  2. Anonymous users2024-02-10

    If you are using a vivo mobile phone, the liquid inlet treatment method of the mobile phone:

    1. Shut down immediately and take out the SIM card and SD card; Do not force it on, it is very likely to cause a short circuit.

    2. Lay the fuselage flat, use a paper towel or a soft crack cloth to absorb water, and try to suck out the water in the gaps; Try not to move your phone when absorbing water.

    3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

    4. Stand in a ventilated and dry place, and place it with the screen facing up and the front camera tilting upward;

    5. Bring your mobile phone to the vivo customer service center as soon as possible and let the maintenance engineer conduct professional testing. (Customer service Huaicong center address: enter vivo official website vivo**app--my--service outlets--after-sales outlets--select provinces and cities to inquire about the address of the customer service center) It is recommended to call the customer service center in advance to confirm relevant matters and understand the working hours, so as not to delay precious time.

  3. Anonymous users2024-02-09

    1. First of all, the mobile phone is placed in a ventilated place for ventilation for about 24 hours, so that the moisture in our mobile phone can be volatilized, so the mobile phone cannot be opened immediately after falling into the water.

    2. After the mobile phone is placed in water for a day, it is best to blow it with a hair dryer, after determining the volatilization of water, open the mobile phone to see if it can be turned on.

    3. If you can turn it on, you can make a call** can be connected and used normally, there will be no problem, if you can't connect **, it is likely that there is a problem with the mobile phone chip and hardware.

  4. Anonymous users2024-02-08

    It usually takes 2-3 days to air dry, but if you put it in rice or use a hair dryer, it can be dried within 1 day.

    For mobile phones that have just fallen into the water, there are the following measures to minimize the damage:

    First of all, when you accidentally find that your mobile phone is in water, you should pick it up immediately, the longer the mobile phone is soaked in water, the greater the damage, so you should not hesitate to pick up your mobile phone if you find that your mobile phone is in water.

    After picking up your phone, don't do any keystrokes on your phone, especially if it's a touchscreen smartphone. You should carefully remove the back cover of the mobile phone battery, peel off the mobile phone battery, and power off the mobile phone.

    After the power is off, you can carefully wipe it with a dry cloth to wipe off the external water droplets before proceeding to the next step. Please note that you should never use a hair dryer to dry your phone, otherwise, the high temperature and scorching heat may cause devastating damage to the sensitive components inside the phone.

    Next, put the externally dried phone into an airtight container, wrap some plastic bags on the outside, and use rice to fill the container completely, so that the phone is submerged in the container, and it is better to leave it for 1 or 2 months. In general, if possible, put in desiccant for better results.

    After a month, take out your phone, install the battery, and try to turn it on. If it can be turned on successfully, then the phone can be used normally, if it can't be turned on, then it is very sad and can only consider buying a new phone.

    Although the above measures can remedy the damage, it is best not to carelessly drop the phone into the water. Avoid unnecessary losses.

  5. Anonymous users2024-02-07

    1. Rapid salvage.

    If the phone falls into the water, you need to salvage it immediately, wipe it clean with clean toilet paper or cloth, and place the motherboard facing up during the wiping process to avoid a large amount of moisture flowing into the inside of the phone.

    2. It is forbidden to turn on the machine.

    Although the moisture on the surface of the mobile phone is wiped dry, there is still moisture in the host, and if it is turned on immediately, the motherboard of the mobile phone will be burned, so the mobile phone should not be turned on immediately when it is fished out.

    3. Drying treatment.

    Turn on the hot and cold air settings alternately on the hair dryer, align the opening of the mobile phone, such as the charging port, headphone jack, SIM card slot, etc., and blow it several times to evaporate the water inside the mobile phone, and then put it into the rice to dry it again.

    4. Try to turn it on.

    After doing the above steps, you can try to turn on the phone, check whether the buttons of the mobile phone, fingerprint recognition, screen touch, mobile phone speakers, etc. are normal, if normal, you can use it normally, if it is not normal, it needs to be repaired.

  6. Anonymous users2024-02-06

    I believe that many friends will put the water into the water after the mobile phone in the box, and then use rice to spread it, wait for 12 hours, we can go to buy a new mobile phone, who told you that the mobile phone into the water with rice? That's because unscrupulous traders want to sell more mobile phones, so they taught you to do it.

    Let me teach you some correct methods, and you must not believe these rumors. The water ingress of the mobile phone is mild and moderately waterlogged.

    Mild water ingress solution: Mild water accumulation means that after your phone falls into the water, it is fished out within five seconds and the phone is turned on. We only need to use a paper towel to absorb the water on its surface, and then use a cotton swab to absorb its charging port, as well as the water in the earpiece, at this time the phone is turned on, we must not touch it, we put it in a ventilated place for two hours.

    If the phone does not enter the shutdown state by itself, then we can carefully test all aspects of the phone's functions, and then try to record**, to see if he is hot, if the phone is not hot, it means that there is no water in the phone, and you can use it with confidence.

