What should be paid attention to when the retractable part of the electric retractable door needs to

Updated on Car 2024-06-13
6 answers
  1. Anonymous users2024-02-11

    First: the size and style of the electric retractable door produced by the retractable door manufacturers are different, so the ideal electric retractable door should be selected first when making the door opening;

    Second: pay attention to the size of the retractable door, including the height of the retractable door, the width and length of the retractable door, the size of the door opening must be larger than the size of the retractable door, the general width of the door opening on each side should have more than 5 cm of space, the height of the door opening exceeds the height of the retractable door by 10 cm;

    Third: it is very important to leave space behind the door opening to install and maintain the telescopic door;

    Fourth: the road surface inside the door hole should be smooth, many in the construction, think that the door hole inside the outside can not be seen, so the road surface is not very careful, which is also worth noting.

    Fifth: pay attention to the pre-arrangement of the power supply of the retractable door.

    If you install an electric retractable door, the retracted part needs to be hidden in the door opening, and it is best to ask a professional electric retractable door installation master to give on-site guidance when building, so as to be foolproof.

    Bobai electric retractable door Bobai County Bobai Town Fourth Primary School electric retractable door.

    Does the installation of electric garage doors have an impact on the size of the garage door opening?

  2. Anonymous users2024-02-10

    It mainly depends on what kind of door you choose, when the door is not determined, the width of the door opening is absolutely enough to leave a clearance of one meter and five, the height is self-determined, the ground of the door hole needs to be straight with the outside walking ground, and the tail must be left with a maintenance opening.

  3. Anonymous users2024-02-09

    1. First use the head key to open the head cover, take out the wireless remote control, and adjust the use of the motor.

    2. After the motor is adjusted, the door row is closed, and the door body is fixed on the ground.

    3. Take the center of the door body as a reference to bury a round magnet in the middle of the wall on both sides.

    4. After that, bury the square magnet directly below the nose stop.

    5. Then connect the power cord live wire and neutral wire, and turn on the power.

    Precautions for installation of electric retractable doors

    1. Before installation, check the flatness of the ground to ensure that the ground meets the installation requirements. If the trackless telescopic door is installed, the requirement for the ground is that there can be no uneven places, because uneven places will affect the opening of the telescopic door, so the ground should be leveled before installation. If the rail telescopic door is installed, the requirements for the ground will be lower, and the height error can be controlled within the minute, and the telescopic door can be installed.

    2. If it is a trackless door lock, you need to install the magnet embedded in strict accordance with the instructions on the attached manual, and the size of the installation cannot be changed at will.

    3. When burying cement, the cable must be sleeved with PVC pipe, so that it can be buried underground with the magnet.

    4. The installation of the telescopic door is necessary to bury the ground wire, but it should be noted that the size of the wire diameter is best able to reach more than the square. When burying the wire diameter, try to deal with the joint, do a good job of waterproofing, and avoid the occurrence of leakage accidents.

  4. Anonymous users2024-02-08

    Hello dear! We'll be happy to answer for you. What is the shape of the electric retractable door when extended?

    Answer: Hello, dear kiss, the telescopic doors are diamond-shaped, which are made according to the principle of deformation and contraction of the diamond, which can greatly compress the space and make an effective slag return range. The diamond is the largest body that is searched in space after changing shapes, and it has more search ranges than any other body.

    At the same time, the diamond shape can be changed from the current situation to the diamond shape to occupy the maximum space, so according to this principle, the telescopic door is involved in becoming a diamond.

  5. Anonymous users2024-02-07

    Summary. Principle: Electric retractable door, also known as automatic retractable door, is mainly composed of door body, drive and control system. The door body of the telescopic door is made of high-quality aluminum alloy and ordinary square pipe pipes, and is hinged by the parallelogram principle, with a large telescopic flexible stroke.

    The drive of the electric telescopic door is driven by a special motor, worm gear deceleration, and equipped with a manual clutch, which can be manually opened and closed when the power is off, and the control system of the telescopic door has a control board, a button switch, and can be equipped with a wireless remote control device according to user needs. The motor used is a special special turbine worm motor, because of its special transmission principle, high stability, large output torque, low noise and moderate speed.

    4. Electric retractable door, open when in use. What is the principle of this design when it is not in use? What are the benefits?

