What is the reason why the edge of the mobile phone tempered film cannot be attached?

1. In addition to a small part of the quality problems of the tempered film itself, it is mainly because the edge of the mobile phone screen has a curvature, such as a screen, curved screen, etc., the edge of the tempered film can not be attached to the edge of the screen with a radian, it is recommended to paste a soft film, or a special curved tempered film matched with the mobile phone, both of which require high film technology, and it is recommended to ask professionals to paste.

2. It may be accidentally stained with ash when pasting, and the tempered film in the upper right corner may be wet, so you can wait until it is dry before pasting. The quality of the tempered film is inferior, the glue is uneven, and in order to save costs, the coating process may be used, and the glue on the corner is thin. The data is inaccurate when cutting the material, resulting in the tempered film can not be fully attached to the screen.

3. It may be that the screen is not clean, pay attention to cleaning and wiping it clean, it may be a problem with the workmanship of the tempered film, or a problem with the mobile phone itself. Some mobile phones have a bit of an uneven screen, so it is not suitable for tempered film.

For the first time, I pasted a hydrogel film, plastic goods, and pasted the product dry, card segment, and even released a skill to make my teammates scold. The scratch fingerprints made me sick to the point of vomiting. Later, I went to the physical store and pasted a tempered film, and it felt brand new at first.

It didn't take two days to find that the touch screen failed, and I clicked it with my fingers, I felt that the screen and the film were not directly touched, and then the edges of the mobile phone case were warped up, and the obsessive-compulsive disorder was sick, and I was decisively torn off. It's not my habit to run naked.,Later, I saw the sapphire crystal-plated tempered film of the bar friend's full glue.,2 of the twelve hours.,**The first one was pasted**.,The second one sent a tutorial.,Carefully it's pasted.。

There are --- four types of membranes on the market.

-Hydrogel film--- all-plastic electrostatic laminating film, TEP soft plastic film, no explosion-proof scratch-resistant function, but easy to paste, paste is not bad, can be washed in ash, disadvantages: obsessive-compulsive cleanliness addiction can not be accepted, poor feel Touch screen astringent No slippery feeling, plastic scratches, easy to dirty. The wearing of the condom part will be the top membrane, the edge is rough, and I am ordered for half a month to 3 months, and I usually only use a week to stand the bird.

- Network tempered film--- full-screen tempered film glass, curved**, no glue in the middle screen display part, only a circle of black-edged parts with double-sided tape, no explosion-proof function, easy to fit, crooked paste will not have white edge bubbles, convenient for consumers to stick their own film, disadvantages: the middle of the fit is suspended, the touch screen is not sensitive, the display is not clear enough, and there is no explosion-proof glue, it is easy to break the screen from the middle. After I used it a few times, I felt hehe.

-UV film --- tempered film glass, glass no glue, after receiving the goods, the glue is packed in a small bottle, and a UV lamp is also sent, just like the kind of lamp used to bake nails when doing nail art, corroding the screen, and it is difficult to remove the glue on it at that time. If you don't want your phone to peel off, it is recommended not to try it.

- Full glue laminated tempered film--- new name Sapphire crystal-plated tempered film--- full screen coverage, full glue lamination, technical requirements are sufficient, the glass is a hot bending surface, glue is generally only the Japanese devil's Oriental AB glue can reach the standard, the production cost is high, the scrap rate is also high, and the ** is doubled. The touch screen is sensitive, the feel is smooth, and the screen can be combined into one, disadvantages: high fitting accuracy, can not be crooked, after the crooked paste, resulting in one side arching, a large white edge bubble seamless elimination, very test film technology.

Strong hands-on ability Careful and patient people test and try, don't buy the handicap party, buy as much as you want.

Haha, the dot film of the side glue has never been used, fooled, the current iron cloth shirt sapphire crystal-plated tempered film, Huawei after-sales designation, dog Dongshang 89 to 2, but also loose a lens film, with strength very, the traditional full glue adsorption electrostatic lamination, hanging any film, at least an imported no.

Reason: The edge of the mobile phone tempered film cannot be laminated because the mobile phone is a curved screen, and the film is flat, so it cannot be laminated.

Solution: It can be repaired with white edge repair solution.

Introduction to tempered film:

The latest tempered glass protective film launched in the United States, a high-tech protective film specially designed to protect the screen, is currently the most powerful high-end new product to protect the screen. The thickness of this protective layer is only millimeters, which can completely cover the original screen surface, prevent damage from external forces, scratches, and increase the impact absorption, which is 5 times higher than the standard of PET film. It does not affect the effect of the screen.

On this basis, hackers launched a tempered glass oxygen eye film, which prevents the harm of blue light radiation on the human body on the basis of protecting the mobile phone screen, prevents myopia, and realizes the dual protection of man and machine.

