I bought skates, the front and back length is just right, but there is a gap between the left and ri

Updated on home 2024-06-24
23 answers
  1. Anonymous users2024-02-12

    The top-of-the-line shoes are custom-made according to the shape of the foot.

    However, the general shoes are made by the manufacturer by combining various foot shapes.

    Low-end shoes shoes are just shoes.

    Let's discuss your problem.

    It's just that I found that the shoes are not wrapped well.

    It could be that it is not being worn in the right way.

    If it's casual shoes.

    Usually the movements are simpler, then wear a pair of thick socks.

    If it is a general flat flower shoe.

    That's to nail a patch on the side.

    Or just change the liner (not cheap).

    It is recommended to wear a combination of socks and nails.

    Refer to other answers.

    Thank you very much.

    Roller skating instructor can also communicate with me.

    Value-added services.

  2. Anonymous users2024-02-11

    There's no good way to deal with this, because the shape of this roller skate can't be changed! Let's use the lace pull tight! Don't wear a few pairs of socks

  3. Anonymous users2024-02-10

    Maybe the wrapping of the shoes is not good.

    What kind of shoes are yours? It won't be casual shoes.

  4. Anonymous users2024-02-09

    Is it that the cassette is not tightly fastened. If it's smooth shoes.

    You can ask someone else how to tie the cassette. Pull up the buckle on the outside, insert the card strip, and press down the buckle after inserting it tightly, so that it is very tight.

    If that doesn't work, you can take out the inner lining and attach a sponge and other shoe covers.

  5. Anonymous users2024-02-08

    I don't know if you buy casual shoes or flat shoes, the latter generally doesn't have this problem. Flat flowers have to be dressed tightly. You can wear more than one pair of socks, and if you get bored, you can put them on the outside of the inner tank.

    It is also possible to sew a thick patch on the inner tank. If you have money, you can simply change to a smaller liner, which is not expensive.

  6. Anonymous users2024-02-07

    Tie the laces a little tighter, buckle them tightly, and what shoes are yours?

  7. Anonymous users2024-02-06

    Small in front and back, large in the middle: this is the intersection wheel, also known as the banana wheel. It is more flexible and suitable for doing some flat flower movements;

    Large front and back, small middle: this is rare, in fact, it is similar to a flat wheel, suitable for brushing the street, and the flat flower action is more difficult to do;

    The front and back are as big as the middle: Generally, the initial equipment of roller skates under 800 on the market is like this, which belongs to general casual shoes.

  8. Anonymous users2024-02-05

    If a roller skate is missing a heel, we recommend that you take it to a professional repair shop for repair quickly. It is best not to skate on roller skates until repairs, as they may cause greater damage or danger.

    If you can't get to the repair shop in time, you can temporarily place your roller skates in a safe place. At the same time, you can buy some acrylic glue or other glue suitable for this type of material, and try to reglue the missing heel back on. However, this is only a temporary solution to the town-type source, and you need to seek professional help in time to repair the roller skates.

    Please note that roller skates are a high-intensity piece of sports equipment and rental stools need to be repaired or replaced promptly if there is serious damage. At the same time, check the safety of roller skates every time they are used to ensure that they are in perfect condition.

  9. Anonymous users2024-02-04

    If the heel of your roller skate is missing, it is recommended to stop using it immediately and seek professional repair as soon as possible. The heel of roller skates exists to protect the heel and increase the stability of the shoe, which can have adverse effects on the human body if missing.

    You can choose to go to a professional repair shop or a shoe factory to reinstall a heel to make the shoe more comfortable and stable. If used directly with the heel, it may lead to a series of problems, such as easy sprains and increased fatigue.

    In addition, it is necessary to pay attention to the protection of shoes, regularly maintain and repair the shoes to prolong the service life, and at the same time, you should also wear relevant protective equipment when roller skating, such as elbow pads, knee pads, helmets, etc., to avoid injury.

  10. Anonymous users2024-02-03

    1 The heel needs to be replaced.

    2 The heel is an important part of roller skates, and the lack of a heel can affect the use of roller skates and may even lead to safety hazards.

    Therefore, the heel needs to be replaced in time.

    3 If you don't know how to change your heels, you can go to a professional roller skating shop or sports equipment store for help.

    While replacing the heel, you can also check whether other parts of the roller skate are damaged or worn to ensure the normal use of the roller skate.

  11. Anonymous users2024-02-02

    Timely maintenance and repair, if your roller skating finger is missing when the heel of the shoe is removed, it will not be able to support the heel correctly, which can easily lead to foot injury or hand injury. Adjust the position of the shoe first: Roller skates generally have two devices, one is the lace and the other is the strap, you can try to adjust the position of the strap to increase the stability and support of the shoe, and reduce the risk of foot injury.

  12. Anonymous users2024-02-01

    You can try contacting the manufacturer to see if they have it in stock or to see if there are similar components available for replacement.

  13. Anonymous users2024-01-31

    Summary. Hello, your family may recommend you to buy a larger one. Because they think that they will grow up and wear them for a longer period of time.

    What should I do if I buy big roller skates? It seems that there is still a little distance after putting it on, but they all say that it will fit after buying a smaller one.

