Tile oblique typesetting method, tile oblique how to

It can be a herringbone sticker, or a I-sticker.

I think the most earthy, simplest, best to use, and fastest to get started is the photosensitive tile paving and typesetting system. Their slogan is: From now on, there is no one in the world who does not know how to paint tile paving and layout!

It's a bit of a brag, but it's true, it's very simple, it's super powerful, and you have all the features you want.

2.Learning and mastering the software is easy.

3.It's super easy, fast, convenient, and powerful to draw.

4.The layout of this software is mainly used for the actual cutting, processing and paving of ceramic tiles. The layout is flat, and you can also use your own tiles** to simulate the paving effect.

5.The most important thing is that after using this software to draw the tile paving layout, you can directly split the size data with one click, generate a processing order for ceramic tile cutting and processing with various sorting effects, and you can also accurately calculate the total number of tiles used in the corresponding tile paving layout with one click, and the calculation result is super accurate.

However, however, the only regret is that there is a fee, but he is also very conscientious and different, you can charge per time, daily charge, monthly charge, annual charge, ** is also super cheap, completely acceptable.

Photosensitive tile paving and typesetting system is suitable for people: ceramic tile processing factories, ceramic tile shops, decoration companies, and personal decoration users. It's easy for all of them.

You can refer to it.

Tile diagonal paving method.

Dry paving method, which is divided into slurry and scraping paving. A slurry paving method refers to the cement of 1: evenly mixed with sand, the water added is not much, after stirring, it can be kneaded into a ball by hand (can not pinch out the water), and the excess water is sucked out of the structural layer with cement powder evenly sprinkled on the structural layer after cleaning and washing, forming cement slurry, and then the cement slurry is brushed evenly with a wire brush (this process is very important, otherwise the mortar is not sticky to the bottom.

After the completion of the above procedures, shovel in the mixed mortar, according to the established horizontal height roughly paved (slightly higher in the level and angle according to the construction requirements of the floor tiles, with a rubber hammer evenly hammered floor tiles, the mortar under the tamp to make the surface of the floor tiles meet the level requirements. Finally, gently take out the floor tiles, evenly pour pure cement slurry on the mortar surface, put the floor tiles and then gently tamp them to meet the construction requirements.

Advantages of the dry paving method: 1The construction speed is fast, and the labor intensity is not large 2

The mortar has less moisture, and the floor tiles are not easy to turn back on alkali and yellow 3It is not easy to hollow, the density of the mortar is low, and the air can overflow and infiltrate into the mortar during the tamping process 4It is more suitable for paving oversized floor tiles and stone 5

The mortar has moderate strength and is easy to dismantle. It is suitable for places that are often renovated.

Its cons: 1The strength is not high, and it is not suitable for places that carry large activity loads, such as carriageways, parking lots, squares, etc. 2

The density of the mortar is not high, and it is easy to make the daily clean water or rainwater seep into the cushion, and the alkali yellowing will appear 3The adhesion of mortar and floor tiles is generally paid attention to during construction, scraping and paving it is close to the grouting method, the only difference is that there is no need to pour cement slurry, directly scrape cement oil at the bottom of the floor tiles, and then pave the bricks to tamp it. The relative strength is high, and it is not easy to hollow the drum, which is the most widely used paving method at present.

Generally, when using 600*600 antique bricks, it is done obliquely paved and left seams. On the one hand, it is used more when doing European, American, pastoral and other styles. If you're using polished tiles, you don't have to go diagonally.

Generally, it is a 45-degree angle collage, whether the gap between the tiles is uniform, whether the effect of the collage is a straight line of bricks, or to check whether there is a hollow drum?

Generally, if it is obliquely pasted, it will be more beautiful, and the area should be large, and it is generally antique bricks to be more beautiful, of course.

Diagonal paving, also known as diamond paving. The new and fashionable inclined shop can always show people with a changeable attitude. Diagonal paving is widely used, the effect can be simple and luxurious, the color can be simple and elegant can be gorgeous, compared with the straight shop, its decorative effect is more flexible and jumping, varied, can well meet the individual needs.

