Tempered paint on the paint, what is the tempered coating

Haha, I am the owner of the paint factory, to tell you, tempered paint contains gray calcium powder, containing a large amount of alkaline substances, alkaline substances and latex paint will react, resulting in the phenomenon of pan flowers, that is, the uneven color of a piece.

There is no anti-magnetic coating, but there is melamine coating, what you are asking should be melamine coating, and there are many formulas of melamine coating! Some melamine coatings are tempered coatings!

Some melamine paints contain a lot of glue, which reduces the amount of gray calcium, so there will be less alkaline substances, and latex paint can be brushed on it.

The most critical question is: how to know the pH value of the paint! Latex paint requires the pH value of the wall to be about 7, and the pH value of the paint can be tested with pH test paper. But most paint shops know which paint can be painted with latex paint, so don't worry.

It's completely self-made, and it's not complicated.

First of all, sand the wall with at least 600 mesh sandpaper to increase the adhesion of the paint.

After sanding, wipe the wall with a rag to make it oil-free, water-free, and ash-free.

Next, make a primer, a water-based sealing primer, to seal, resist alkali, and increase the adhesion of the coating.

After the primer has dried, it is ready to be painted.

Well, you can brush the primer first, which is to play a sealing role, and then brush the latex paint, the effect is good.

Abstract: In home decoration, coatings are often used, and there are many types of coatings, such as waterproof coatings, fireproof coatings, anti-corrosion coatings, anti-mildew coatings, powder coatings, etc., so have you heard of tempered coatings? What is a tempered coating?

Tempered coatings are made of silica sol and acrylic emulsion as the main film-forming substances, and are formulated into organic-inorganic composite architectural coatings. The coating film of tempered coating has good hardness, washing resistance, chemical resistance and other properties. The coating does not pollute the environment, the cost is moderate, and it is in line with the development direction of architectural coatings.

Its coating is hard, elegant, white and shiny, delicate feel, finger scratch-free, scrub-resistant, bump-resistant, non-pulverized and non-cracking, and it is an ideal new indoor material.

The advantages of two posture disturbances and tempered coatings.

1. Wall tempered coatings are non-toxic, non-polluting, and will not harm people's health, completely canceling the existence of traditional coatings, such as solvent-based coatings, polyurethane coatings, etc., which contain a large number of toxic substances that endanger human health - formaldehyde, benzene and other substances.

2. The performance indicators of wall tempered coatings are more reasonable, such as finish, hardness, moisture-proof and breathable performance, wet rub resistance, heat resistance, adhesion, frost resistance, etc., which are qualitatively breakthroughs and leaps compared with traditional coatings.

3. Wall tempered coatings have a variety of functions, such as insect prevention, anti-corrosion, radiation protection, ultraviolet protection, sound insulation and flame retardant, etc., while the traditional coating function is relatively simple.

4. The service life of wall tempered coatings is generally as long as 15 years and 20 years, which is far longer than the service life of traditional coatings of about 5 years.

Third, the shortcomings of tempered coatings.

Although tempered coatings have many advantages, there are also certain drawbacks, that is, they are too expensive, the cost is high, and consumers at the middle and low levels have not used this coating.

Summary. Painted walls can scrape off the tempered paint, but the following things need to be noted:1

Tempered coatings are generally used to enhance the hardness and wear resistance of walls, and it is not recommended to scrape off tempered coatings if the wall needs to maintain these properties. 2.Scraping off tempered paint requires the use of appropriate tools and techniques to avoid damaging the wall.

3.After scraping off the tempered paint, the wall needs to be treated, such as filling in the scratches, brushing with new paint, etc. 4.

It is recommended to consult a professional paint application company or worker before scraping off the tempered paint to ensure the correct treatment method and effect.

Paint the wall can scrape off the tempered paint, but you need to pay attention to the following: 1Tempered coatings are generally used to enhance the hardness and wear resistance of walls, and it is not recommended to scrape off tempered coatings if the wall needs to maintain these properties.

2.Scraping off tempered paint requires the use of appropriate tools and techniques to avoid damaging the wall. 3.

After scraping off the tempered paint, the wall needs to be treated, such as filling in the scratches, brushing with new paint, etc. 4.It is recommended to consult a professional paint construction company or worker before scraping off the tempered paint to ensure the correct treatment method and effect.

Fellow, I really didn't understand, I can be more specific.

The specific steps to scrape off the tempered paint on the painted wall are as follows:1Prepare the tool:

Scrapers, sandpaper, cleaning tools (e.g. cloths, mops, etc.). 2.Cleaning the walls:

Clean the wall with a cleaning tool to remove dust, oil and other debris. 3.Scrape off the tempered paint:

Using a scraper to scrape the tempered paint to collapse the rock requires attention and direction to avoid scratching the wall. 4.Polishing the walls:

Sand the wall with sandpaper and smooth out scratches and rough places to make the surface smooth. 5.Cleaning the walls:

Clean the wall again with a cleaning tool to remove scratches and sandpaper residue. 6.Dealing with walls:

Fill in scratches, repair walls, or reapply new paint as needed. It should be noted that scraping off the tempered paint will affect the hardness and wear resistance of the wall, it is recommended to consider whether the tempered paint needs to be scraped off before applying the virtual brother, if it needs to be scraped off, it is recommended to seek professional paint construction companies or workers to build a poor jujube and help.