    Hello, your family may recommend you to buy a larger one. Because they think that they will grow up and wear them for a longer period of time.

    This is a good idea, but it is recommended to buy normal size shoes.

    Teachers and classmates all said to buy one or half size smaller.

    Especially if you buy roller skates, it will be more comfortable to learn to skate at normal size and skate on a regular basis.

    You can buy a small half-size, and it's better not to buy a smaller one.

    They said it was propped up after that.

    No, the small half size and the standard size are the reasonable configuration of roller skates.

    However, if you feel that the smaller one is also comfortable to play. That's okay too.

    Do you need to buy an insole pad?

    It's up to you to feel comfortable.

    If it is only a little more comfortable to wear, you don't need to pad, so that the pad is more than enough.

    However, if there are more large ones, you can choose to find a merchant to change the small size or pad an insoles.

    If it's bigger, you can remove the insole.

  14. Anonymous users2024-01-30

    Summary. 1. The first step is to install the shelf and the upper shoes, the upper shoes and the shelf of the general speed skating shoes are fixed at two points, and the screws of the two points should not be tightened during installation, so as to adjust the position of the shelf, under normal circumstances, the front of the wheel frame should be fixed in the middle of the big female toe and the second toe, and the rear part of the wheel frame should be fixed in the middle of the heel. It can also be fine-tuned according to personal skating habits.

    1. The first step is to install the shelf and the upper shoes, the upper shoes and the shelf of the general speed skating shoes are fixed at two points, and the screws of the two points are not tightened in order to adjust the position of the shelf, under normal circumstances, the front of the wheel frame should be fixed in the middle of the big female toe and the second toe, and the rear of the wheel frame should be fixed in the middle of the heel. It can also be fine-tuned according to personal skating habits.

    2. The second step is to press the bearing on the wheel, and put a small destroyer wheel sleeve between the two fiber-letter bearings, and the whole part of the bearing should be embedded in the wheel during installation, otherwise it will affect the rotation speed of the wheel.

    Finally, fix all the wheels on the shelf, insert the wrench into the screw drop when screwing through the screws, and do not tighten it too tightly, otherwise it will lead to the phenomenon of eliminating the hole and not screwing or the phenomenon of screw silver silky bridge banquet silk when dismantling, which will affect the normal disassembly and maintenance of the wheel, and the installation can be completed in accordance with the above steps.

  15. Anonymous users2024-01-29

    1 All If you are 2 to 3 cm larger, you will not be able to move correctly because your feet will move involuntarily in the shoes, and you will also sprain due to too much space in the roller skates when wrestling.

    A slightly tighter buckle increases the bearing capacity of the roller skate, and can transfer the strength of the foot to the wheel, making it easier to control the balance; And it can evenly transfer the weight and the force emitted by the foot to the pulley through the sole.

    Regardless of the type of roller skate, it must fit the foot, which means that the toes can touch the top of the roller skate slightly. Many beginners think that roller skates will get bigger and bigger, because the roller skating action is the knee bending forward; When the knee is pressed forward, the heel will move back, the gap between the toe and the front end of the roller skate will increase, and the inner layer of the roller skate will be foam will become soft due to the increase in foot temperature. Therefore, the impact must be there, and the gap between 2 and 3 cm is not small, for your own safety and comfort, it is recommended to change to the right size.

  16. Anonymous users2024-01-28

    To buy roller skate shoes, you have to buy a small No. 1-2 one, ยทยท Because the inner liner of the shoes is very thick...

  17. Anonymous users2024-01-27

    Don't move the one you just bought, you must change to one or two smaller sizes, otherwise the shoes will be one or two sizes larger after a long time of slipping.

  18. Anonymous users2024-01-26

    The holes in the knife holder of your roller skates, the 4 holes are not on the same line, right?

  19. Anonymous users2024-01-25

    How is it different, take a look at the picture above.

  20. Anonymous users2024-01-24

    <> "Yes, this is an off-road double-row roller skate, which can also be used to walk the dog, and the user reviews in the United States are very good.

  21. Anonymous users2024-01-23

    <>Those were roller skates from a long, long time ago, and now they're basically gone, and maybe there's something ancient.

  22. Anonymous users2024-01-22

    Yes, you can look for it on **.

  23. Anonymous users2024-01-21

    Really, it's called figure skating, and it's suitable for all kinds of venues. You can find it in **.

Related questions
5 answers2024-06-24

There are too many choices within 1000, and it is difficult to give specific brands and models. It is recommended to go to ** first to see if there is anything you like. If you want to learn fancy, it is recommended to buy flat flower shoes, with slightly smaller wheel diameters. >>>More

5 answers2024-06-24

It is recommended not to buy casual shoes, unless you buy 500+, otherwise it will hurt your feet a lot and it will be difficult to slip. >>>More

6 answers2024-06-24

Generally, this price gt is better, if you don't understand, you can go to Tao, and then enter the Xixi roller skate tutorial and then ask the shopkeeper inside, if you don't understand the equipment or technology, it's OK to say you know.

25 answers2024-06-24

During normal charging, the red light is on, and now the green light is on, it may be that the internal wiring is faulty, and it is recommended to find a professional to repair it. >>>More

22 answers2024-06-24

It can be taken back, but it requires the full cooperation of your brother. >>>More