The squatting urinal is broken, and I want to replace it, how to change it?

To remove a brick around the toilet bowl to break, first turn off the water supply and use a brick cutter along the tiles.

After sewing and cutting, the bricks are slowly removed with an electric pickaxe, and the water supply pipe can be dismantled after the fence is all removed, and then a crowbar is used.

Pry the squatting toilet, the ash of the lower seat of the squatting toilet should not be too large, and it should be easy to pry it off when you change the angle. Stable new squatting toilet needs to adjust the height is not suitable for the height of the need to remove part of the brick or fill the height, put it needs to be measured with a level, to be qualified after you can inlay the bricks, the flush pipe is best brick inlay after the dry effect will be a little better, not easy to fail, and finally refill the pipe part of the tile. You can also install a water pipe with a stable squat, and the flush pipe sealing ring must be pressed in place, if the tightness is not strong, you can play a little glass glue.

The pipe is sealed and fixed, and the ground of the pipe is flattened with a hard object, and the next step is to lay bricks.

It takes a little skill to change the squatting toilet, and it is best to find a professional installer to replace it. When you buy it from a hardware plumbing store, you will generally install it.

You can buy a urinal for the place where the barley is fed to the fish, and the place where the bathroom is sold will be installed for you to install on the door, so that you can change it, very simple thing.

As long as you go to a merchant who specializes in urinal sales, he will install it for free, so there is no need to worry about this problem.

It is best to find a professional installer to replace it, which is a technical job that ordinary people can do.

Buy one and find someone to change it. The squatting toilet needs to be replaced with a little plasterer.

Replacing the squatting toilet is still very troublesome for most families, one is that it involves removing the things around the squatting toilet, which takes a lot of time, and the other is that it needs to be installed, if the installation is not good, it will be more troublesome. If you want to replace the squatting toilet yourself, you can follow the following steps.

1. Clean up the sanitation around the squatting toilet;

2. Smash the tiles around the squatting toilet, and then remove the old squatting toilet;

3. When the tile is smashed, the surrounding waterproof coating will be damaged, and a layer of waterproof coating is also needed to be applied at this time to avoid water leakage in the future;

4. After the waterproof coating is dry, install the new squatting toilet and use cement to fix it around the new squatting toilet;

5. Wait until the cement is dry, then lay a new layer of tiles, and finally clean it.

What are the precautions for the installation of squatting toilets?

1. First of all, you must measure the size before installing.

2. When installing, it is also possible to coat a layer of asphalt or butter on the installation surface, which will prevent the product from swelling and cracking.

3. The observation belt does not have a trap, if there is no one, it needs to be set, which will play the role of odor insulation.

4. Do not use force and impact during installation, otherwise the product will be damaged.

Summary. Hello, ** around 300 yuan.

If you want to replace the damaged toilet, then you should first smash the tiles around the toilet, and then remove the damaged toilet. When smashing tiles, the waterproof layer around the squatting toilet is generally destroyed, and in order to avoid water leakage in the squatting toilet, it is also necessary to make a new layer of waterproofing in the surrounding position.

When the waterproof layer is dry, install the new squatting toilet of the same size and size in the original installation position, and then use cement to fix the squatting toilet, and then apply a circle of cement around the squatting toilet, and when the cement is dry, lay a new layer of tiles around the perimeter of the squatting toilet.

Precautions for the use of squatting toilets.

When using the squatting toilet, do not throw newspapers, diapers and other items that are easily clogged into it.

Avoid touching the surface of the squatting toilet with a hard object to avoid damaging the surface of the squatting toilet with much force.

In order to ensure the cleanliness and hygiene of the use of the squatting toilet and prevent the breeding of bacteria, it is necessary to regularly disinfect and clean the squatting toilet with cleaning solution and disinfectant solution to keep its surface clean and tidy.

How much does it cost to replace the labor when the squatting toilet is broken.

Hello, ** around 300 yuan. If you want to replace the damaged toilet, then you should first smash the tiles around the toilet, and then remove the damaged toilet. When smashing tiles, the waterproof layer around the squatting toilet is generally destroyed, and in order to avoid water leakage in the squatting toilet, it is also necessary to make a new layer of waterproofing in the surrounding position.

When the waterproof layer is dry, install the new squatting toilet of the same size and size in the original installation position, and then use cement to fix the squatting toilet, and then apply a circle of cement around the squatting toilet, and when the cement is dry, lay a new layer of tiles around the perimeter of the squatting toilet. Precautions for the use of squatting toiletsWhen using squatting toilets, do not throw newspapers, diapers and other items that are easily clogged into it. Avoid touching the surface of the squatting toilet with a hard object to avoid damaging the surface of the squatting toilet with much force.

In order to ensure the cleanliness and hygiene of the use of the squatting toilet and prevent the breeding of bacteria, it is necessary to regularly disinfect and clean the squatting toilet with cleaning solution and disinfectant solution to keep its surface clean and tidy.

How long does it take to use it from construction to completion, and what materials do I need to prepare?

The specific time is based on the individual's ability to operate. You need a ruler, and cement, sand, and bricks, and you can have a level. Measure the size, set the position, and fix it with mortar.

