How to make a pyramid model yourself. What data is available

The pyramid has five sides with the base, the bottom is square, and the edge length is 60 degrees to the bottom edge.

Equation 1 (pyramid) self-weight l0l5 = weight of the earth.

Equation 2 (pyramid) tower height l000000000000000000000000000000000000000000000000000000000000000000000

Equation 3 (pyramid) tower height square = triangular area of the tower surface.

Equation 4 (pyramid) base perimeter tower height = circumference radius.

Equation 5 (pyramid) base circumference x2 = time division of the equator.

Equation 6 (pyramid) base circumference (tower height 2) = pi ( =.

Who can believe that this series of data is just a random coincidence?

There is also the bisector that extends on the bottom surface**, which is the sub-horizon of the earth, which exactly divides the earth's continents and oceans into two equal halves. Also, the base of the pyramid is located right in the center of gravity on the Earth's continents.

Also, the size of the Great Pyramid is very similar in proportion to the size of the Northern Hemisphere of the Earth. Therefore, it has been inferred that the Egyptians had calculated the flattening rate of the earth 4,000 years ago.

Also, the position of the axis of the Earth's poles changes from day to day, but, after a cycle of 25,827 years, it returns to its original position, and the sum of the diagonal lines of the pyramid is exactly this strange number.

The 4 inclined planes of the Great Pyramid of Khufu are facing the east, south, west and north squares, the error does not exceed 3 points of the arc, the bottom edge is originally 230 meters long, due to the limestone falling off the outer layer of the tower, the bottom edge is now shortened to 227 meters, and the inclination angle is 51 degrees 52 minutes. The original height of the tower is 146 59 meters, because the top is peeled off, it is now 136 5 meters high, equivalent to a 40-story skyscraper, the bottom surface of the tower is square, covering an area of 5.29 million square meters.

You can scale it down.

Don't be that complicated, I'll give you a statistic; Scaling in or out will do the trick. (Specifications: Height: 20cm; Hypotenuse: 30cm; Hemline:; Note that the angle of the hypotenuse to the ground is maintained at 52 degrees

1+2+3+..n=n(n+1)/2。

n=9, a total of 9*10 2=45.

The pyramid is a simple geometric shape that is easy to make and experiment with. It can be taken in two proportions: 12 cm long at the bottom, 8 cm long at the edge, 8 cm high or 9 cm at the bottom, with a length of the edge and 6 cm high. The size of the model can range from 8 cm to m high, depending on the test object.

Be sure to align the model in a north-south direction and do not place the model near walls, metal objects and electrical appliances.

The connotation of the pyramid model.

The pyramid model emphasizes how information forms competitive decisions, and the pyramid model is divided into three layers. At the bottom of the tower in the analytical model are various basic databases, which mainly store the basic information and key data of competitors. The mid-level update database regularly updates the basic information of competitors to reflect the new initiatives and trends of competitors in a timely manner.

The upper-level analysis, decision-making and decision-making are the competitive decisions formed by the enterprise on the basis of comprehensive analysis of competitive information.

The five levels of the strategic pyramid are progressive.

If we can't achieve the digital and intelligent transformation of the enterprise's business infrastructure, it will be difficult to achieve the reengineering of business processes, as well as the connection of digital and intelligent external channels, not to mention the improvement of customer experience, and finally sublimation to the construction of enterprise digital DNA and culture, which is a process of progressive rebirth.

Five levels

1. First of all, at the top of the pyramid, it is necessary to adjust and plan the company's digital DNA, that is, culture, which includes leadership, organizational structure design, assessment indicators, staffing, etc., which are different from the inherent system of traditional enterprises.

Digital enterprises pay more attention to the leadership's support and adherence to strategy, trial-and-error mechanism, customer-oriented, decision-making efficiency, market response speed, etc., so they need to prioritize planning and coordination in the relevant mechanism and architecture guarantee.

2. The second is that digital transformation is based on customer experience as the core competitiveness, and the products that traditional enterprises compete for, and the channels have been homogenized, and in the digital era, customer experience will become the core, which also gives many small and medium-sized enterprises the opportunity to overtake in the corner with virtual destruction and early laggards, and the customer experience will cover the digital journey of customers.

Including product quality, contact point contact, purchase consulting, value-added services, differentiated value-added, relationship pricing and other links, and enterprises need to achieve seamless connection and experience first in all links.

3. Once again, pan-channel integration, whether digitalization means the disappearance of offline channels, I personally think not, and offline channels are gradually transformed into experience centers, complementing online channels.

4. Then do a good job in business process reengineering, data will become the core asset of digital enterprises, how to apply data to all aspects of the process, replace the original paper materials and manual intervention, in order to improve process efficiency and customer experience will be the core thinking point of process reengineering.

