How to flash A356, A368T manual flashing tutorial to find the solution

There are many ways to flash the machine, and the key is to determine the effective method by the problem of the equipment or the purpose of the flashing.

Take card swiping as an example: use memory cards (SD, TF, etc.) to flash the machine, card swiping process:

3. Shut down, remove the SIM card, install the memory card, and it is recommended that the important things in the memory card should be backed up.

4. When shutting down, press the power button and the volume plus button at the same time, about ten seconds, and then let go.

5. Enter the recovery mode, i.e. REC mode.

6. Select Wipe Cache Partition to clear the cache.

7. After clearing the cache, select Wipe Data Factory and restore the factory settings.

8. Select "Install Zip from SDCARD", the power button is OK, then select Apply SDCARD:update, and the power button is OK, that is, select the flash package from the memory card to flash the machine, and wait patiently for it to be completed.

Flashing tutorial.

There are a lot of flashing software, and it's not the same. You can use a card swipe, the main thing is the ** flash package suitable for the model, further optimize with the ROM assistant, prepare for the work, and then operate according to the tutorial.

Flashing Tutorial] introduces two methods.

1) One-click flashing.

Use flashing software to flash your phone with one click, such as flashing assistant, which is very simple, pay attention to backup.

2) Card swiping. Brother Chan can be swiped according to the conventional card swiping process, pay attention to the third-party rec, and double clear before swiping into the bag, battery power, and available memory!

The swiping steps are as follows:

Step 1: Import third-party high-trace recovery (if you want to flash third-party ROM, third-party recovery is indispensable; If you have already flashed the third-party recovery before, you don't need to flash it again).

Step 2: Swipe the third-party ROM package (card swiping).

2.Enter Recovery mode.

In the shutdown state, press and hold the volume up + power on button to turn on, and press and hold the two buttons until you enter recovery;

In the boot state, after selecting "Restart", press and hold the volume button, and Qi Chen can enter recovery mode;

3.Wipe Data Factory Reset (Wipe out all data) (the volume button controls up and down, and the power button is OK, the same below).

4. yes

5.Wipe cache partition

6. yes

7.Install Zip from SDCARD

8.Choose Zip from SDCARD

9.Find the installation package and open it.

10 Finally, choose to restart the phone, congratulations on the successful flashing! (It takes about 2-3 minutes to turn on the device for the first time, please be patient).