The water on the windshield can t be clean, and the wipers can t be replaced

Hello, if the wiper blade is not clean, after replacing the wiper blade is still not clean, in this case the wiper arm is generally deformed, it is recommended to go to the repair shop to check the wiper arm, if the deformation needs to be replaced.

Hello, if the glass is not clean, it is recommended to check whether the wiper arm is not as tight as before. Adjust the wiper arm a bit, and then change to the better boneless wiper blade.

This may be a problem with the wiper rubber strip, which is not very tightly attached when installed, and the effect is not very good.

Hello, if the replacement of the new wiper is not good, just see if the wiper arm is too loose, you can bend the wiper arm hard.

Hello, it should still be that the wiper blade and the glass are not tightly fitted, it is recommended to bend the wiper arm to try it and clean the glass surface.

If this problem occurs, it may be that the original glass has an oil film, and you need to buy a special cleaning agent to wash it off.

Hello! In this case, it depends on whether the wiper strip is not firmly attached or there are oil stains on the windshield, which needs to be treated according to the specific situation.

If the new wiper still can't be cleaned, there may be oil on the glass, so you can clean it.

Hello, first of all, it is recommended to check whether there is a problem with your wiper blades? Then there's the strength of the wiper arm, and then there's your glass of water.

Then it may be that there is an oil film on the top of the car glass, you can go to the Internet to buy some oil film removal treatment agent and deal with it yourself.

If this is the case for you, it is recommended to check whether the wiper blade is aged or installed in an improper position?

Hello, if it still doesn't work to replace the new rain hanger, it is recommended that you clean the front windshield.

Hello, if it still doesn't work after replacing the wiper blades, it is recommended that you change it to check the wiper arm.

Clean the glass with a foam cleaner.

The division of labor between the parts and components of the car is very clear, and it can be said that there is no priority in terms of importance. For example, some people will think that car glass water is not important, and will choose to use tap water instead of glass water, which is obviously very undesirable. Because glass water may not be as important as engine oil and brake fluid on the surface, but for the windshield, the importance of glass water is self-evident, not only to clean the windshield, but also to lubricate, dust, antistatic, if the long-term use of tap water instead of glass water, the damage to the windshield is very large.

In addition, like the wipers of cars, many car owners may not pay much attention to them. After all, the wiper generally does not have any problems, but it may not be clean after a long time. So, what should I do if the wiper doesn't scrape clean?

Teach you a trick and solve it easily!

<> believe that many car owners have such an experience, that is, turning on the wipers not only can't clean the rainwater on the glass, but also makes a sound of rubbing against the glass, which is very harsh. The first reaction of most car owners is that they feel that the wipers are broken, so they drive directly to the 4S store to replace a new wiper. In fact, for ordinary car owners, there is no need to spend this unjust money at all.

Generally speaking, the main component of the wiper blades of the wiper is rubber, so after a period of use, it will harden and age, and when the wiper is opened, it will rub against the windshield, resulting in a very harsh sound. At this time, the owner should first check whether there is a foreign object in the wiper blade, and ensure that it is clean, if the motor of the wiper always has abnormal noise, it is likely that the motor is broken and needs to be replaced, as long as you go to the repair shop to check and replace it.

What's more, if the wipers don't scrape cleanly, it's likely that there is an oil film on the glass, so there is one thing that can solve this problem well, and that is toothpaste. Toothpastes are generally abrasive in order to effectively remove dirt from teeth. Therefore, the owner can squeeze the toothpaste onto the seal of the wiper, and then rub the seal of the wiper with his hand to evenly apply the toothpaste on it, at this time, the toothpaste can play a very good role in removing the oil.

Of course, remember to install the wipers after this operation.

Hello! Glad for your question.

1. Wiper blade aging: two wiper blades are rubber products, which will be aged and hardened after a period of time, and it is more significant in winter. Most wiper blades are recommended to be replaced every one to two years.

2. There is a foreign object in the middle of the wiper blade: when the wiper is opened, there will be a sharp sound of friction between the wiper blade and the front windshield.

