How to solve the problem of slow toilet drainage? What to do if the toilet drains slowly?

1. Accessories are damaged.

The toilet flushes slowly and does not whirlpool, which may be caused by the lack of water in the toilet tank, and the most common situation is that the accessories are loose or damaged. It is recommended to open the water tank, tighten and replace the corresponding accessories, and the problem can be easily solved.

2. The water level of the inlet valve is low.

The low water level of the inlet valve will cause the toilet to flush slowly, weakly, and without a whirlpool. It is recommended to remove the inlet valve, remove the inlet valve buckle, turn the inlet valve body counterclockwise, then adjust the height of the body accordingly, and finally rotate the inlet valve body clockwise. Install the buckle, install the water inlet valve, connect the filter and the water inlet pipe, and the fault will be solved.

3. Toilet quality problems.

If it is a newly bought toilet, there is a problem of slow flushing and no whirlpool, you can consider the quality of the toilet itself, especially some small brands are cheap, due to the unreasonable design of itself, resulting in many problems in use.

What can I do if the toilet flushes poorly and the water is slow:

First of all, if it is a quality problem of the toilet itself, it is recommended to find a professional to debug or replace it; Secondly, if the water level of the water tank is not enough, it is recommended to put an empty bottle in it to improve buoyancy; Finally, if the toilet is blocked, it is recommended to use a leather puff to squeeze it vigorously at the water outlet, or find someone to dredge it.

What are some tips for unclogging the toilet:

1. Use a leather puff or cloth strip mop.

First of all, if the toilet at home is clogged, you can buy a leather pouch, hold the pouch and aim it at the water outlet a few times, or squeeze it with a cloth mop to use the pressure to discharge the dirt.

2. Large Coke bottles.

Secondly, pour a mixture of cola or baking soda and vinegar into the toilet, close the toilet lid, sit on it and press it tightly for a while, and produce gas through chemical reaction to achieve the dredging effect.

3. Spring dredger.

Then, if there is a spring dredge at home, you can insert its small head into the toilet drain, keep rotating the handle, until the spring head goes deep into the deepest part of the pipe, and then pull it back out, so that the dirt can be dragged out and dredged.

4. Hot water + dish soap.

Finally, you can pour it into the toilet bowl to wash it clean, pour hot water at the same time, and then squeeze it with a leather puff to decompose the grease in the pipe, and then press the flush button to dredge the toilet. In addition, you can also use adhesive tape to close the toilet bowl to ensure that there is no air leakage, and then press the water tank switch to put water into the toilet, press it down when the tape bulges, and then release the water and press again, so that the operation can be dredged repeatedly.

The toilet flushes slowly, causing the toilet to clog easily, and it is more waste water than before, many people think that when the toilet flushes slowly, the toilet is broken, but it is not necessarily.

If your toilet drain slows down, don't rush to find someone to fix it, check these two places, if there is no problem in these two places, it may be that your toilet is broken, if there is a problem in these two places, you only need to move it to make the water volume large and fierce.

1. The chain stool adjusts the drain valve.

The amount of flush water in our toilet is determined according to the drain valve inside the water tank, the drain valve inside the water tank has two control buttons, we check these two control buttons first, and after opening the option, you can see these two scale buttons.

If you want to increase the amount of water in the toilet, it is recommended that you adjust these two buttons and adjust the two buttons on the drain valve to the bottom, so that the water output increases.

If you feel that you can't adjust the socks and don't dare to do it yourself, you can find a worker to help you adjust, in fact, the adjustment is very simple, if the worker needs to charge your fee for the adjustment, it is better to study it yourself.

2. Press the two buttons together.

The toilet has two flush buttons, if the toilet drain in your home is slow, we can press the two buttons together when flushing the toilet, which can also increase the flush of the toilet.

However, it is not recommended that you press the two buttons together when flushing, although this method can increase the flush of the toilet, it will affect the service life of the toilet and may cause damage to internal parts.

3. Dredge the toilet frequently.

In fact, sometimes it is not that the flush of the toilet has become smaller, but that the pipe is blocked and the flush of the toilet is affected, and the reason why the water is slow is because the pipe under the toilet is blocked.

