How do you trip electricity? What should I do if the electric switch trips?

If the electricity trips, you should check the wiring and electrical appliances first, and generally the air switch.

There will be a blue button on the panel, and the button will pop up when leakage protection, in this case, press it in, and then turn on the switch. If the trip is caused by an overload of the electrical appliance, then the relevant electrical appliance should be powered off first, and then the switch should be turned on, so that it can be restored. The safe operation of the traction power supply system that supplies power to the electric locomotive should be ensured.

In the event of an accident, it is installed in the traction substation (opening and closing station.

partition kiosk) is the short-circuit current generated by the accident.

Activate, automatically disconnect the circuit breaker that supplies power to the accident point to reduce the scope of the accident, ensure the safe operation of other equipment and supply power to the non-accident line normally. This action of automatically disconnecting the circuit breaker due to an accident is customarily called "tripping".

It depends on what kind of brake it is, if it is an air switch or leakage protector, it can be tripped for short circuit, overload, and leakage; If it is a simple circuit breaker, the trip is serious, the load exceeds the rated voltage of the circuit breaker, there is a risk of burning the circuit breaker, if you encounter a situation, it is best to wear insulating gloves to pull the brake.

If you use too high-power household appliances, the electricity will trip, and if you turn on the high-power appliances in your home at the same time, you will trip if you use the voltage that exceeds the rated voltage of the circuit breaker.

It depends on the material of your fuse.

If the load is too heavy or a short circuit occurs, it will trip itself.

Summary. Hello, I am glad to answer for you: If you want to simply detect whether the leakage protector is working normally, the easiest way is to press the detection button on the leakage protector to make a trip action.

Hello, I am happy to answer for you: If you want to simply detect whether the leakage protector is working normally, the easiest way is to press the detection button on the leakage protector, and you can make a bad reputation to jump the action.

How to trip the electricity: The method of tripping the electric switch knife is the first method, so that the home circuit is short-circuited, and the side beam is to short-connect the live wire and the neutral line in a zhao, if the load is too large or a short circuit occurs, it will trip from the slag base. To put it simply, the second method is to use high-power electrical appliances, such as connecting a much more powerful air conditioner, electric stove, etc., or tripping if water enters the switch.

1. The switch is broken and needs to be replaced with a new one.

2. If the shrapnel of the switch does not touch the contact of the incoming caller, you can pull down the switch and push it again.

3. It may be that the line is burned out, and it is best to find a professional to help repair it.

4. If the fuse is broken, if it cannot be restored, it needs to be replaced with a new fuseThere are definitely a lot of sockets that need to be installed at home, and the quality of the sockets is also very important, whether it is fixed on the wall or multi-functional, there can be no problems with the quality. It is recommended that you choose a big brand when buying, and the quality of the product will be more guaranteed.

Precautions for the use of electric switches.

To ensure that the insulation performance of the power cord is good, all electrical circuits must be consistent with the voltage level of the stove bucket land, and adapt to the use environment and operating conditions.

It is forbidden to connect wires or install high-power electrical appliances without permission to avoid electrical fires caused by overloading of electrical circuits.

When you smell the burning smell of electrical equipment or find it smoking, you must immediately cut off the power supply and turn it off, and find a professional electrician for maintenance.

The above content refers to Encyclopedia - Electric Switch.

Find the cause of household leakage tripping:

Suppose there is a leakage trip at home, and you don't know where the problem is, you can follow the steps to find it:

1. Turn off all switches and pull out all electrical plugs, including the basement and other places that you don't pay attention to.

2. Close the main switch to test whether the main circuit is intact, if it is no longer tripped, it means that the main circuit is intact. If it trips, it proves that the problem is in the main circuit, and it is necessary to further disassemble the line to find it in different areas, and it is recommended to find a professional electrician.

3. After the main circuit is powered, the power is transmitted one by one, and the interval between each switch is half a minute. After the switch is sent, plug the electrical cords into the wall socket one by one, and each plug is plugged in half a minute apart. If a trip occurs when a switch is closed or an appliance is plugged in, the leakage point has been found.

When the cause of tripping is found, a leakage circuit breaker is used for leakage protection in the line with a rated voltage of 230V 400V and a rated current of 63A. When someone is electrocuted or the leakage current of the circuit exceeds the specified value, the leakage circuit breaker can automatically cut off the power supply to ensure personal safety and prevent accidents caused by leakage current in the equipment.

