How to change the mop head, how to change the mop head

Use a screwdriver to remove the four screws from the cotton mop. At this time, the mop head is loose, just take off the old sponge mop head, and this mop head will be discarded.

Mop, also known as a floor rag, refers to a long-handled cleaning tool for scrubbing the ground, and also refers to a long-handled cleaning tool in general. The mop should originate from a rag. In the most traditional mop, a bundle of strips of cloth is tied to one end of a long wooden pole.

Simple and inexpensive. The working head has been changed from a rag block to a bunch of cloth strips, which has a strong decontamination ability.

The sponge mop is used to mop the floor very well, it is clean and very convenient to clean, but the sponge mop head should be replaced frequently, otherwise there will be a peculiar smell, and there will be bacteria breeding, so how to replace the sponge mop head? Let's take a look.

How it works: Because the specifications of the sponge mop are not the same, some are longer and some are shorter, so when buying the sponge mop head, you must buy it according to the specifications, otherwise there is no way to replace it if it is big or small.

Find a screwdriver and remove the four screws on the sponge mop, there are only four Phillips screws on the sponge mop, and after removing it, the old sponge will fall off.

Remove the sponge that has fallen off, this must not be used anymore, there are both odors and many bacteria, just throw it away, and then put it in water to clean it.

Put the new sponge directly into it, and put the screws on it

The mop is a tool that every household must use when cleaning, and it is easy to use and clean, but the mop head will become dirty and hard after a long time, and the mop will seriously affect the cleanliness of the ground with such a mop. At this time, the mop head needs to be replaced, so how to change the mop head?

There are various styles of mops. The most common are rotary mops, folded heba mops and roller glued mops. These types of mops are constructed differently.

The rotating mop holds the mop head in place through a disc. The roller mop is fixed with screws to fix the cotton head with screw punch wire. The structure of the folded mop is also very different from the previous two, and its cotton head is inserted into the card slot.

How to change the mop head, the specific way is as follows. When replacing the mop head of the rotating mop, you need to step on the mop with your foot, and rotate the direction of the screw at the bottom of the mop, pull the mop up, you can detach, and then put on the new mop head, you only need to press down until it is sealed. When replacing the roller mop head, you only need to remove the screw and attach the cotton head.

When replacing the mop head against the mop, you only need to hold the mop and push the mop head back to make the original cotton head out of the card slot. There are many types of mops, and it is necessary to choose the corresponding replacement method according to different mop types.

Hello dear<>

Glad to answer for you: Mop head replacement: Start by preparing a mop and a new mop head.

Place the mop flat on the ground. The mop and mop head are attached to the right so that the mop head is facing up. Slowly, then pull the mop head outward between the two arrows.

After the mop head is pulled out, the pole and mop head are separated. Finally, just press the new mop head according to the gears. Song Xiang above is my to you, I hope to help you Ye which fight, if you think my reply is good, please move your fingers to give me a five-element like<>

Preparation tool: Mop.

1. First of all, put the mop flat on the floor, step on the mop with your right foot, step on the mop, and try to get as close to the metal part as possible.

2. Hold the mop handle with your left hand and rotate the base part counterclockwise.

3. Hearing the sound of the card, the handle and head of the mop are separated.

4. Throw away the old Lingxin mop head, and rinse the handle with water after cleaning it with a steel wool ball.

5. Prepare the new mop head and lay it flat on the ground.

6. Align the mop handle with the center of the head, rotate it clockwise, and it will be safe when you hear a sound.

7. Carefully inspect the head and handle of the mop under a dry cover, and it can be used normally without gaps.

When the flat mop head is replaced, fix the position of the cotton head by hand, the fixed plate can be removed with a gentle push, reassemble the new cotton head, and finally push the fixed plate back, for the replacement of the rubber mop head, you can first remove the screw fixed in the black iron sheet, and then drag it along the direction marked by the arrow, and tighten the screw again after the replacement is completed.

When the plate core takes the mop head to replace, you can fix the middle of the cotton head with your hand, and gently push the fixing plate with the other hand, and the position of the cotton head and the potato will be removed, and then take a new cotton head, place it in the position of the mop head, and push the fixed plate back again.

Find the screw at the black iron sheet of the rubber mop head, use a tool to remove it, hold the position of the sponge head with your hand, and drag it in the direction pointed by the iron arrow, you can remove the mop head, and then place the new mop head in the opposite direction, and finally fix it with screws.

1. Ventilation placement

After the mop head is cleaned, the head position needs to be wrung out in time, the humid environment is easy to breed bacteria, and then placed in a ventilated environment to prevent odor generation, if the mop has a peculiar smell, it can be cleaned with diluted bleach, which can effectively remove the odor.

2. Tape assistance

The mop is easy to get the hair when it is used, and it is difficult to remove it in the later stage, so you can use the tape at the edge of the edge before use, and the tape can effectively stick to the hair during the use process, and the tape can be removed after the cleaning is completed.

At present, when we replace the mop head, we should also rely on the specific situation of the mop. If the mop head is cloth, at this time, we must first unscrew the screws that fix the mop cloth head directly with a screwdriver, and then the cloth on the mop potato spine head can be removed. And we need to take out the cloth on the new mop head and reinstall it.

01 Of course, when some friends change the mop head, they should prepare a particularly good mop and a new mop head at this time, and then replace it. When changing, put the mop flat on the ground directly.

02 Then we need to twist the connection between the mop and the mop head directly to the right, at this time we will find that the mop head is slowly unscrewed, but there are also some mops that are pulled directly outward.

03 Once the mop head is unscrewed, the mop head mop rod and mop head are directly separated. At this time, we can put the latest mop head back on according to the direction.

04 I have to say that you also need to pay attention to the corresponding situation when replacing the mop head. After all, the specifics of each mop are different. All we need to do is analyze the situation on a case-by-case basis, and then adopt a reasonable approach.

The mop is permanent and the mop head may be damaged, it will be a pity to throw the mop away, and there are some mops that can be replaced with the mop head, so how to change the mop head? Next, I will introduce it to you.

1. Use a screwdriver to remove the screws from the mop.

2. After removing it, take off the old sponge mop head, take it down and throw it away directly.

3. Put the new sponge mop head directly into it.

4. Tighten the screws and you're done.

The specifications of each mop head are different, some are longer and some will be shorter, so you must buy them according to the specifications when purchasing, and there is no way to replace the unsuitable mop heads.