How to breed longevity flowers Longevity flower cultivation methods and precautions

1. Soil, potted plants should be prepared in the ratio of 1:2:1 with fertile garden soil, humus soil and river sand, and the preparation effect will be better if a small amount of bone meal can be added.

When the seedlings grow to 10 cm, they need to be properly topped 1 2 times to promote their germination and side budding, so that they can take shape as soon as possible.

2. Light, in addition to the need for shading in midsummer during the growth period, maintain 60% light transmittance, and the normal light in other seasons is good, try not to be too shaded, otherwise it is easy to cause branches to grow and the plant type is loose. During the growth period of longevity flowers, it is necessary to rotate the pot frequently to adjust the position of receiving light, so that it receives light evenly, and promotes the growth of the plant to develop evenly in all directions.

3. Watering, longevity flowers are different from other plants, it has more water content in the body, and it is more resistant to drought. Therefore, do not water too much during the growing period, keep the potting soil dry, and watering each time until the potting soil is dry, generally watering once every 3 4 days; When the weather is dry, it can humidify the surrounding environment. Raise longevity flowers well and avoid potted plants that are too wet and have poor drainage, otherwise it will cause root rot.

4. Fertilization, longevity flower fertilization should be carried out in the spring and autumn growing season and after flowering. Generally, 15 to 20 days can be applied once a thin liquid fertilizer, or on the surface of the potting soil can be applied long-term slow-release fertilizer, can make the plant grow strong and bloom luxuriantly. In order to promote its flowering more, bright flower color and long flowering period, after the formation of flower buds, potassium dihydrogen phosphate solution can be increased 1 2 times to increase the content of potassium elements.

Stop fertilizing in winter.

5. Pruning, if you want to raise longevity flowers, pruning is essential. In the peak season of longevity flowers, it is necessary to pluck the tops in time to promote the branches and make the potted flowers grow more plump. Cut off the residual flowers in time after the flowers are gone, so as not to consume too many nutrients and affect the quality of the next flowering.

6. Precautions, longevity flowers are succulents, do not like too much water, watering is best before noon, to ensure that the leaves are dry before dark. The water quality is slightly acidic, and the salt content should not be too high. Longevity flowers grow well in full sunlight or 60% to 70% astigmatism.

However, it is necessary to pay attention to the light intensity, as insufficient light is easy to make the plant grow, the branches are slender, and the leaves are thin and small. Insufficient light in late autumn will affect the differentiation of flower buds and reduce the number of flowers, which can be appropriately supplemented with artificial light. Longevity flowers like warmth, the growth temperature is 20 to 28, should not exceed 30 during the day, not less than 18 at night, the temperature is too high or too low will terminate its normal growth.

In winter, when the temperature is lower than 8, the leaves turn red and the flowering period is delayed.

1. Longevity round with flower breeding methods and skills guessing the cavity jujube.

2. Longevity flower breeding method and watering.

3. Cultivation methods and precautions of longevity flowers.

4. Cultivation method of flower longevity flower.

1.Longevity flowers love the sun, and daily maintenance should be more sunless in addition to summer, but it is best to control the sunshine within 8 hours a day.

2.Usually, you can weigh the weight of the potting soil by hand, and water it thoroughly when you feel that the bright spike is lighter.

3.Apply thin fertilizer frequently during the vigorous growth period of the plant, water Huaduoduo No. 1 every half month, and use Huaduoduo No. 2 before flowering.

4.In the seedling period of the plant, the top is diligent, and after the plant flower fails, it is necessary to cut off the residual flowers and 2 pairs of leaves under the flower to promote its flowering again.

1. Watering, watering is the easiest thing to be ignored in the breeding method of longevity flowers, and often the simplest thing is the most difficult. Therefore, many flower friends are not clear about how often to water longevity flowers, and the requirements for watering longevity flowers are still very high, generally watering every 3 to 4 days.

2. Soil, although it is said that longevity flowers do not pick soil, but it is easy to rot roots in heavy clay soil, and it is best to grow in loose and fertile slightly acidic sandy loam soil. For home potted plants, it is advisable to mix the same amount of humus soil with the topsoil of the vegetable garden, and then add 5{bf} to 8{bf} of sand as culture soil.

