Software that can divide the LAN network speed equally and does not affect the normal use of either

Why can't P2P software be divided equally, as long as both parties agree to do so! Of course, the software is running on a certain machine, so do you have to install both of them?

There is no such thing at the moment, only one party can impose restrictions on the other.

The best thing to do is for both of you to come to an agreement, and then one person uses a P2P terminator to limit the other to 128k, so that everyone understands psychologically.

It's been made clear.

What the two friends above said is unrealistic, "Jusheng Network Management" is.

P2P software, and when did the "land gamer" come out with another name? --Switch"?? The two of them are 2 things in themselves. How did it become one? Or is it an alias? Cell phone and ** that's a thing.

A mobile phone and a TV cannot be regarded as the same device, you have to distinguish clearly.

The web is very fair, and the current technology can only share one thing for everyone to use.

If you want to restrict who you want, you have to run the control tool on the other party's computer.

The current technology cannot fairly divide the 2m of the 2m of the width to 2 people and no one 1m, so you might as well install a 1m for each person alone.

Still don't get it? This means that your idea is not yet a reality.

There's no need to achieve it, the kind of effect you want to achieve.

If 2 people do not affect each other, the best embodiment is that each person is equipped with a 1m each.

A cup can only be used by one person, and you have to separate it from the middle.

It's better to use the two together.

Go buy one, TP Link router, and then do it according to the settings on the router, we are four people on the ha, and the router has a name"--Switch"?? "

Open the firewall to have a prompt IP intrusion, spoofing, etc., that someone uses P2P or something, such as 360 has an ASP, just open it. No, hi me again.

If you can't get into the router, you can't help it. The router will know by looking at the port traffic.

The reason why P2P terminators can attack your computer is because there are three different types to identify your computer, one is through your IP address, which is okay, it can be solved temporarily with just three commands.

Start Run cmd- ipconfig release (discard the current IP) ipoconfig renew (regain the IP address), and your network will work normally until the P2P terminator no longer scans.

The second is through the name of the computer.

This has to change the name of the computer, troublesome.

The third is through the MAC address.

When you find that there is a problem with the network connection, open the router management page, select the network settings, and then change the MAC address of the router, restart the router, and you will get a new IP address, but you are also afraid that P2P will scan again.

The way to cure the root cause is to pull it yourself, now 1m is very cheap, and it is only one or twenty yuan than the landlord.

The most ruthless way is to take a network cable to connect to the 220V power supply, everyone can't use it, this is what I saw from elsewhere, very bad!

Who manages the router is in charge, so let's discuss it with the administrator

Anti-P2P Terminator ARP Firewall Standalone Try these two.

360 Security Guard.

Enable the ARP firewall.

Discuss it with your neighbor, try to get on good terms, and ask him to give you more.

Is there such a thing?

I haven't heard of it, oh know it, tell me.

Slow network speed is mainly caused by the above reasons, I personally suggest that you first clean up the junk process of the computer, optimize the system, and Trojan horses are also a pest Several reasons for slow network speed:

1. Problems of the network itself (insufficient server bandwidth or excessive load).

2. Network cable problems cause the network speed to slow down (the twisted pair cable is not up to standard, which is manifested as: one situation is that the network speed is very slow when you first use it.)

The other scenario is that the speed is normal at first, but after a while, the speed slows down).

3. There is a loop in the network, which slows down the network speed.

4. The network speed is slowed down due to the broadcast storm caused by the hardware failure of the network equipment.

5. A bottleneck is formed on a port in the network, resulting in slow network speed.

6. The influence of worms causes the network speed to slow down.

7. Excessive use of firewalls.

8. Insufficient system resources.

Slow network speed is mainly caused by the above reasons, I personally recommend that you first clean up the junk process of your computer, optimize the system, and also.

There are Trojans that are also a pest!

2. Check whether the twisted pair is qualified.

3. Use the method of gradual elimination by partition and segmentation to eliminate circuit faults.

Fourth, use the "ping" command to test the computers involved one by one under DOS, and the network card, hub and switch are the most likely to cause accidents.

Devices that cause network speeds to slow down.

5. Change the server NIC to 100M or 1000M, install multiple NICs, divide multiple VLANs, and change the router configuration to increase.

bandwidth, etc. 6. The anti-virus software used must be upgraded in a timely manner; The computer should also be upgraded in a timely manner, and system patches should be installed, and uninstalls unnecessary computers.

services, close unnecessary ports to improve the security and reliability of the system.

If you can solve these problems, your internet speed will be faster!

Please use the patrol ARP tool, search the Internet to know how easy it is.

There is a software called: Internet Law Enforcement Tube.

Haven't heard of this kind of software yet. However, you can use attacks to slow down the opponent's internet speed. Most of this software is based on a local area network, that is, a wide area network, which can be said to be a large local area network. The question LZ asked was a headache for me.

Then use P2P, you can set the bandwidth at will

P2P Terminator, simple and easy to use, effectively limit other people's Internet speed, don't be too bad!

You can go with the network analysis software. To see who has high ARP traffic, it is generally just that. But this can only be seen by the other party's IP and MAC, and it is also possible to see it.

The name of the computer. But some of the software will change their real address. All in all, find out the point of technology.

But you can use an ARP firewall. Now the better one is Caiying ARP, and the other is Jinshan ARP.

This one is more difficult to catch. Do you remember the IP and MAC addresses of everyone on your LAN? Then look at his ARP software traffic, which is higher is generally which.

Those guys who use P2P Terminator Ash software in the LAN are the most hateful and should be caught and beaten. He occupies a high flow of traffic, but lets the big guy drink the northwest wind.

Turn on the ARP Firewall for 360 and then know who's using it.

Jianxu asked Hu to talk nonsense and let your buddy try it with a different network card, if it is still like this, you have to consider whether his machine is infected with a virus. Some viruses can't be killed by a single piece of software. There is also a difference, as long as the software such as PPS has been installed on his machine.

If you want to solve this problem, it is important for your buddies to cooperate and find the real reason for the slow Internet speed. It's not good to limit traffic with things, it affects the relationship, and it can be counterproductive.

Exclusive 10m fiber. Feng Zheng is floating silver, and the stool is empty