Can you apply wall paint on tempered paintAnd what are the advantages of tempered coatings?

The hardness of tempered coating is greater, and the hardness and gloss after construction are better than melamine.

Can you apply wall paint on tempered paint - good finish.

The hardened coating has a good surface finish and not only has anti-insect and anti-corrosion properties, but also protects against UV specific features. Superior to traditional decorative paintings.

The tempered paint film has high hardness, anti-fouling and easy to clean. When you find dirt on the wall, just wipe it with a damp towel and the water won't soak on the wall. It is a very profitable product, and the mess is especially suitable for decoration in warehouses and other places.

Temperate celery is very resistant to painting washing and related tests have shown that the amount of dry exfoliation is up to 10,000 times or more. The service life can reach 15-20 years.

Can you apply wall paint on tempered paint-The tempered coating has high hardness and is a material with increased hardness. It has higher hardness and higher brightness than melamine. The toughened coating with a good finish (lining looks porcelain, side-view mirror like) has many functions, such as insect resistance, anti-corrosion, radiation resistance, UV resistance, sound insulation and flame retardants, etc., and resistance to softness, hardness and moisture of tempered paint.

Breathability, wet wipe resistance, heat resistance, adhesion, frost resistance, etc., have made qualitative progress and leaps compared to conventional paints.

Low cost: The coating cost is moderate, which is very suitable for painting or temporary decoration in warehouses and other places. Long service life, resistant to scrubbing and dry scrubbing for more than 10,000 times; According to scientific measurements of the life of plywood, more than 15 - 20 years; It can be used for a wide range of applications and can be used to paint interior walls, but also for exterior wall decoration can also be adjusted in a variety of decorative colors instead of brick.

That's it for you, I hope it will be useful to you.

You can get it for free

2. Scraping putty: The number of times of scraping putty can be determined by the flatness of the wall, generally three times, and the weight ratio of putty is: melamine coating

Talc: cellulose =, the first time with a rubber scraper transversely full scrape, a scraper followed by a scraper, the joint shall not be left behind, each scraper after the end of the scraper should be clean and neat, after drying sandpaper, the floating putty and the traces of the sand, and then the wall is cleaned. The second time with a rubber scraper vertical full scrape, the materials and methods used are the same as the first putty, after drying, with fine sandpaper grinding and polishing, the putty shall not be worn through.

3. The painting sequence is to brush the top plate first and then the wall, and the wall is first up and then down. Clean the wall first, and wipe off the dust on the wall with a cloth. The paint is applied with a pen, and when a new pen is used, the movable bristles are removed.

The paint should be stirred evenly before use, and diluted with water appropriately to prevent the paint from not opening all over the head. After drying, the putty is repaired, and then the dry one is polished with sandpaper and cleaned.

4. Brush the second coating: the second tempered coating operation requirements are the same as the first time, fully stir before use, if it is not very thick, it is not appropriate to add water or less water to prevent the bottom from being exposed, after the paint film is dried, use fine sandpaper to polish off the small bumps on the wall and the brush bristles, and clean it after grinding.

How to repair the tempered paint wall.

1. Repair of wall stains of tempered coating:

If you find that the special dirt of the tempered paint should be wiped off in time, we can scrub it with a cloth, and blot the wall with a dry towel after washing; Or wipe it with an eraser, etc., or wring it out with a towel dipped in some cleaning solution.

For which walls are very strong, there are stains that are difficult to wipe clean with water. We can choose to use fine sandpaper to gently wipe off the black ones, and then use a wall paint brush to repair them slightly. If the stain is shallow, you can use sandpaper to treat it lightly to reduce the stain.

2. Moldy repair of tempered paint wall:

We can use professional wall mold removers, which are usually available in supermarkets. After shaking the detergent well, use an ordinary air pressure watering can to mix it with water according to the requirements of the manual, spray it on the moldy wall, and after about 30 minutes, the mold will naturally decompose. This groomer is suitable for all kinds of wall colors, but it is relatively high.

3. Toughened paint wall cracking treatment

For wall cracking, we can use a shovel blade to shovel off the paint film about 10 cm on both sides of the crack to expose the substrate and find out the cause of the cracking. If there are cracks in the substrate, you can use caulking plaster to fill the cracks, wait until the plaster hardens, and then scrape the putty and reapply the latex paint. It is advisable to use elastic lacquers, and many brands are now offering stretch films, which are more effective in preventing paint cracking.