What to do with the glaze of the roof cylinder bricks, how to remove the roofing cylinder bricks, an

Hello friend. If you shovel Li Zao by yourself, it will not cause much harm to the house, and you can also eradicate it yourself. Remember to be careful and pay attention. If possible, it is better to hire workers.

Cylinder bricks are also known as red floor tiles. Floor tiles fired with clay as the main raw material. Square or polygon. It is generally dark red. Dense and wear-resistant, easy to wash. It is commonly used outdoors and on the ground of public buildings. Floor tiles: A type of floor tiles.

A kind of floor decoration material, also called floor tiles. It is made of clay firing. A variety of specifications.

The quality is firm, the bulk density is small, the pressure is wear-resistant, and it can be moisture-proof. Some are glazed and have a decorative effect. It is mostly used for the ground and floor of public buildings and civil buildings.

The use of floor tiles in a large area will make people feel that the interior is colder, and the environment can be improved by changing the color difference.

The commonly used types in the market are:

Cultural stone is often used to decorate the wall or ground in some individual and natural style rooms, the surface imitates the unevenness of natural rock and the reflection of dots of crystals, and the decoration has a sense of realism in the interior.

Glazed Tile Glazed tile is a tile with a glazed layer burned on the surface of the brick. This kind of brick is divided into two categories: one is fired with clay, which must be glazed because of its high water absorption, and is rarely used now because of its low strength; The other is fired with porcelain clay, and the glaze is also fired in order to pursue the decorative effect, which is slightly higher than the ceramic tiles fired from clay.

Glazed tiles fired from china clay are widely used in home decoration.

Polished brick The whole body brick becomes a polished brick after polishing, and the hardness of this brick is very high, so it is very wear-resistant. Compared with full-body bricks, the surface of polished tiles is much smoother. Polished tiles are hard and wear-resistant, making them suitable for use in most indoor spaces except washrooms and kitchens.

Vitrified tile is a kind of porcelain tile fired at high temperature, which is the hardest of all ceramic tiles, and sometimes when the polished tile is scratched, the vitrified tile remains unharmed.

There are many types of floor tiles, as long as they are laid on the floor of the floor, they are all floor tiles, vitrified bricks, granite, non-skid bricks, etc., while cylinder bricks are single, just a kind, if laid on the ground, it is only a kind of floor tiles. Cylinder bricks are mostly used on outdoor ground.

Colored glazed tiles, colored glazed ceramic wall and floor tiles. Referred to as colored glazed bricks, the surface is applied with beautiful and gorgeous glaze colors and patterns. The state stipulates that the water absorption rate of such products is not more than 10%, because the fine pottery body has small moisture absorption and expansion, and can be well combined with the glaze, so the strength is high, and it can be used for the ground and the wall.

Color glazed ceramic wall and floor tiles refer to the color glazed ceramic tiles suitable for building wall and ground decoration, referred to as color glazed tiles. The water absorption rate of colored glazed ceramic wall and floor tiles should not be more than 10%. The surface of the colored glazed ceramic wall and floor tiles has a flat and three-dimensional relief surface; There are mirrored and non-slip matte surfaces; There are dots and imitation marble, granite patterns.

Colored glazed bricks are widely used for the finishing and ground decoration of exterior walls and columns of various buildings. The thickness of colored glazed bricks is generally 8 12mm.

Cylinder bricks are also known as red floor tiles. Floor tiles fired with clay as the main raw material. Square or polygon. It is generally dark red. Dense and wear-resistant, easy to wash. It is commonly used outdoors and on the ground of public buildings.

Cross-sectional area * stroke, is the volume, look at how many times per unit time, you can know how much airslide is used per unit time, and then calculate the volume of air under 6kg of force. Convert it and you'll be able to come out