How to use floor cleaner, how to use floor cleaner? Is there anything to look out for?

No matter how good it is, it's better to read the manual.

The detergent should be poured directly on the ground, then put some water on the ground, and then a simple cleanup with a mop, be sure to choose a clean mop, and in this case be sure to protect yourself from slipping.

When using floor cleaner, no matter what material it is, we need to clean up the impurities and dust on the floor, which can be treated with a vacuum cleaner and then cleaned with detergent, so as not to bring some wear and tear to the floor. At the same time of using floor cleaner, you need to read the relevant instructions of the cleaner carefully, the time of use of each cleaner is also different, some floors can not be used directly, it is necessary to dilute the detergent and water before it can be used, so blindly using the cleaner is likely to bring some harm to the floor.

There are several small steps to use the cleaner for tile floors

1. Open the cap of the detergent bottle, pour it into the basin in an appropriate amount, and wet the tile cleaner with a sponge or ragThis is shown in the figure below

2. Then wipe evenly and vigorously repeatedly (tiles) contaminates the surfaceThis is shown in the figure below

3. Finally, immediately rinse with a large amount of water and mop it with a dry mop to avoid the tile cleaner remaining on the surface of the tile and affecting its appearanceThis is shown in the figure below

It is recommended that when using tile floor cleaning solution, it is bestWear rubber gloves, so it is not easy to hurt your hands, if you accidentally splash your eyes and body, you must wash it with plenty of water?

If you can't move in in time because of the epidemic, you can provide proof and communicate with them, and each apartment provider has a different cancellation policy and extension policy. If you have other personal reasons, it may be difficult to return, and you have to go to the platform or find an apartment dealer to consult and understand.

Tile floor cleaners, used in the following methods, will be more effective.

The steps to use tile cleaner are as follows:

1. Add 2%-8% of the product to water for dilution before use, please wear rubber gloves when operating. Stick this product with a floor mop or towel for rubbing, you can get a satisfactory effect, or you can put the tile into the diluted cleaning agent and soak it for 3-5 minutes.

2. Wet the tile cleaner with a sponge or rag, wipe the contaminated surface and then rinse it with a large amount of water immediately to prevent the tile cleaner from remaining on the surface and turning white.

3. Sprinkle the tile cleaner directly on the wet surface or sprinkle it on a damp cloth and rub it vigorously. If the dirt is heavier, you can increase the amount appropriately, and extend the wiping time, after the dirt is wiped off, and finally rinse with water.

If you have purchased a floor cleaner at home, you need to know how to use it. So how to use floor cleaner correctly? PChouse will take you to find out.

1. Use of ordinary floor cleaners.

Choose a suitable floor cleaner according to the material of the floor, and dilute the appropriate amount of floor cleaner into a bucket according to the degree of dirt before use. Then use a mop to mop the floor from the room to the door. Depending on the concentration of floor cleaner, mix it with water 80-160 times and mop the floor with a mop.

For particularly stubborn stains, it is best to apply a rag with a small amount of floor cleaner, and of course for the corners of the house can be brushed with a toothbrush.

2. How to use wood floor cleaner.

For different floor materials, use different cleaning methods, wooden floors should not be wet, can not be washed with water, can be cleaned with a wrung out mop, if you don't know whether the purchased floor cleaner is suitable for your own wooden floor, then you can also try it in an inconspicuous corner. After the floor has been thoroughly cleaned, waxing is required to protect the wooden floor.

When using, see how dirty the floor is, pour the floor cleaner into a bucket to dilute it, the dirtier it is, the more floor cleaner you use. Once the dilution is complete, mop the floor from the inside out.

Floor cleaner has good cleaning power, sterilization power and brightness, and is suitable for cleaning all kinds of smooth and hard surfaces, especially for cleaning all kinds of floor surfaces. Here's how to use floor cleaners from my collection.

How to use floor cleanerHighly concentrated formula: when used, it can be mixed with 80 160 times of water, and the floor can be mopped with a mop cloth, without water again. For stubborn dirt, you can use a rag dipped in a small amount of this product to wipe it clean.

floor cleaner. Precautions1. Keep out of reach of children;

2. Do not swallow; In case of contact with eyes, please wash with plenty of water and seek medical attention immediately; Localized.

Classification of floor cleaners1. Wood floor cleaner.

2. Tile floor cleaner.

3. Laminate floor space cleaner.

Transport and storage of floor cleanersWhen transporting, it should be lightly loaded and unloaded to prevent collisions.

The product should be stored in a cool, dry and ventilated place.