What should I do if the dumpling machine I used last time won t turn when I use it again?

The dumpling machine does not turn, do the following checks.

Turn off the power, open the shield and see if there is a blockage in the meat grinder. You can use your hand to see if it is flexible.

Check whether the power cord, socket, switch, and air opening are normal;

Then send power, turn on the switch to see if it is running?

There is no response at all, rule out the power supply problem (check correctly before) and see if there is a protection switch. In some models, the power will be cut off if the protective cover is not properly covered or if there is a foreign object in the machine.

The motor has a sound, but it doesn't rotate. Power! Eliminate the stuck in the machine (the previous check is correct) if it is a 220V machine. There may be a problem with the capacitor, if it is not a capacitor, then the motor problem is suspected and needs to be sent for inspection.

If there is no way to rotate the meat grinder when it is turned on again last time, you need to check whether the parts of the meat grinder are still intact or whether the power connection is correct.

The meat grinder you used last time, this time it won't turn when you use it, it may be that the motor of the meat grinder is faulty, take a look at it.

1. If the household meat grinder does not rotate, it may be that the capacitor is broken, try to change a capacitor first, if it does not rotate, the motor will burn.

2. Power supply problems, such as fuse burning, circuit breaker damage, control line failure to make the contactor not engaged or contactor damage;

3. Problems of the motor itself, such as short circuit between coils, grounding, bearing jamming, rotor breakage, etc.

4. The load is too large, resulting in the motor being overloaded or even unable to start.

The meat grinder you used last time won't turn when you use it, maybe it's because your meat grinder has an electrical failure, maybe you can buy a new one, maybe you can go to the repair shop to see if it can be repaired.

This situation is generally a power supply problem or a bearing problem in it, you can listen to whether there is a sound, if there is a motor sound, it means that it is a bearing problem, if there is no motor statement, it means that it is a power supply problem.

If the meat grinder you used last time doesn't work again this time, it may be due to some parts getting stuck inside. You need to take it apart and replace it with a new blade.

You take it out and clean it, see if it was not assembled when it was assembled, or something was stuck before, there is no problem with the manual one, and if it is electric, check the wiring or battery.

If the meat grinder that used to run out suddenly doesn't spin, you can disassemble it and see if anything is stuck in it? If there are none, then it may be broken.

The meat grinder that can't work is that there is a problem with the machine, if you can contact the after-sales service, you will send it to the maintenance department for maintenance, and you can't open it for repair, and you won't be responsible for the after-sales service after opening!

1.If you are sure that the meat grinder is normal, then confirm whether there is power.

2.The meat grinder does not rotate, check whether the blade is installed in reverse, and the meat grinder has a protection mechanism.

The meat grinder that was used last time will not be turned when it is used again, so check the line first. If the line is smooth, check whether the cutter head is powered off.

You can clean up the machine and you can get back to it.

Then your meat grinder is broken, you should see if you ask your customer service or after-sales service, how do they deal with it? If you only use it once and don't turn it, you can ask.

It's not going to turn around, so you can only use this to fix it, there's no other way.

Uh, didn't the meat grinder clean it thoroughly after you used it last time? Uh, is there something stabbing in the bottom of the shaft? Do you have to clean it up and then see if the power contact is tight?

If the meat grinder you used last time worked well, you don't use it now because you didn't brush it.

Before the power is on, we use the reamer that first coils the meat grinder to see if it can be rotated. Then check if the start button is damaged.

The meat grinder doesn't spin anymore.

It's possible that one side is stuck.

It's possible that the wires are broken, or the circuits are burned, so check it.

Then it is possible that your meat grinder is broken and does not need to be repaired.

Check the micro switch.

Hello, the dumpling machine refuses to produce is usually caused by the following reasons:1Dumpling wrappers that are too dry or too thick:

Dumpling wrappers that are too dry or too thick will cause the dumpling machine to refuse. The solution is to apply an appropriate amount of water to the dumpling wrappers, or roll the dumpling wrappers a little thinner. 2.

Too much or too little dumpling filling: Too much or too little dumpling filling will cause the dumpling machine to refuse to produce the phenomenon. The solution is to control the appropriate amount of dumpling filling when it is put into the dumpling machine.

3.Improper placement of dumpling machine accessories: If the dumpling machine accessories are not properly placed, it will also lead to the phenomenon of refusal.

The solution is to install the accessories correctly. 4.Dumpling machine parts are damaged or malfunctioning:

If none of the above methods work, then it is possible that the parts of the dumpling machine are damaged or malfunctioning. At this time, it is necessary to check whether the parts of the dumpling machine are operating normally, and replace the damaged parts in time. In short, if your dumpling machine refuses to happen, you can troubleshoot according to the above reasons, find the problem and solve it in time.

Fiber transport spikes.

There are two common reasons why the dumpling machine will not work: 1. The machine cannot work normally because of the failure or damage of the internal accessories. For example, the machine cannot raise or turn the baffle to squeeze out the dough, and it is tightly blocked inside the machine.

2. Due to various defects in the processed dough, or because the moisture content of the original material has been reduced, it becomes a viscous liquid, so that it is tightly blocked inside the machine. In this case, the dough does not properly land to the bottom of the machine in order to squeeze out the dumplings.

Summary. Hello, very happy to solve the problem for you<>

This is generally not good, even if the meat is at room temperature, it has to be cut into small pieces to <>

Frozen meat grinder is a kind of meat processing equipment with high versatility and wide range of use in the meat product production industry. It relies on the screw to push the raw meat in the hopper to the pre-cut cutting plate, and through the rotary extrusion of the screw, the orifice plate and the reamer are relatively running, so as to cut the raw meat into the shape of particles, ensuring the uniformity of the meat filling.

Can the dumpling machine ground meat.

Hello, I am your life assistant, I have seen your problem and am inquiring for you, please wait a moment <>

Hello, very happy to solve the problem for you<>

This is generally not good, even if the meat is at room temperature, it has to be cut into small pieces to <>

Frozen meat grinder is a kind of meat processing equipment with high versatility and wide range of use in the meat production industry. It pushes the raw meat in the hopper to the pre-cut cutting plate by the screw according to the middle bank, and makes the orifice plate and the reamer produce a banquet sail through the rotation and extrusion of the screw, so as to cut the raw meat into the shape of particles and ensure the uniformity of the meat filling.

Hope it helps you and I wish you a happy life! If you are satisfied, please give a thumbs up for my service, thank you very much for your support and encouragement, we think we will use the only chain brother more after the call

There are many styles of home meat grinders. Generally, the meat is cut into small pieces and placed in a container with a blade, and then the upper part of the meat grinder with an electric motor is covered on top of the container with a blade, so that the shaft of the blade is aligned with the shaft of the motor, and then the switch at the top is pressed to rotate the blade. In this way, the meat dumplings are minced in a few minutes.

This one is particularly easy to use, more convenient, what brand are you buying, you can first make the meat into small pieces, and then put it into small pieces.