The leakage circuit breaker has the function of overload and short circuit protection, which can be used to protect the overload and short circuit of the line, and can also be used for infrequent conversion of the line under normal circumstances.

1. If the electrical appliances at home are overloaded and exceed the rated load, this kind of trip belongs to the overload protection trip, and the electrical equipment that is being used can be reduced.

2. Some electrical appliances at home have grounding phenomenon and trip due to leakage protection. You can gradually plug in or open the electrical appliances, when opening a certain electrical appliance tripping, you must first check whether there is a suspicion of leakage, or high-power electrical appliances, the load has accumulated to exceed the rated load.

3. Check whether the equipment is leaking can turn off other electrical appliances, turn on this equipment alone, if it is turned on normally, it means that the equipment does not leak, if it will also trip, it means that the problem is on this equipment.

4. If you check that there is no leakage equipment, it is a load problem, you can first see how big your air opening is, but also pay attention to the allowable load of the meter, and then convert the total power of the electrical appliances you turn on in use.

5. If none of the above problems are the above, then change to a new empty open with the same capacity to see if it is a trip caused by empty opening failure or allergies.

If there is no abnormality, wait 3-5 minutes and then try again. Because it is difficult for the heat element to recover in a short period of time if it is an empty heat, it is necessary to wait for a while before it can be sent again.

Check whether there is any abnormality in the empty opening, such as whether there is obvious burning.

3.If you try to send it once, it will immediately open and jump again, it means:

The load connected to the empty opening has a short-circuit fault.

The load connected to the empty opening has a ground fault.

There are two possible causes of tripping;

First, the electricity load during the peak period of household electricity consumption is too high, and the capacity you reported to the power supply company is insufficient, so it is recommended that you apply for "capacity increase" to the power supply company, and you can pay attention to and bind the "China Southern Power Grid 95598" public service platform "My Electricity Consumption" "Business Handling" "Business Change" Select "Capacity Increase" Fill in the handling information, the person in charge and the SMS verification code and click "Confirm".

Second, if the reported capacity is sufficient, it may be that the rated current of your air switch is too small to meet your household electricity load, or there is leakage in the line that causes the leakage switch to trip, it is recommended that you entrust a qualified electrician to check it for you.

What should I do if the leakage switch at home trips.

Just send the power without tripping, after a while to trip, the solution turned out to be so simple, worthy of the old electrician.

You said that the power cord of the electric wok is a little virtual, and it must be moved to light up, because the power cord is ignited when it shakes, causing the air switch to trip, and the socket contact reed is broken. Another point may be that the power strip power cord is thin.

In summer, the weather is humid and there is a lot of moisture in the air, which is easy to cause electrical appliances and circuits to ignite, which will cause the protective tripping of the security device!

In summer, it may be that the electricity consumption is large and the switch is small.

If you don't tell you, you don't tell you (*m*).

Hurry up and check the line to see if there is a problem?

There are two reasons for tripping: the first situation: the capacity you reported to the power supply company is insufficient, it is recommended that you apply for "capacity increase" to the power supply company, you can pay attention to and bind the "China Southern Power Grid 95598" public service platform "My Electricity" "Business Handling" "Business Change" Select "Capacity Increase" Fill in the handling information, the person in charge and the SMS verification code and click "Confirm".

The second situation: if the reported capacity is sufficient, it may be that the rated current of your air switch is too small to meet your household electricity load or the electrical appliances have leakage and cause tripping, it is recommended that you entrust a qualified electrician to check for you.

That means that there is a leakage, check it

1. Reduce the use of electrical appliances. There are many electrical appliances in the home, and the load of induction cooker, refrigerator and refrigerator at the same time may cause too much load on the circuit, which will cause the circuit to trip, and people should not use too many electrical appliances at the same time.

2. Remove the leakage socket. If the socket strip at home is used for a long time, it may lead to leakage, which will cause the circuit to trip at home, and people should remove the leakage socket in time.

3. Use waterproof sockets in the kitchen. Water is inevitably needed in the kitchen, and water is a conductor of electricity, so waterproof sockets should be used in the kitchen, so as to avoid tripping caused by broken sockets.