    Solution to heavy water ingress: When our mobile phone is heavily flooded, the mobile phone is turned off or restarts all the time, or the mobile phone obviously feels abnormal. In this case, we must not shake the phone too hard, because if you shake the phone, the water droplets will spread to the CPU, and the phone will not be saved.

    In addition, don't put it in this rice, the moisture in the mobile phone can't be made at all, and the dust of that rice will also put the earpiece and the speaker.

    Plug it, so that the moisture will not be able to escape, causing your mobile phone parts to corrode, so that your mobile phone is more difficult to repair.

    The correct way to deal with it is to gently pick up the phone, if it is automatically turned off, I don't care, if he is not turned off, we need to manually shut down, do not take the initiative to charge, and then according to the above, we wipe the surface water dry, and then we send it to the maintenance master as soon as possible; We don't have the conditions to send it to the maintenance master, we can use the hair dryer at home to turn on the hot air.

    Then turn on the minimum wind speed, put it on the phone, bake slowly, bake for at least two hours, and after the phone is completely dry, we try to turn it on, if it still can't be turned on, we send it to the maintenance master as soon as possible.

  7. Anonymous users2024-02-05

    Precautions. One: Don't force it on or off.

    After the mobile phone is flooded, the whole mobile phone may become a conductor, and pressing any button at this moment may cause the mobile phone to short circuit.

    Two: Don't shake your phone too hard.

    Many people want to shake the phone vigorously to shake the water off after "rescuing" the mobile phone that has fallen into the water, but it is this action that may allow the water to enter the mobile phone.

    Three: Don't heat your phone.

    The hot windshield of the hair dryer and the oven are extremely susceptible to the breakdown of some components in the phone.

    Rescue method: The first step is to quickly get the phone out of the water.

    Step 2, most mobile phones on the market are not detachable, if your phone can't be disassembled, skip this step immediately to the third step. If it can be removed, remove the battery immediately. Do not press any keys, do not turn off, directly remove the battery, if you operate the mobile phone at this time, it is easy to cause a short circuit in the internal components, and even further cause the components to burn out or the battery**.

    The SIM card and SD memory card should also be removed to avoid data loss.

    3 The third step, suck, remove the moisture on the surface of the mobile phone as soon as possible, it is very simple, quickly wipe it with a clean towel, and with the help of toilet paper, vacuum cleaner and other tools, suck out the water in the cracks of the mobile phone, make sure that the water does not flow into the charging port, headphone jack, etc.

    Step 4: Dry, with the help of hair dryers and other tools, pay attention to be sure to choose the "cold air" mode, and keep the hair dryer and the mobile phone away when blowing to avoid damage to the mobile phone. The main position of the blowing is concentrated in the opening part, such as the charging port, headphone hole, earpiece, speaker, etc.

    This is followed by 24-48 hours of ventilation and drying. Here is an introduction to a "artifact" that every family has, that is, rice. That's right, putting your phone in a dry rice bag works wonders, leaving it quietly for 24 to 36 hours, and waiting for your phone to be as good as new again!

  8. Anonymous users2024-02-04

    Turn off, and then shake it hard, try to throw the water out of the earphones or charging hole, shake it almost with a hair dryer and start blowing it, blow it for a while, repeat it several times, after it's over, enlarge the phone in a rice bag or wrap it in toilet paper and wrap it with tape, and then say it after a while, it's good, it's good, if it's not good, send it for repair. . .

  9. Anonymous users2024-02-03

    Quickly get your phone out, and remember that the shorter the time your phone falls into the water, the more hope there is for survival.

    Shut down the phone immediately after removing it and pull out the battery, which is to prevent further damage to the circuit board.

    To dry, if the back cover of the phone can be opened, then to remove the SIM card SD card battery, you can use a soft cloth or cotton swab to erase some obvious water stains.

    Remember not to try to dry it with a hair dryer, as hot air may accelerate the damage to the internal components of your phone.

    Put the phone in rice or silica gel desiccant, the rice can effectively absorb water, in order to ensure that the moisture is completely removed, it is best to leave it for about three days.

Related questions
13 answers2024-06-04

Nothing useful!

I'll sue you, I've broken n thermometers, hehe. >>>More

11 answers2024-06-04

Hello: According to your description, because seawater will erode electronic components, in order to avoid secondary damage to your mobile phone, it is recommended to remove the battery, SIM card, SD card, contact Samsung service center for testing, service center specific address and contact**Please refer to the following link: (It is recommended that you contact the service center before going).

16 answers2024-06-04

If you are using a vivo mobile phone and lose your phone, you can try the following methods: >>>More

12 answers2024-06-04

After the mobile phone is dropped in water, the water may enter the circuit board and cause a short circuit in the mobile phone circuit, which will affect the use or even be scrapped. Therefore, the phone should be removed from the water as quickly as possible after entering the water, and be careful not to cause the phone to produce a large acceleration, because this is likely to cause the water to enter the circuit board along the gap. After removing from the water, quickly open the battery cover and remove the battery, that is, cut off the power supply to avoid a short circuit. >>>More

13 answers2024-06-04

How to solve the problem of mobile phone heating.