Stainless steel integral cabinet, what is the production process?

No soldering required! All steel without a single (gram) wood, laser cutting, bending and forming, the production is completed, and the installation method is the same as that of wooden panel kitchen cabinets. <>

First of all, the design, then the welding, the polishing, the details, and then you can succeed, very beautiful.

First of all, the cabinet should be made of wood, and then cut it with stainless steel iron sheet according to the size of the cabinet, and then wrap the iron sheet around the wooden board, which will be filled with some polymer materials to make the material contact more sufficient.

First of all, you must at least measure the size in advance, and be sure to set the style and style of decoration, then choose a variety of materials, and then weld, and when customizing the cabinet, think about the installation location in advance

Stainless steel cabinet countertops are processed in a professional stainless steel factory, and the production process is not so complicated, that is, a layer of stainless steel plate is bent into the shape of a cabinet countertop using a large press, which is hollow, and then the liner is made inside, which becomes the cabinet countertop, of course, the cabinet sink position should be opened with a laser, and then the sink should be precision welded. The rest of the areas that need to be welded are the over-long part of the slotted countertop (e.g. the countertop exceeds the maximum processing length of the machine) and the corner part of the L-shaped cabinet.

The important parameters of the test stainless steel table are the thickness and type of steel used, the poor steel is to rust, and then the welding process, if the good steel is not welded, it will rust or be damaged in the position of the weld.

Cabinets are the largest pieces of kitchen furniture in the kitchen, and in the high humidity environment of the kitchen, the cabinet material must resist moisture and high cooking temperatures.

1. Stainless steel cabinets.

Stainless steel cabinets are more modern and easier to clean, but the stainless steel cabinet body manufacturing process is more complex, the cost is higher and the processing is more difficult, and it has been used less and less on the market.

Second, fireproof board cabinets.

The fireproof board cabinet is the mainstream material of the whole cabinet, the base material is particleboard or MDF, and the surface is decorated with fireproof board. At present, fireproof board is used the most, but the quality is not different, and the poor quality is easy to degum and deform.

3. Blister cabinets.

Most of the blister cabinets use a seamless PVC film molding process, waterproof and moisture-proof, and have a long life in the moderately large space of the kitchen, but at the same time, it can not withstand high temperatures and is easy to deform, so you can consider it a little when purchasing.

Fourth, plexiglass cabinets.

Plexiglass cabinets look stylish and atmospheric, and they are easy to clean, but they are more cumbersome to install.

Fifth, paint cabinets.

The base material of the lacquered cabinet is MDF, and the surface is baked at high temperature. The cabinets made by the baking paint process are very beautiful and gorgeous, but the level of craftsmanship is high, otherwise it is easy to change color, and it should be carefully cared for when used, for fear of bumps and scratches.

(1) Cutting board. According to the size of the stainless steel cabinet, the length and height of the board should be cut by subtracting the thickness of two layers of PVC (approx., 2) perforation. When playing the hinge hole, you should make a blister hot frame, and pay special attention to the left and right directions when hitting the hinge hole.

3) Milling. According to the door type specifications for milling, the tool must be selected correctly before milling, because the speed of the tool reaches 20000r min, therefore, the tool must be firmly fixed before milling, and there can be no loose wire. The milling profile of stainless steel cabinets must be horizontal and vertical, and the arc connection at the turn should be natural and the depth is consistent.

4) Grinding. Stainless steel cabinet grinding is a very important process, and its effect directly affects the appearance quality of stainless steel cabinets. When grinding, first use coarse sand to grind off the traces left by machining, and then use fine sand to ensure that the stainless steel cabinet is smooth and smooth without scratches, especially at the corner transition.

After the fine sand is polished, it is necessary to check whether there are pores and dents on the board surface, if any. It can make Sichuan 50 glue fill and dry, and the sanding can reach a completely flat core.

5) Glue spraying. The amount of glue used must be appropriate, and the spraying must be uniform, and the compressed air used for glue spraying must be filtered through the oil-water separation device to ensure the quality of glue spraying.

6) Lamination (PVC). Stainless steel cabinets must be strictly checked for fine hard rubber particles on the spraying surface before putting people into the blister machine. When the film is covered on the stainless steel cabinet, the blister workbench must be pressed tightly around it to prevent air leakage, and then the blister workbench is pushed into the vacuum chamber for heating and vacuuming.

The operating temperature of the vacuum chamber and the pressure of the vacuum pressure pump must be strictly controlled during operation.

The cabinet body of Baineng cabinet adopts A8 process, which is not as stuffy as the old kitchen. And worry-free, the corners and corners are not easy to get dirty, unlike wooden cabinets that will inevitably change color and age after a long time, and stainless steel cabinets are very durable.