How can the diagonal paving be pasted? Learn from these 21 cases, and you can choose from a variety of application spaces.

The color block jumps the most smartly.

Use contrasting colors, dark and light colors, so that the diagonal paving is more flexible and beautiful. Diagonal floors are widely used, and it can also be found in small spaces such as corridors and kitchens.

<> can be used with a corrugated line, which can be matched with a darker color of the inclined pavement, which can effectively expand the sense of space and form a compact parquet shape.

<> does not add a wave line, and the effect is also stretched, depending on personal preference.

The starry sky is the most romantic and fresh.

The dot matrix shape is like a sky full of stars, and the romantic atmosphere is overflowing. The tile is cut into accessories by the second time, and then the corners of the four corners of the tile do not need to be too entangled in the tone, because the dot matrix paving is commonly used with the corrugated line, and the color of the corrugated line can be consistent.

<> combined paving is the most gorgeous atmosphere.

There's no denying that just the right amount of intricacy can always bring a sense of luxury, especially when it comes to modular diagonal paving. Through the changes in the gaps between bricks and bricks, the variety of shapes that extend is enough to make people dizzy.

<> bilateral combination is the most common, making the diagonal effect more prominent, but not too conspicuous.

Topical application is the most delicate.

Diagonal paving is not necessarily the full range, and local application is also very common. For example, the background wall, the parquet and even the local application of the sill stone are all unique.

<>, you can even use waterjet cutting to make a "diagonal" parquet effect, which is low-key and restrained.

The application of the sill stone oblique paving has a little more exotic characteristics.

Visual diagonal paving is the most worry-free.

Compared with the straight paving, the brick consumption rate of the inclined paving is higher, and the requirements for the master's paving are also high. If you want to maintain the brick consumption rate and love the effect of diagonal paving, you may wish to try this "fake" diagonal paving method, with diagonal paving as the inspiration for the pattern, direct paving, the most worry-free.

<> large and small bricks are the most chic.

The use of tiles with the same texture, the use of the characteristics of various sizes, staggered diagonal paving, unexpected chic novelty.

<> text ** from Taocheng Daily).

Tile wall typography is a very important step in the decoration process, which determines the aesthetics and overall effect of tile paving. Here's the correct way to typeset your tile wall:

1.Measure the dimensions of the wall and the size of the tiles, calculate the number of tiles needed and the number used for tile cutting.

2.According to the size of the wall and the size of the tiles, determine the position of the initial rows and columns, and make sure that there are no childhood tiles in the corners of the walls and around the doors and windows when the typography is not opened.

3.Thin lines are drawn with a pencil on the surface of the tiles to locate the arrangement of the tiles.

4.Apply latex primer to the back of the tile and mark the tile surface with appropriate horizontal and longitudinal markings to ensure that the tile can be laid according to the planned arrangement and ensure neatness.

5.First of all, at a starting point, start laying with tile adhesive applied on the back of the tile, and each tile is held in the hand and placed according to the planned position. Use ink lines to ensure that the distance between the tiles in each row and column is equal.

6.Allow the tiles to dry for 24 hours and check the flatness of each tile with a level. Then start with the tiles that have already been installed in the rock pants and lay the tiles in the next area using the same method.

7.Once all the tiles have been laid, wipe the fine distribution line with a weak acid solution, and then use ink lines to outline the corner lines and door and window areas, and lay the edge tiles.

8.After all the laying is done, wipe down the tiles once and fix any unsightly areas. Finally, remember to fill in the corners of the walls and the gaps between doors and windows to complete the cleaning work.

Overall, there are many factors to consider when tiling a wall layout, such as wall size, tile size, tile back paint, and correct marking, which will ensure the aesthetics and overall effect of tile paving. By following the steps and precautions above, and adjusting them accordingly, you can easily complete a beautiful tile wall layout.