How to flash or factory reset the hammer phone T2

The flashing method needs to be based on the actual fault of the phone.

Take card swiping as an example): use memory cards (SD, TF, etc.) to flash the machine, card swiping process:

3. Shut down, remove the SIM card, install the memory card, and it is recommended that the important things in the memory card should be backed up.

4. When shutting down, press the power button and the volume plus button at the same time, about ten seconds, and then let go.

5. Enter the recovery mode, i.e. REC mode.

6. Select Wipe Cache Partition to clear the cache.

7. After clearing the cache, select Wipe Data Factory and restore the factory settings.

8. Select "Install Zip from SDCARD", the power button is OK, then select Apply SDCARD:update, and the power button is OK, that is, select the flash package from the memory card to flash the machine, and wait patiently for it to be completed.

Hammer phone factory reset reference path: enter the phone [Settings] - [Global Advanced Settings] - [Factory Reset] to reset. If you set a lock screen password on your phone, you can restore the factory settings only after entering the correct password.

The steps to factory reset your Hammer phone are as follows:

1. Open the hand removal machine (nut pro) and tap the settings icon on the screen.

2. In the system settings, scroll down to find the global advanced settings.

3. Click to enter the global advanced settings, and select Factory Reset to Eliminate Burying.

4. During the factory reset, the built-in battery of the mobile phone needs to be greater than 30%, or the mobile phone needs to be connected to the power supply, because in the process of restoring the factory settings of the bridge, do not cut off the power supply, otherwise it is easy to cause system damage.

5. Click to restore factory settings, about five or six minutes, the system can be restarted, and at this point, the factory reset of the phone is completed.

Hello, I am glad to serve you and give you the following answers: Hammer T2 boot method: 1. Press and hold the power button until the phone screen lights up, and then you can turn it on.

2. If the phone can't be turned on, it may be due to insufficient battery, you can try to charge it, or unplug the battery, and then plug it back in and turn it back on. 3. If the phone can't be turned on when you hold it, it may be due to a system failure, you can try to enter recovery mode, restore the system, or flash the phone again. 4. If the phone can't be turned on, it may be due to hardware failure, you can try to disassemble the phone for inspection, replace the damaged limb skin parts, or send the phone to a professional repair shop for repair.

Personal experience: Booting is the basic operation of the mobile phone, if the mobile phone cannot be turned on, it may be due to insufficient battery, system failure or hardware failure, you can take different solutions according to the situation, such as charging, recovery mode, flashing or disassembling check, etc., in order to solve the problem as soon as possible.

The method of factory reset of Hammer phone is:

Go to [Settings] - [Global Advanced Settings] - [Factory Reset] on your phone. If the phone has a lock screen password, enter the password as prompted before restoring the factory settings. (Note: It is recommended to back up important data before restoring.) ）

Set the Global Advanced Settings to factory reset.

1. Turn off the phone completely.

2. After the phone is completely turned off, the method to enter: press and hold the volume up button and the power button (hold these two keys at the same time) until you enter the recovery state, in the recovery the volume button means selection, and the power button means confirmation.

3. After entering the recovery mode, double clear, whether your phone is the recovery that comes with the system or the recovery of a third party, whether your recovery is the Chinese version or the English version, as long as there are [wipe data factory reset] [empty data restore factory settings] and [wipe cache partition] (Chinese version: clear cache) these two can be.

4. Select [wipe data factory reset] (in Chinese, erase all data, that is, restore factory settings), then press the boot button to confirm, and then select [yes - delete all data].

5. Select [wipe cache partition] (in Chinese, clear cache), then press the boot button to confirm, and then select [yes - wipe cache] (yes - clear cache).

6. Then re-select [Reboot System Now], press the power button to confirm, and then start the phone.

1. Turn off the phone completely.

2. After the phone is completely turned off, the method to enter: press and hold the volume up button and the power button (hold these two keys at the same time) until you enter the recovery state, in the recovery the volume button means selection, and the power button means confirmation.

3. After entering the recovery mode, double clear, whether your phone is the recovery that comes with the system or the recovery of a third party, whether your recovery is the Chinese version or the English version, as long as there are [wipe data factory reset] [empty data restore factory settings] and [wipe cache partition] (Chinese version: clear cache) these two can be.

4. Select [wipe data factory reset] (in Chinese, erase all data, that is, restore factory settings), then press the boot button to confirm, and then select [yes - delete all data].

5. Select [wipe cache partition] (in Chinese, clear cache), then press the boot button to confirm, and then select [yes - wipe cache] (yes - clear cache).

6. Then re-select [Reboot System Now], press the power button to confirm, and then start the phone.

Set the Global Advanced Settings to factory reset.

Set the Global Advanced Settings to factory reset.

If you are satisfied, thank you. 】

Hammer phone factory reset, the system does not work, the specific operation to solve the problem is as follows:

Open [Settings] - [Advanced Settings].

Click [Factory Reset] - [Reset Phone].

The tips for using the hammer phone are as follows:

Quick Start Feature:When the hammer phone lights up the screen, there are three default shortcut start keys below, which are **, SMS, and camera.

Quick Change Theme:Place four fingers flat on the screen (when the screen is on) and swipe right to change the theme, or left if you want to switch back.

Set the Global Advanced Settings to factory reset.

1. Turn off the phone completely.

2. After the phone is completely turned off, the method to enter: press and hold the volume up button and the power button (hold these two keys at the same time) until you enter the recovery state, in the recovery the volume button means selection, and the power button means confirmation.

3. After entering the recovery mode, double clear, whether your phone is the recovery that comes with the system or the recovery of a third party, whether your recovery is the Chinese version or the English version, as long as there are [wipe data factory reset] [empty data restore factory settings] and [wipe cache partition] (Chinese version: clear cache) these two can be.

4. Select [wipe data factory reset] (in Chinese, erase all data, that is, restore factory settings), then press the boot button to confirm, and then select [yes - delete all data].

5. Select [wipe cache partition] (in Chinese, clear cache), then press the boot button to confirm, and then select [yes - wipe cache] (yes - clear cache).

6. Then re-select [Reboot System Now], press the power button to confirm, and then start the phone.