2.There are still many places where tempered glass is used in the home, such as doors and windows, coffee tables, shower rooms, etc. Many times when I hear tempered glass, people will think of the word "strong", as we all know, in the past, there was no sharp angle after the tempered glass was broken, and it was also called "safety glass", but because of a number of tempered glass self-explosion incidents, people understand that tempered glass is also an irregular missile around them!

3.Tempered glass oxygen eye film is a new type of screen protection material, with a light transmittance of more than 98%, while restoring the color of the screen, the unique adsorption layer gives effective protection to the screen, and can also block the blue light radiation in the mobile phone, protect the human body from the harm of blue light, and realize the dual protection of man and machine. Because of the frequent occurrence of mobile phone incidents, young children play mobile phones for a long time to cause vision loss, tempered glass oxygen eye film is gradually welcomed by people, hacker tempered glass oxygen eye film has Apple, Samsung, ipad and other models.

There is always a corner of the mobile phone tempered film that is not true because there are foreign objects that have not been cleaned up.

The steps of the method of pasting tempered film on the mobile phone are as follows:

The tools that need to be used are missing: tempered glass film, wiping cloth, vacuum cleaning paper, alcohol wiping cloth.

1. Use an alcohol wiping cloth to wipe off the grease and bacteria on the surface of the phone.

2. Use vacuum paper to suck the alcohol and a small amount of dust cleanly, and there can be no foreign objects.

3. Tear off the release film of the tempered glass film, as shown in the figure below.

4. Hold the tempered film in both hands, align the four sides, and slowly put it down vertically.

5. Gently tap the middle of the argument with your finger, and the tempered glass film will be automatically adsorbed.

6. Finally, use a wiping cloth to check the surface of the tempered glass film that has been pasted and the mobile phone.

<> steps: 1. Stick the corner of the tempered film with transparent glue and slowly pull up the transparent glue;

2. After this corner is turned up, use another piece of transparent glue to stick the dust off the mobile phone screen;

3. Re-paste this corner;

4. After pasting, use a hair dryer to blow it slightly to make the film more conformable;

5. If the method is not feasible, it may be a problem with the tempered film itself.

Precautions: Because the mobile phone is a side-curved screen, it is necessary to use a special film, in order to avoid warping, you must choose a soft film.

1. Wipe the mobile phone clean while blowing on the hair dryer, use the glasses cloth, carefully paste, and use the hair dryer to blow and paste. 2. When the white edge of the elimination liquid is removed from the white edge film, gently squeeze the elimination solution, grasp the edge of the small brush and slide it slowly. White-edged removal will also slowly move into the void along the gap to eliminate white-edged.

3. Use oil to remove the white edge, stick the oil along the edge gap of the mobile phone with white edges, and gently press to squeeze the oil out. 4. Paste soft film or curved ** mobile phone screen edge with curvature, such as screen, curved screen, etc., the edge of the tempered film can not be attached to the edge of the screen with arc, the screen is not wiped clean, and there is dust at the edge, it is recommended to paste the soft film, or a special curved tempered film matched with the mobile phone.

Clever tips for tearing UV glue tempered film:

1. Prepare a clean bowl, pour an appropriate amount of hot water, soak it in a clean cotton cloth, and then take out the cotton cloth and wring it out for later use.

2. Turn off the power of the mobile phone before operation and set aside.

3. First of all, you need to seal the charging port and earphone port of the mobile phone with transparent tape to prevent water from entering during operation.

4. Spread the cotton cloth that is still a little hot with wrung out water on the mobile phone, leave it for a period of time, and repeat 7-8 times.

5. Start to remove the tempered film, first start to remove the tempered film from the upper corner of the mobile phone.

6. Lift up one corner of the tempered film, don't just lift it all from this corner, so that it is easy to pierce the hand, and it is necessary to peel it along the edge to the direction of another corner, and after revealing a large range, as shown in the figure below, you can start to remove the tempered film in a large range.

7. The tempered film was completely removed.

You can check out the following methods of operation and grinding:

1. Confirm whether the land brigade uses a third-party 3D tempered film.

At the same time, confirm whether the adhesive flows into the gap of the button, and when pasting the third-party 3D tempered film, it is recommended to use other pieces of paper to cover the key position before the film to prevent the glue from flowing into the gap;

2. Restart your phone to see if it is restored;

3. Back up your data.

Restore all settings. This operation will not delete the data in the phone, but will restore all the settings in the phone, including: the wallpaper set, the unlock style, wifi, the default opening program, etc., and the third-party software logged in the phone also needs to be logged in again.

If the above methods are invalid after operation, you can bring your mobile phone and purchase voucher to the customer service center for testing and processing, customer service center address: enter vivo official website vivo**app--my-service outlets or vivo official website web version--slide bottom--service support--service network query--select provinces and cities to query the customer service center address. It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.