How to install and remove computer memory modules, how to remove and install computer memory modules

The method is very simple, when you see the buckle, open it, and then position it correctly, and you can snap it back. The brand should be considered when using memory, and the power consumption frequency should be consistent, otherwise it may not be compatible!

The memory is laid flat on the table to observe the memory, and there is a groove in the middle of the memory interface part, and one side of the groove is significantly longer than the other.

Gently break the clips on both sides of the motherboard's memory slots. (Some motherboards can be broken on only one side.) )

Place the memory into the socket by matching the groove of the memory to the bulge of the motherboard's memory slot. (Don't put it in misalignment, it will burn the motherboard and memory after powering on!)

Press the thumbs of both hands on both sides of the memory module, and press down firmly at the same time, you can hear a snapping sound and the snaps on both sides will automatically pop back to jam the memory module.

It's easy to remove the memory, as long as you gently open the clips on both sides of the memory module, the memory will jump out of the slot.

1。First, we need to find the memory slot on the motherboard. Generally near the CPU, there are 2-4 slots, separated by two different colors.

2。To insert memory, you first have to open the switch ports on either side of the memory slot and press them slightly to the sides.

It should be noted that both sides should be pressed open.

3。Then observe the gaps in the memory modules. This gap splits the gold finger on the memory module (which touches the motherboard slot) into two parts, slightly longer on one side and shorter on the other. This corresponds to the card port on the memory slot. If the direction is reversed, it cannot be inserted.

4。Once positioned, insert in parallel along the slot.

5。It is not allowed to press one side first and then the other side, which is easy to damage the gold finger interface and cause poor contact.

6。After pressing all the time, the switches on both sides will automatically close during the pressing process. If the switch is not turned off, we can also turn it off manually, but we need to make sure that the switch can be turned off. If it can't be turned off, it is not fully inserted and needs to be pressed again.

7。If you have two memory modules, I recommend that you put them in the same color slot so that you can make better use of both channels and make your computer have faster reading speeds. If it's an odd number of memory modules, none of the slots are relevant.

This is how to replace a computer memory module.

The computer's memory module uninstallation is actually very convenient, you only need to take the fixed things on both sides of the memory module tide, and move it directly to do both sides, and directly pull out the memory module.

The method of disassembling and installing the computer memory module is as follows:

1. Pull out the main computer case, observe that there will be simple screws on the back of the case, a total of 2 up and down, and we will unscrew it. After unscrewing the screws, press and hold the case cover and push it to the left, and the main case cover will be removed.

2. Put the main chassis flat on the ground, and you can see that there are two small bars next to the CPU fan, which are memory modules.

3. Peel off the memory module clips on both sides of the closed memory module to both sides, and then pull out the memory module to replace it with a larger one.

4. Install the memory module and carefully observe the lower socket, the left side is shorter, the right side is longer, this position should be inserted corresponding to the memory module, put the memory module into the card slot after the position is compared, first press down one end with your hand, use a little force, the card will automatically jam the memory module.

The role of a computer's memory module

The main function of the memory module is to temporarily store the computing data of the CPU, as well as the data exchanged with external memory such as hard disks, which is equivalent to a bridge in layman's terms.

Random access memory is internal memory that directly exchanges data with the CPU. It can be read and written at any time, and usually serves as a temporary data storage medium for the operating system or other running programs. When RAM is working, information can be written or read from any specified address at any time.

The biggest difference between it and ROM is the volatility of the data, that is, the data stored in the event of a power failure will be lost.

Memory is a device or component used to store a large amount of information in a digital system, and is an important part of computers and digital devices. Memory can be divided into two categories: random access storage, key scrambling and read-only memory. ROM is read-only memory, in addition to fixed storage data, **, solidification program, also has a wide range of uses in combined logic circuits.

The steps to remove the notebook memory module are as follows:

1. Turn off the power and power off, unplug the power supply, mouse and its equipment, and the memory of the general notebook is in the back.

2. Find the location of the memory module.

3. Here I used a screwdriver to remove the cover plate of the memory with open cracks. (Pay attention to the bayonet of the cover).

4. There are elastic cards on both sides of the memory.

5. Use two hands to gently push the two elastic cards in the source line memory outward.

6. Slowly the memory module will pop up, so that you can unplug the memory module.

A: Press the old slot of Xiaoxiang first.

b: Remove the memory vertically to the banquet car.

How to remove the memory module of the <> computer: Remove the back panel of the main unit and lay the main chassis flat, and you can find the memory module at the motherboard location. The memory module is fixed to the motherboard through the card slot and the clips on both sides, and the clips on both sides can be broken outward to cancel the fixation of the memory module.

Next, use two mobile phones to clamp the memory module, and you can take out the memory module.

This answer applies to most computer models from brands like HP Zhan 99 Pro G2 MT & Lenovo Tianyi 510S.

A: Press the slot buckle first.

b: Remove memory vertically upwards.

Hello, the removal and installation method of the computer memory module is as follows: 1. First of all, press the two buckles of the memory module to open it completely. Second, at this time, you need to distinguish the direction of the memory module, and pay attention to the small empty volt gap on the memory module.

Third, there will also be a gap in the memory slot. Fourth, the notch on the memory module and the notch on the socket need to be consistent. 5. After aligning the gap, insert the memory module into the slot, and press hard with both fingers (the force needs to be even).

Sixth, the buckle of the acupressure to both ends of the slot automatically fastens the memory module, so that the internal bucket He carries the memory label is installed.