The process thinking of traditional enterprises is based on control, while the digital process is based on customer experience, and is realized with the help of basic scientific and technological means, such as big data, artificial intelligence, blockchain, etc.

5. Finally, combined with the above design and planning, science and technology will introduce the corresponding system architecture to provide technical support for digital enterprises, and try to achieve distributed, multi-threaded, and massive data processing of the core system at the basic level of science and technology.

In the middle layer, technology should be modularized, parameterized, and real-time as much as possible, and at the application layer, technology should be open and dockable, so as to facilitate the embedding of enterprise products and services in different ecological scenarios online and offline.

The wisdom in the pyramid model corresponds to the spire of the big data processing model. The general trend of enterprise digital transformation is the need for enterprises to face market competition and the need for enterprises to establish a healthy and effective decision-making chain, and the construction of the DIKW system provides a reference and model for enterprises to move towards this healthy and effective decision-making system.

Features of DIKW:

From the general trend point of view, we have entered a product surplus, consumption upgrade of the hail or generation, the market competition between enterprises is extremely cruel, in the past, the source of our enterprise a product launch, the development of market activities, may also be based on experience, according to the wisdom of business owners.

But today, we must use data to speak, to use data to make decisions, and this is like promoting the arrival of digital transformation, and at the same time, enterprises must rely on data to make decisions, and must also build their own dikw system, and turn this system model into knowledge rent, algorithms in the software, so as to better support enterprises to do a good job and market analysis.

1.Use cardboard to cut out two triangles of the same size (hereinafter referred to as: triangle A, triangle B)2Use scissors to make a straight line at the bottom of the A triangle, the straight line is the vertex cut, note that it is a straight line. But don't cut it in half.

3.Then use scissors to cut from the apex of the B triangle to the bottom, again not in half.

4.Insert the AB triangle together, and it becomes the bracket of the pyramid.

5.Measure the width and height of the bracket and cut 4 triangles with cardboard based on the measured data.

6.Glue or double-sided tape to attach 4 triangles around the bracket, and a prototype of a pyramid will come out.

7.Brush a paper towel around the pyramid with latex and let it dry.

8.Finally, color to draw the bricks of the pyramid.

9.If you want to make several small pyramids, you can follow the steps above, and then use a large piece of cardboard to fix the finished pyramids on them, so that the Egyptian pyramid group will come out.

The above content is original content, none, no Google, hope. )

Finally, I wish you a smooth completion of the pyramid model, if you don't understand anything, you can ask me.

Dust Xiaole. January 10, 2012 00:40:44

In the wave of pyramid research all over the world, there is really a mystery unsolved, and a mystery arises again. There are more and more theories, and more and more bizarre, and the number of people attracted to it is also increasing. A few decades ago, a so-called "new discovery" suddenly appeared, and dozens of monographs and hundreds of articles were published in the West, and thousands of people were experimenting, and its momentum was in the ascendant.

This "new discovery" is the "pyramid energy" that is well-known in Europe and the United States. It refers to a pyramid-shaped structure that produces an intangible, special energy inside it, so it is called "pyramid energy". It is said that this energy has many uses and peculiar effects.

The pyramid could have been discovered by the Frenchman Bovis. As early as the second half of the 30s of the 20th century, he visited the Great Pyramid of Khufu in ancient Egypt and found that there was a garbage can in the hall called "royal family" at the height of the tower 1 3. Despite the high temperature of the "royal family", the organic matter piled up in the barrels, such as the carcasses of small animals such as cats and dogs, did not decompose and deteriorate over a long period of time, but was dehydrated and mummified.

So, on a whim, Bauis went back and made a scale-down pyramid-shaped structure, and placed the dead cat on a platform 1 3 high on it, and the dead cat was also not rotten, but mummified. The same test was done with other organic substances, and the same results were obtained. Since then, many people have conducted further experiments to prove that food, razor blades, and many other things can be preserved in this location of the pyramid.

From this, it is estimated that there is an energy within the pyramidal structure, which commemorates microwaves from all directions, multiplying their resonance, thus constituting a "pyramid energy". After further research, he proposed the concept of a planar pyramid and designed a "Ferranagen Experiment** Receptor". This is a cone.

Experiments have shown that this cone also has the same phenomenon and the same effect as that of pyramidal structures. However, these can only be said to be an explanation of the "pyramid energy". As for the mystery of the "pyramid energy", it remains to be further studied.

There is a modern pyramid in Russia, and scientists have discovered that the pyramid has a strange energy.

Of course it's true, I can do it.