3. The installation angle of the two wiper arms is wrong: it will affect the wiper blades to jump on the windshield, then it will cause a sound. If the two wiper blades are normal, you need to adjust the angle of the wiper arm so that the two wiper blades are perpendicular to the windshield plane.

First of all, you need to confirm how long your wiper has been used, if it has been used for too long and its life has long passed, you need to consider replacing the wipe.

You can also try other methods:

Lift the strip up, **Strip:

1. If the strip is seriously deformed, hardened, or even cracked, if there are such symptoms, it indicates that the strip has been aged, and it is recommended to replace it.

2. If the adhesive strip is relatively soft, but it is only blown up when it rains, the overall feeling is blurry, and there are many small roads, indicating that there are more stubborn stains on your windshield, if you want to confirm, you can take a piece of clean paper on a sunny day and wipe it carefully, you will find that the paper will turn black. Then you have to wash the glass carefully (just put some dish soap and wipe it with a cloth). Of course, you will have to wash the strip as well, or even sand it with fine sandpaper, because the strip may have been sanded.

If you are familiar with the scraper, you can also separate the strip from the skeleton and replace the strip before and after, because the strip is "T" shaped when it leaves the factory, and the cutting edge below is in the middle, and it will be biased to one side after a period of time.

1.Remove the wipers of the car, and dismantle the wipers when the car is turned off;

Prepare water sandpaper, and use a small piece for each wiper repair;

Soak the wipers and water sandpaper with clean water, polish the wipers with water sandpaper, not only polish the two sides of the wipers, but also properly polish the front of the rubber strip, the time is not too long, 5 minutes is OK.

Sometimes we will find that when it rains heavily, the wiper wiper has a good wiping ability, but when it rains lightly, the wiper will leave uneven wiping marks on the front windshield, which may be because the rubber of the wiper has hardened.

To replace the wipers, it should be noted here that when replacing, the metal wiper rod should be lifted and tightened, and remember not to loosen it, because it is possible that after loosening, the metal rod will directly break the front windshield. Alternatively, you can wrap the end of the metal rod in a towel and then slowly lower it.

The rainwater wiper on the car glass is generally a problem of the wiper, it may be that the rubber strip on it is aging, the fit is not good, and the scraping is not in place, you can go to replace the wiper.

Wipe the water with a wiper and find that the water is not clean; It may be due to contaminants in the wiper blade strip. Lift the wipers.

Use a car towel (microfiber towels) to wipe off contaminants on the inside of the wiper blades.

Gently lower the wipers. Wiping water with a car wiper and observing that the problem is solved.

It is recommended to replace the boneless wiper blade, the wiper blade is soft, the scraping is relatively clean, and the glass water should be filled, which has the effect of cleaning. Happy with your car.

Buy a new pair of wipers from the Internet and replace them with Liu, ** not expensive. Generally, this situation will occur after 2 to 3 years of wipers, and the wipers will age.

Since the glass water can't be cleaned, you can only go to the car wash and ask professionals to help you solve the problem of dirty glass!

Try changing the wiper, it is estimated that there is a problem with your windshield wiper, check it.

You can buy it for about one or two dollars.

See if it's damaged, if it's damaged, you can try a new one

Hello, because it is a newly replaced windshield, there will generally be an oil film, you can use the cleaning agent to remove the oil film to scrub it and dry it and then scrape it with glass water to see if there is still a blurred phenomenon, in addition to the new sealing glass and the old wiper will also have an improper match, if there is still a blurred situation, go to 4S to check whether the glass arc is qualified, replace the new wiper to try!! Hope to understand!!

The first consideration is the angle of the wipers, which you put upright. Bend it to the sides and put it back in. Let's see if it's quieter.

If there is still a sound, it is that the wiper rubber is aging. In this case, you first take a piece of sandpaper, the thinnest kind, and gently polish the rubber strip of the wiper. It should be silent.

If there is still a sound, it means that the strip is very thin, so you can only replace it.

With the new wiper the glass is still blurry on rainy days, and the reason is "it"!

When it rains, the front windshield of the car is always not clean, and the wipers are broken. Replace the wipers with new ones and they will be clean.

When it rains lightly while driving, don't rush to turn on the wipers. At this time, there is not enough moisture on the front window, and the wiper is dry, which will only have the opposite effect. The mud stains on the front window are still difficult to scrape.

