Can pipe unclogging agents be used to unclog toilets?

In general, it is possible, and the [Ping An Chase] I use can be dredged, and it will not damage the toilet or anything, but has the effect of maintenance.

What is the effect of pipe dredging agent?

How to use toilet unclogging agent.

1. The toilet is clogged and the water is very slow.

2. Pour a bottle into the inlet position, and then add about 1 kg of water to make the product fully dissolved and slowly penetrate into the blockage position.

3. When the water level is lowered, add an appropriate amount of water, push the irrigation dissolved solution to the pipe blockage, and flush it with a large amount of water after 1 hour to dredge.

Precautions for the use of toilet unclogging agent:

1. Do not directly contact** or oral, children should not enter.

2. Do not use other dredging agents and chemicals before and after using this product.

3. This product cannot be used for cleaning aluminum products.

4. When this product encounters cold water, it is safe and stable. If it encounters a high water temperature, it will react violently, and the dissolution ability and temperature will increase rapidly, so please pay attention to safety and do a good job of protection to prevent splashing.

5. Because this product can continue to act on blockages, please wait patiently after use.

6. Please use the dredging agent in a well-ventilated environment. Strong dredging agent, urine alkali melting agent, and cement dissolving agent will coagulate when used with each other due to different formulas, so it is strongly recommended that customers use each product three days after use before using another one to prevent interaction with each other.

Toilet bowl unclogging agent is still useful because it can remove food debris or blockages that are blocked in the toilet, that is, it can be removed by chemical means. For example:

1. Although the toilet dredging agent is a new type of bathroom toilet dredging product, it is particularly effective for partial blockage, so it is still more useful, and the blockage and dredging effect caused by organic matter such as oil, hair, vegetable residue and so on inside the toilet bowl is very good.

2. The specific use method of toilet dredging agent first needs to wash the surface of the toilet bowl, and then open a package of toilet dredging agent, pour all of it into the drainage pipe of the toilet, and let the medicinal properties of the toilet dredge volatilize freely.

Then I put about 400ml of 40 60 water into it, and the effect is also very good. Usually after 30 minutes, we need to use a lot of cold water to rinse down the pipe.

3. It is necessary to use dredging agent in a well-ventilated environment. Strong dredging agents, urine alkali melting agents, and cement dissolving agents will coagulate when used with different formulas.

Therefore, it is strongly recommended that customers use each product three days apart before using the other to avoid chemical interaction between them.

The toilet is clogged, and the most commonly used should be the leather picker, which is very convenient to use. Just add water to the toilet, then press the leather bowl at the toilet mouth, as long as you hear a 'coo', it is clear;If it doesn't work, add some water and make it like this, which can generally be solved.

If the clogged toilet is due to hair, you can use a hook made of wire to reach into the sewer mouth and stir it to make the dirt wrap around the wire, and then pull out the wire to drag the dirt out of the sewer mouth.

If it is because of a slight blockage, such as a blockage caused by toilet paper, you can choose to use a toilet dispenser, which is a tool specially invented for pipe blockage dredging, the front end of the toilet is a flexible spring, according to the height of the blockage from the toilet mouth to determine the spring length, after tightening the screw, press the spring to the pipe until the dredge or take out the dirt.

If it is because of oil, hair, or vegetable leaves and food waste, you can use pipe dredging agent, which is a powdered dredging product that can be used for any pipe dredging, the dredging agent is put into about 50 grams each time in three amounts, with an interval of 1-3 minutes, and after all the input is completed, stay for three minutes to flush into the hot water, and finally stay for 10 minutes, rinse with clean water, so that after the operation, it can generally play the role of toilet dredging.

If you really can't find any tools, another way is to use tape, the kind of wide tape to seal the toilet bowl (first wipe the water marks next to it), and stick it tightly, so that it does not leak. Press the flush switch after making sure it is sealed, because the middle part of the tape will bulge out due to the air, and press it down with your hand. It's almost all right.

1. Take about 40 grams of dredging agent, which is the amount of one bottle cap we call it, and then prepare an appropriate amount of tap water, about twice as much as the dredging agent, and divide it separately, without mixing it.

2. After putting the dredging agent into the pipe, continue to fill in the water.

3. Wait for 5-10 minutes to observe the dredging effect, if it has not been dredged, continue the second operation, but wait at least 30 minutes between the two operations.

4. If plastic pipes are used, it must be taken into account that heat will be generated during use, and too many quantities are added at one time, which may cause thermal deformation of the pipe due to instantaneous high temperature. Therefore, the principle of "small number many times" should be followed. When the amount of use does not exceed 40 grams and the water temperature does not exceed 30 degrees, the interval between each use should exceed 30 minutes to avoid the deformation of the pipe.

In fact, it is best to pull the plastic hose out of the floor drain and clean the floor drain pipe directly.

Ask where you can buy unclogging agents.

Pipe unclogging agents can unclog toilets. Pipe dredging agent can pass the toilet, but it needs to be determined according to the nature of the blockage, this dredging agent can play a certain dredging role in soft blockages, but it can not play a dredging role in hard blockages. Therefore, before using a pipe unclogging agent, it is necessary to find out the cause of the clogged toilet, and then choose the appropriate unclogging method according to the cause.

Precautions for unclogging toilets1. It should be noted that some pipeline dredging agents are very corrosive, and rubber gloves must be worn when using, and they need to be fused with water to play a role.

2. If there is too much water, it will also dilute the dredging agent and prolong the action time of the pipeline dredging agent, reduce the use effect of the pipeline dredging agent or even invalidate.

3. It cannot be an aluminum pipe.

4. It must be pipeline water seepage, and it will not work if there is no water seepage.

The above content refers to Encyclopedia - Pipeline Dredging Agent.

Pour a bottle of dredging agent into the toilet, then add about 1 kg of water, so that the dredging agent is fully dissolved and slowly penetrate into the blockage position, when the water level is lowered, then add an appropriate amount of water, push the dredging agent dissolved solution to the pipe blockage position, and flush it with a large amount of water after 1 hour to dredge.

Pipe dredging agent is a kind of chemical cleaning products that can dredge the blockage of kitchen and toilet pipes, with high concentration alkaline, and can quickly and effectively decompose and dredge various organic matter (hair, vegetable residue, meat, cotton, etc.) in the blocked sewer pipes. It can quickly and effectively decompose and dredge all kinds of organic matter (hair, vegetable residue, meat, cotton, etc.) in the blocked sewer pipes.

The strong pipeline dredging agent has a high concentration of alkaline and a low-temperature reactive type (it can fully dissolve the blockage at room temperature and will not condense with cooling and cooling).

Hello dear! Toilet blockage can be decided with a water pipe unclogging agent, which can play a certain role in dredging soft blockages, but cannot be used to unclog hard blockages. Therefore, before using the pipe dredging agent, it is necessary to find out the cause of the toilet blockage, and then choose the appropriate dredging method according to the original sand rock cause.

Hopefully, this service will help you <>

<> you can click on my avatar to turn off the collapse and tremble to note me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Wishing you well; Have a good life and all the best! If you are satisfied with my service, please give a thumbs up<>

Once again, I wish you all the best! Peace and joy.

Pipe unclogging agents can be used to drain toilets, but depending on the nature of the blockage.

When using a pipe dredging agent to unclog a pipe, you need to be patient, because the pipe will not be unclogged immediately after use, and it will take a certain amount of time to volatilize its effect. In addition, when using this dredging agent, be sure to maintain the ventilation of the surrounding environment.