How long after completion can I go to the toilet to use.

It will be ready for use in about 24 hours.

1. If it is a whole replacement, you can remove the water tank.

Removal is as simple as loosening the flush fitting at the bottom of the tank and removing the fitting that connects to the high-pressure hose. After separating the two, lift the entire tank up with both hands to remove it. Because the tank is hung on the wall.

When installing the whole piece of the new water tank, pay attention to whether the position of the new water tank hanging is comparable to the old one. If not, move the wall pendant. After hanging up the new water tank, connect the upper and lower flush pipes and the high-pressure inlet hose.

2. If there is a problem with the water parts inside the water tank, you can only replace the water parts in the box. This is a little more complicated. Carefully remove the connection between the internal water parts and the box body, and then install the new water parts.

It is necessary to dismantle the original one for a long time, clean the ground as a whole, and then install a new squatting toilet.

When installing the squatting toilet, the sewer pipe should be reserved at the appropriate position from the wall according to the sewage outlet of the installed squatting toilet, and the distance between the sewer pipe inlet and the ground level should also be determined. When installing a squatting urinal, it is required to reserve the depth of the pit under the ground, and remember that the depth must be greater than the height of the squatting urinal to facilitate its installation.

Place the connecting rubber plug into the water inlet hole of the squatting toilet and clamp tightly. Apply a layer of glass glue or putty to the outer edge of the contact with the water inlet hole of the squatting toilet, and insert the water inlet pipe into the water inlet hole of the rubber plug so that it is well sealed with the rubber plug to avoid water leakage.

Squatting generally has to be replaced, because to smash off a part of the bricks, waterproof is must be destroyed, for future safety, it is recommended that LZ take off the old squatting poop, the surrounding treatment is clean, in doing a poop waterproof is more safe, if it is a toilet do not use,

How to change the squatting urinal: Check whether the ruler of the drain outlet and the squatting pit drain is appropriate. Put the sealing ring to the drain outlet, if it is useless, you can replace it with putty, surround it in a circle, and then put fine sand around it, put the squatting pit on it, level it with a level, and the center of the water tank and the center of the squat pit should form a line, connect the squatting pit, and finally cement leveling.

1.A squatting toilet refers to a toilet that is characterized by the human body taking a squatting type when used. Squatting toilets are divided into uncovered and covered; The squatting toilet structure has a backflow bend and no backwater bend.

The working principle of the trap is to use a horizontal"s"type elbow, resulting in one"Water seal"to prevent the backflow of odors from the sewer.

OK. Most of the squatting pits are filled with mortar after positioning, and when this kind of squatting pit is broken, the surrounding stable mortar should be removed to the squatting pit. According to the size of the new squatting pit, clean up the slightly larger area, and install the new squatting pit after the lower sewage pipe is docked without any problem, and the positioning is stable and the floor is restored.

Dredging squatting pit treatment method: 1. Check the cause of blockage; 2. Carry out preliminary spring dredging for the full water situation of the pit; 3. Since the pit is not easy to disassemble and assemble, it is necessary to buy a new pit pipe to reinstall the causes and solutions of the blockage caused by the squatting pit: In the houses from the 70s to the 80s, the structure of the toilet is generally a squatting pit.

In the construction of the squatting pit, there must be a U-shaped trap to prevent odor from fumigating. In terms of design, this is a method that can effectively solve the defects of the squatting pit, but there is a disadvantage, that is, in the case of long-term use, the U-shaped bend of the squatting pit is easy to form scaling. Generally, after about 20 years of use, the scale will become thicker and thicker, and affect the normal use, and it is easy to cause frequent blockage.

The maintenance method is as follows: before the appearance of scaling, it is recommended that residents pay more attention to water when using, such as urination is used up, flush in time, especially pay attention to water conservation, and can not reduce the timeliness and frequency of flushing in order to save water use, so that it is easy to cause urine to stay in the elbow for a long time, form thick urine alkali, and eventually lead to scaling can not be eliminated through normal channels, resulting in a small inner diameter of the pipeline, resulting in pipeline blockage. Here's how to fix it:

1.After the fouling has appeared, the occupants can replace the elbow to solve the blockage problem. (Note:.)

Because the structure of the toilet in the building, the elbows of the sewer pipes are all in the homes of the residents downstairs, so the consent of the residents downstairs is required to use this method. )2.Residents can also use professional urine alkali cleaning equipment to clean directly in their homes and unclog pipes.

Note: This method is simple and easy. You may be interested in reading:

What should I do if the kitchen water pipe is blocked? What should I do if the toilet sewer pipe is leaking? (Fig).

You can knock out the broken ones, be sure to buy the full-size ones. If it is big, you have to smash bricks, and if it is small, you have to make up cement mortar.

Of course, you can, but you need the cooperation of the bricklayer master.

Yes, this one can be exchanged.

This can be bought in those places that sell furniture.

It's okay to just change to a single one.

It depends on which one you have and whether it is suitable for direct replacement.

I wish you a good time solving problems and a happy life.

Yes, you can buy it at a furniture store.