Use wipers in light rain, and it is best to spray the glass water before starting to scrape (spraying glass water can be used not only when parking, but also when driving). to ensure that there is enough moisture on the front window to warm the wipers.

The wipers are broken, the rubber strips have hardened, cracks and a series of problems, if you don't pay attention to replace them in time, it may damage your windshield. You can replace a pair of boneless wipers, and the size of JAC Tongyue wipers is about: 22 + 17 inches.

You can go to the Arrow Crown car products specialty store, where the wipers are of good quality and highly rated.

The wiper rubber is aged and needs to be replaced;

You can choose a bone-based wiper, which is the same as your original car, or you can replace the boneless one. It is recommended to choose Sandoli 430 series (a pair of about 30 yuan), or E2 series (about 50 yuan), Sandoli began to produce wipers in Taiwan in 1975, is currently the most professional manufacturer in China.

There are two main reasons:

The first is the wear and aging of the wiper blade rubber strip;

the second is the wiper linkage rod walking type;

The solution is to adjust the wiper linkage lever and replace the wiper blades.

According to your description, if this kind of problem occurs, it is recommended that you replace the wiper blades and add glass water to have a cleaning effect on the glass.

1.There are oil stains on the glass, clean it.

2.The wipers are worn and recommended to be replaced.

3.If it was previously a boneless wiper, it is recommended to switch to a boneless wiper.

4.The linkage rod is deformed, and the inside is slightly arched, just dress up.

Maybe the rubber strip is worn. Replace the wipers, about 20 yuan.

The wiper is broken, replaced with a good one, such as a boneless rain shabu.

It feels good to use a wiper when it is not raining and when it is raining heavily, but when you start the wiper in light rain, you will find that the wiper will leave traces of uneven wiping on the glass surface; This indicates that the wiper blade has hardened, or that the wiper blade has a scratch, which will cause uneven wiping and residual dirt.

Solution: Replace the wiper or wiper film face. However, it should be noted that the installation method and length of the wiper are different in different models and years. Some wipers only need to replace the rubber sheet, while some wipers need to be replaced in their entirety.

Many drivers 2113 people in the driving, will find that the front windshield 5261 is dirty after the wiper 4102 can not be clean, especially in the 1653 rainy day or night, it is very blurry, affecting the line of sight, is a very serious safety hazard.

There are several situations if the window glass is not clean. First, the wiper strip has not been replaced for a long time, aging and hardening, such a wiper has an impact on the use, it is recommended to replace it in time. Generally speaking, windshield wipers need to be replaced annually to maintain their good performance condition.

In another case, due to the usual negligence in cleaning the glass, coupled with the large amount of dust and oil smoke in the surrounding environment, the oil film is formed on the glass for a long time. Once the oil film is formed, the glass is difficult to scrape clean with a wiper and requires a special oil film remover to remove it.

So how should we avoid the formation of oil films? Vehicles parked as far as possible to avoid under the tree, under the smoke exhaust pipe of the hotel, can reduce the adhesion of oil pollution, for a long time not to use and there is no underground parking garage, it is recommended to use the car cover, although a little troublesome, but still have some effect.

Regular coating of glass and car bodies is also one of the ways to slow down the formation of oil film. We can buy our own coating, spray it on the body and glass after washing the car, and dry it with a soft cloth. The effect of this kind of coating agent is definitely not as good as the professional coating in the beauty shop, but it is cheap, simple to use, and the protective film formed is still possible to isolate the dust or something every day, and the glass after the coating has water repellency, and the rain will not stay in rainy days, which can provide a better sight environment for the driver and improve the safety of driving.

The coating agent can be used on a quarterly basis.

In addition to the above matters that need to be paid attention to, we usually use glass water, do not be greedy to save money and convenience to use tap water instead, after all, glass water has lubrication and better cleaning effect, can extend the service life of the wiper and can also make the glass scrape cleaner and reduce the adhesion of oil stains. In addition, the glass water has an anti-freeze function, as long as you choose the right anti-freeze index, you can ensure the normal use of the wiper system in the environment below zero degrees, which is also very important.