The pipe under the toilet is blocked, but it is not completely blocked, and the water will be slower if there is a gap, and no matter how big the treatment is, the blockage in the pipe will be unblocked.

If the toilet is blocked, it must be dredged in time, the pipe is blocked, there is no need to ask workers to come to the door, we can solve the problem of pipe blockage by using [pipe pass] at home.

Pour the pipe into the toilet bowl, press the flush button, it will flow down the water into the toilet pipe, and after falling on the blockage in the pipe, it will quickly start to dissolve the dirt in the pipe.

In addition to excrement, there will also be confetti hair in the blockage under the toilet pipe, which is usually caused by our carelessness when using it, and the hair that falls out after combing our hair should not be thrown into the toilet.

The hair that falls out when combing should be thrown in the trash, the hair will hang on the inner wall of the pipe, and the hair will become entangled in the diarrhea and excrement and cause the pipe to be blocked.

When we choose toilet paper, we should also choose a good quality, so that it can be dissolved in the toilet after throwing it in, if the quality of toilet paper is not good, it is recommended that you do not throw it in the toilet, it is better to throw it away in the trash.

Due to the importance and frequency of use of the toilet, slow drainage is a very troublesome topic. In addition to the reasons for later use such as clogged pipes and insufficient water pressure. Choosing the wrong toilet is also an important factor.

If you choose the wrong toilet, even the best toilet will drain slowly. In addition to looking at the displacement, pit spacing, and quality of the toilet, it is especially reminded that you also need to look at whether the sewer pipe has a trap.

If there is a trap in the sewer pipe, then only a floor-standing flush toilet can be used. If you don't have a water trap, you can use a siphon toilet and a wall-hung toilet. What is the reason for this?

It turns out that the siphon toilet comes with a trap and the trap of the sewer pipe are superimposed, which will trap air in the middle and cause poor toilet drainage.

So how do you tell if your own pipe has a trap?

1. The easiest way: Before installing the aluminum gusset in the bathroom, look up at the pipe setting of the top rolling liquid part of the bathroom, which is the simplest and safest method, and it is suitable for customers regardless of whether there is displacement or not.

The following is the difference between a village bend and a bend without a trap.

2. The more complex operation method is suitable for friends who have installed aluminum gusset in the bathroom and do not want to dismantle, or who are installing gypsum board.

Prepare tools: a large basin of water, a long stick.

First pour a large basin of water into the sewage pipe, then poke into the pipe with a long stick, and then take out the pipe to observe whether there is a large area of moisture at the end, if there is a large area of moisture, it means that the pipeline has a trap, if there is no moisture, it means that the pipeline has no trap. (This method is limited to cases where the pipe is not shifted).

Choosing the right toilet is usually the first element of drainage, of course, in addition to the toilet purchase, you must also pay attention to the flange interface when installing the toilet. The flange connection is misaligned, which will also cause the toilet to drain slowly. Therefore, when the master is searching for the front toilet, it is best to supervise the whole process, and be sure to confirm that there are no mistakes in the installation location and method.

If the toilet flush is not good, it will affect the use. What should I do if the toilet drains slowly? PChouse will take you to find out.

The toilet drains too slowly, probably because the toilet itself does not pump enough water and the water pressure is insufficient. For this reason, we increase the speed of water flow by increasing the amount of water.

Put a plastic water bottle in the water tank, and then adjust the screw of the water inlet valve clockwise to let the water level rise, pay attention to the water to keep at least 10mm away from the overflow nozzle of the drain valve, so that the water level of the water tank can be raised.

If the flush volume is too small, it will also cause the toilet to drain too slowly, and when this happens, you can open the lid of the tank and make proper adjustments to the amount of water in the tank, which can improve the water output.

The slow draining may be due to a blockage in the sewer pipe, and you need to contact a professional to unclog the sewer pipe.

After the toilet is used for a long time, a lot of pollutants will accumulate in the sewer pipe, which will also cause the toilet to drain slowly. The sewer pipe can be removed and soaked in an acidic solution, and the accumulated contaminants in the pipe can be removed in a short time. After reinstallation, the slow running of the water will be improved.

Summary. Hello, glad to answer for you. Dear, the toilet drains very slowly, and there may be a problem with clogging. can be unblocked by the tool. A spring dredge or toilet bowl puller, go deep into it to dredge.