    The function and characteristics of the retractable door The intelligent infrared anti-climb device will immediately alarm when someone climbs the door, so as to ensure the safety of the door. Special profiles in the high hardness zinc aluminum alloy empty profile on the liquid Sen blind on different geometric shapes of spring muscles and bones can greatly enhance its strength, the surface of the special electrophoresis treatment, the luster is infinite, not easy to stick to dust, not corroded by polluted gas, no rust, long warranty period.

    Principle: Electric retractable door, also known as automatic retractable door, is mainly composed of door body, drive and control system. The old door body of the telescopic door is made of high-quality aluminum alloy and ordinary Fangyou comic tube good section selling materials, and is hinged by the parallelogram principle, with a large telescopic flexible stroke. The drive of the electric telescopic door is driven by a special motor, worm gear deceleration, and equipped with a manual clutch, which can be manually opened and closed when the power is off, and the control system of the telescopic door has a control board, a button switch, and can be equipped with a wireless remote control device according to user needs.

    The motor used is a special special turbine worm motor, because of its special transmission principle, high stability, large output torque, low noise and moderate speed.

  6. Anonymous users2024-02-06

    The retractable door is actually a kind of electric door, the retractable door is widely used in schools, hospitals or parking lots and other areas, if you do not know much about the shape of the retractable door, you can combine the ** shown in our article to understand, the general retractable door will also be displayed with text, and equipped with infrared devices, you can sense the proximity of people or objects in time, you need to install the retractable door when you buy a retractable door, so today we will introduce the information of the installation of the retractable door.

    What are the steps to install a retractable door

    Installation introduction: fixed door body: put the door body into the track, and the bottom brace of the tail is fixed with a special fixing card and anchor expansion screws (M12 80).

    Limit switch: bury the limit device according to the opening and closing positions of the set door body. Fixed control box:

    The control box can be installed in the nose box or moved to a room within 10 meters of the main unit. Connecting lines: strictly according to the wiring diagram in order to connect the corresponding wiring (it is strictly forbidden to wire in the state of power-on), the wiring should be firm, the terminal and the terminal can not be short-circuited, and check whether the line is correct.

    Installation and commissioning: First of all, manually push and pull the door body in a manual way to check whether the door body is running normally, and then turn on the power supply when it is determined that the door body is good and virtual and the operation is normal. Turn on the power supply, the power indicator light of the control box is on, press the "on" button, the "on" indicator light is on, and the door can automatically open to the set limit and stop automatically.

    Press the "Close" button, the "Off" indicator light will be on, and the door body will automatically close to the set limit and stop automatically. In the process of debugging and operation, if it is found that the limit of the door body transportation source base line is not accurate, the height of the limit switch can be adjusted. Debugging and running more than 5 times, if everything is normal, it can be put into use.

    How to buy a retractable door

    Consider the following factors: the size of the local wind, and choose varieties with strong wind resistance where the wind is strong; Whether the local environment is saline-alkali land, close to the seaside, chemical area, etc., these places choose varieties with strong corrosion resistance; If the building is matched with greening, it is generally selected to match the varieties of black and stainless steel, which complement the greening of the building. If users have strong requirements for intelligent functions, we recommend a series of intelligent gate solutions, which are equipped with access gates, flagpoles, parking lots, sentry boxes, attendance systems, Bluetooth systems, mobile phone smart software systems, customer service systems, etc.

    In today's content, we mainly analyze and explain how to install the retractable door, because many users and friends have no relevant experience, when installing the retractable door, we recommend that you carry out it under the guidance of professionals, we mainly mentioned the specific steps of the retractable door installation, we should read carefully before installation, in addition to mentioning how to install the retractable door, we also analyzed the key points of the retractable door purchase, you can choose according to our tips.

    You can get it for free

Related questions
11 answers2024-06-13

According to "electric", the electric door is divided into ordinary type (power control box is required, and the power part is in the control box), mechatronics type (power part, and the logic circuit is on the electrical body). This kind of Denso is cost-effective, good reliability), intelligent integration type (just in the mechatronics to add liquid crystal display, electronic stroke, electronic torque, remote control debugging and other functions), intelligent integration is only the update of the Denso body, the development of intelligent integration is the intelligent integration of the bus type, and the update of power components, the use of frequency converters, and frequency conversion type. >>>More

7 answers2024-06-13

There is a chain, just pull it yourself.

There are many types of electric roller shutters: >>>More

9 answers2024-06-13

Electric folding doors have the following features:

1. Save space and expand the utilization rate of door openings. >>>More