3. Light, longevity flowers are inseparable from the growth of this plant, and suitable sufficient light is also very necessary, in addition to the need for proper shading in midsummer, longevity flowers can fully enjoy the sunshine the rest of the time, and at least 4 hours of direct light can be seen every day in order to grow robustly.

4. Fertilization, many flower friends breed longevity flowers for a long time are sold without fertilization, but don't think that the breeding is a family potted plant does not need to be fertilized, all need fertilizer, long-term non-fertilization will lead to longevity flowers only grow leaves do not bloom, and, longevity flowers have a long flowering period, to break the precept of not fertilizing during the flowering period, apply thin nitrogen, phosphorus and potassium fertilizer or potassium dihydrogen phosphate solution once a month, so that the flowers will not become small and light due to lack of fertilizer.

5. Pruning, how to prune longevity flowers in the cultivation method is also very important, how to prune longevity flowers? In the early stage of vigorous growth of longevity flowers, attention should be paid to topping, promote branching, and make potted flowers grow more plump; After the flowers are gone, the residual flowers should be cut off in time to avoid consuming nutrients and affecting the number of flowers next time. Proper pruning is also very beneficial for longevity flowers.

1. Acidic soil. The maintenance of longevity flowers requires the selection of acidic soil, which can be used in garden soil, humus soil and river sand according to 2:2:

1 ratio to make it a suitable acidic soil with good ventilation and drainage. Clay soil should not be chosen for planting, which will cause root rot in longevity flowers.

2. Watering appropriately. Appropriate watering is the key to how to raise longevity flowers, and it is necessary to pay attention to not too much watering during maintenance to avoid water accumulation in the pot. Usually during the growth period of longevity flowers, watering every 2 to 4 days can be done, and in the winter when the temperature is lower, it is necessary to reduce watering and keep the potting soil slightly dry.

3. Long light. Longevity flowers are very fond of sunlight, and they need to be maintained in a scattered area with plenty of light. Generally, it is necessary to ensure that the longevity flowers can receive more than 8 hours of sunlight, and pay attention to the shade treatment for the strong light in summer to avoid sunburn.

4. Suitable temperature. 20 25 is the right temperature for the growth of longevity flowers, which will keep them in a healthy state of growth. If there is a low temperature of less than 10 and a high temperature of 30, it will cause its growth rate to slow down and become dormant.

Therefore, it is necessary to control the temperature to avoid the poor growth of longevity flowers affected by temperature.

5. Timely fertilization. Timely fertilization provides sufficient nutrients for longevity flowers, so that longevity flowers can thrive. Generally, in the maintenance process, it is necessary to apply a thin fertilizer solution for 15 to 20 days, and after the longevity flower grows flower buds, it is necessary to apply a potassium dihydrogen phosphate solution to make it bloom better.

1. Prune the branches.

Longevity flowers themselves will grow slowly or stop growing in the summer, so we need to prune them properly, you can prune off some residual branches and rotten leaves and long branches, so that it can germinate side buds, and when it blooms, it can bloom more flowers.

2. Illumination. The temperature in summer is relatively high, and the light is relatively strong, so when breeding longevity flowers in summer, you need to properly control the light, you can cultivate it in a place with better light, but at noon, you need to properly shade the light. It can make the longevity flower grow more and more vigorously.

3. Watering. Kalancho itself grows slowly in summer, so it doesn't need much water, just wait until the soil is slightly dry, and then water it thoroughly. If it is watered with tap water, you can leave it in the room to dry for a while, and then water it when the moisture is about the same as the room temperature.

4. Do not get caught in the rain.

In the summer, it often rains, so if you are growing your longevity outside, be sure to move it indoors when it rains. Because the temperature in summer is relatively high, and the temperature of rain is relatively cool, if the longevity flowers are drenched by the rain, it will damage the root system of the plant, which is very unfavorable to the growth of longevity flowers.