Hello, very high no Kuanxing for you to answer. Kiss, the toilet bowl is very slow to use bright water, and there may be a problem of blockage. can be unblocked by the tool. Spring dredger or branch toilet bowl, go deep into it to dredge.

2. It may be that the water pressure is insufficient, the sail chain can properly adjust the water level of the water tank, and then increase the amount of water, and put a bottle filled with water in the water tank. 3. If there is dirt in the toilet, you can clean the inside of the toilet, and dry the water in the tank (suck it out with a rag again and again, wring it out), and pour it into dilute hydrochloric acid to descale.

When the toilet drains slowly, it's likely that the pipe is clogged or the pump is damaged. Here are some things you can do to address this issue:

1.Use a toilet pass: You can use a toilet pass to solve a clogged pipe. Insert the toilet pass into the toilet drain hole and whip violently several times until the clogged material is removed.

2.Clean drains: Use a pipe cleaner or homemade cleaner to clean your pipes. Pour the detergent into the toilet bowl and wait for about half an hour before rinsing it with plenty of water after the collapse.

3.Check the pump: If the Huixiao drainage pipe still can't drain smoothly after being cleaned, then you need to check whether the pump is damaged or faulty. Inspect the pump and replace damaged or aged parts.

4.Pipe Cleaning: If the drain is severely blocked, a pipe cleaning is required. Use professional pipe cleaning equipment or have your pipes cleaned by a professional cleaner.

5.Precautionary measures: Avoid throwing large pieces of paper, sanitary napkins, hair, food scraps, and other debris into the toilet bowl to avoid clogging the pipes.

In short, when the toilet drains very slowly, you need to take corresponding measures in time to prevent the blockage from seriously affecting your life. If the situation is more serious, you should consult professional advice and suggestions in a timely manner.

Slow toilet draining can be caused by a number of reasons, here are some possible ways to fix it:

1.Clean up hair: Excess hair or other debris in the toilet bowl can cause poor drainage. Clean up hair and other debris from the toilet regularly.

2.Check the old sewer in Sunqiao: If the sewer of the toilet is clogged, it may cause the toilet to drain slowly. Please check the drain for garbage or debris.

3.Replace the toilet plug: If the toilet plug is aged or damaged, it may cause the toilet to drain slowly. Please replace the toilet plug.

4.Clean the toilet: If the inside of the toilet bowl is heavily dirty, it may cause the toilet to drain slowly. Please clean the toilet regularly.

5.Adjust the toilet water level: If the toilet water level is too low, it may cause the toilet to drain slowly. Please adjust the toilet water level.

If the problem cannot be solved by the method of escalation, it is recommended to have the toilet bowl inspected and repaired by a professional.

How to deal with slow toilet drainage: Dredge it with a sewer unclogging agent.

If the toilet drains slowly, the pipes may become clogged. For this reason, the solution is to use sewer dredging agent, which has a good effect on blockages caused by hair, greasy, paper towels, etc., and can be applied to unclog blockages such as washbasins, wash basins, floor drains, and toilets.

How to clean the toilet

1. Toilet cleaning treasure.

It is called toilet automatic detergent, which is put in from the water tank of the toilet, automatically dissolves the water, and every time the toilet is flushed, the washing liquid containing the active ingredient will flow out with the water, automatically cleaning the toilet, keeping the toilet sidewall bright and clean.

2. Shampoo method.

There are children at home, and they don't dare to put cleaning products such as toilet cleaners, so they change to shampoo at home, dissolve the shampoo in the water tank or flush the toilet with foaming water that dissolves the shampoo, and after soaking for an hour, the toilet wall is very clean.

3. Cola cleaning method.

Don't throw away the Coke you drink at home, pour the Coke on it, remove the toilet paper and waste after an hour, wash it with water, and if you don't wipe the toilet for a long time, the simple disinfection method will not be so powerful. For stubborn stains, try the following methods.

4. White vinegar method.

When there is dirt in the toilet, replace it with white vinegar with water, put it in the urinal, soak the urinal in white vinegar water for 1 hour, and brush the dirt vigorously with the brush of the urinal.