You must first plan the location of the water supply and limb exhaust duct according to the situation of your own kitchen. before you can design the installation. The kitchen is the highlight of the decoration, sloppy, the original selection of Bamberg is the door-to-door installation, I don't know anything about this, but I don't have to worry about the trouble.

Now the average family chooses wooden cabinets and stainless steel cabinets, each with its own advantages, depending on personal preference. My home is equipped with Bamberg's stainless steel cabinets, the reason why I don't choose wooden cabinets is because wooden cabinets are not easy to clean, the kitchen is more humid, easy to breed bacteria, wooden cabinets do not last a few years, and stainless steel cabinets are easy to take care of, and moisture-proof and insect-proof, more worry-free, or discuss it with my wife.

Abstract: stainless steel cabinet is made of stainless steel as the material, after cutting, punching, milling, grinding, grinding, laminating six processing technology made of cabinets, stainless steel cabinets on the market are generally finished, of course, you can also choose to customize, but ** higher, if you want to reduce costs, you can make your own stainless steel frame cabinets, with stainless steel shelves to weld out the entire shape of the cabinet, do a good job of size positioning, sensitive to do cabinets, countertops, door panels. Let's take a look at how to make stainless steel cabinets.

First, how to make stainless steel cabinets.

Stainless steel cabinets with the advantages of sturdy and durable, fashionable appearance, not easy to get dirty, easy to maintain, long service life, etc., have gradually become the new favorite in the cabinet market

1. Cutting board: one-to-one cutting board according to the size of the cabinet according to the need, and the length and height of the board after cutting should be subtracted from two layers of PVC about thick.

2. Punching: Punching hinge holes, to make blister hot racks, pay special attention to the left and right directions when punching hinge holes, and don't get reversed.

3. Milling: milling is carried out according to the specifications of the cabinet door, and the cutter must be selected correctly before milling. The milling profile of the stainless steel monolithic cabinet must be horizontal and vertical, and the arc connection at the turn should be natural and consistent in depth.

4. Grinding: Stainless steel cabinet grinding is a very important process, and its effect directly affects the appearance quality of stainless steel cabinets. When grinding, first use coarse sand to grind off the traces left by machining, and then use fine sand to ensure that the stainless steel cabinet is smooth and smooth without scratches, especially at the corner transition.

5. Glue spraying: the amount of glue must be appropriate, and the spraying must be uniform, and the compressed air used for glue spraying must be filtered through the oil-water separation device to ensure the quality of glue spraying.

6. Lamination: Before the stainless steel cabinet is put into the blister machine, it is necessary to strictly check whether there are fine hard rubber particles on the spraying surface, when the film is covered on the stainless steel cabinet, the blister workbench must be pressed tightly around it to prevent air leakage, and then the blister workbench is pushed into the vacuum chamber for heating and vacuuming.

Second, how to do it yourself with a stainless steel frame holding jujube rack cabinet.

The stainless steel cabinets on the market are generally finished products, which are made, and the customized ones are more expensive, but if you have experience, you can also make a cabinet with stainless steel shelves, the cost is lower, and the effect is not bad. So how do you do stainless steel cabinet frames?

1. Before production, weld out the entire shape of the cabinet with a stainless steel shelf and do a good job of size positioning; The cabinet is made of two-layer floor tile lamination.

2. Considering the stability of the countertop, after erecting a floor tile, some loose steel bars should be laid on it, and then poured with cement, so that the cement layer will not crack and is also firmer. The interior of the cabinet can be replaced with a pull basket, wooden planks or tiles.

3. Install the stainless steel or quartz countertop and stainless steel door panel, and a self-made stainless steel frame cabinet is completed.

1. Design a "linkage door" for the base cabinet or wall cabinet at the corner of the stainless steel cabinet, and the two doors form a 90-degree angle when closed, and will be opened together when opened. In this way, the entire corner part can be displayed when opened, which is very convenient to use.

2. Make a special-shaped cabinet and place it in the corner of the stainless steel cabinet, so that the corner cabinet can become an ordinary cabinet with a small mouth, which is very convenient to use, and the operation space of the countertop at the corner has also become larger.

3. If the corner of the stainless steel cabinet is located on the island, the corner can be designed to be double-sided to use the cabinet, so that all the space can be fully utilized.

Fourth, configure some special hardware baskets at the corners of stainless steel cabinets, such as small monster baskets, corner baskets, buckets, etc., so that it is convenient to use space that is out of reach under normal circumstances.