-
Anonymous users2024-02-11The solution to the echo of the little genius watch is as follows:
1.The "More" option can be found on the screen, where the "Settings" option is found, and then click on the "Sound" option. In the sound interface, find the "Tap Sound" option and set it to "Mute" mode.
2.You can also find the "More" option on the screen, where you will find the "App Management" option, and click on the "Chat" app. In the chat app details page, find the "Sound Settings" option and click on the "Mute" option to turn off echo.
If the above methods can't solve the problem that the little genius watch has an echo, it is recommended to turn off the watch and restart it. If the problem persists, it is recommended to contact the customer service staff of Little Genius to deal with it.
-
Anonymous users2024-02-10Check the external environment to avoid the stability of Bluetooth affected by object blocking, complex Wi-Fi environments, microwaves, and multi-Bluetooth environments.
Try turning off your phone's Wi-Fi and try again.
Use a soft cloth or a soft-bristled brush to clean the watch microphone and speaker.
dust inside the holes and see if there is any improvement.
Please make sure that your watch has not been flooded recently.
Finally, re-pair your watch and phone and try again.
-
Anonymous users2024-02-09Dance costumes test the style of Oriental Electric.
-
Anonymous users2024-02-08360 Q&A.
The Apple mobile phone is bound to the little genius watch, what's the matter with the echo when you hit **?
Kan Wave zng lv6
Satisfied with the answer. rfv2053971lv10
Hello, it is recommended that you do not get close to the computer when dialing **, and do not get too close to the phone and the watch when dialing, and then you can dial again. If this is still the case, here are two ways to do it:
1. Use the edges and corners of the card picker to press and hold the power button on the back of the watch for about 8 seconds, don't let go, the machine will be black during the operation, and the screen will automatically turn on if you don't let go, and then you will let go of your hand, and then you will operate and use it after the watch reset is completed.
2. Use the cold air of a hair dryer to blow on the horn hole of the watch for about five minutes.
Please press and hold the on/off button of the watch for about 8 seconds, the machine will automatically reset, and then you dial ** again.
-
Anonymous users2024-02-07Don't get close to the computer when dialing Fengnian**, and don't get too close to the phone and the watch when dialing. If this is still the case, you can follow the following two methods:
1. Use the edges and corners of the card picker to press and hold the power button on the back of the watch for about 8 seconds, and don't let go, the machine will have a black screen during operation.
If you don't let go, the screen will automatically turn on and a little genius will automatically appear, and then let go of your hand, and then operate and use it after the watch reset is completed.
2. Use the cold air of a hair dryer to blow on the horn hole of the watch for about five minutes. If the above exclusion is not solved, bring the watch to the local after-sales service center for testing, and the specific situation of the machine is subject to the after-sales test results.
Product features. Little Genius ** watch.
It is a ** watch specially designed for children, and it is compatible with SIM cards.
In this way, it satisfies the direct communication between the mobile phone and the watch, and simplifies the family communication between parents and children. At the same time, it supports micro-chat, supports GPS, GLON-ASS and other nine-fold positioning, one-click silver rescue and rescue, rejection of strange calls, social networking and other functional elements to deepen practicality.
-
Anonymous users2024-02-06Hello, please press and hold the on/off button of the watch for about 8 seconds, the machine will automatically reset, and then you dial ** again. If you have any questions, you can go to the official website of the little genius, and then ask us after the cover is clear.
-
Anonymous users2024-02-05Summary. Hello, first check whether the strap is reversed, or whether the speaker port is blocked, and use the cold air of the hair dryer to clean the speaker. If there is no problem with the inspection, and the sound is particularly low every time you use it, it is recommended to hand over the machine to the manufacturer for after-sales testing.
In addition**The call volume of the watch is not adjustable anymore, you can bring the machine to the point of sale, compared with the machine at the point of sale, if the volume is very different, it is recommended to send the machine for after-sales testing.
Hello, first check whether the eggplant strap is reversed, or whether the speaker port is blocked, and use the cold air of the hair dryer to clean the speaker. If there is no problem with the inspection, and the sound is particularly low every time you use it, it is recommended to hand over the machine to the manufacturer for after-sales testing. In addition**The call volume of the watch is not supported to be adjusted, you can bring the machine to the point of sale, compared with the machine at the point of sale, if the volume is very different, it is recommended that Gao Zai will send the machine to the after-sales inspection year.
-
Anonymous users2024-02-04Little genius. The specific operation steps for adjusting the sound volume of the watch are as follows:
-
Anonymous users2024-02-03Little genius** The sound becomes smaller when the watch is flooded, and the solution is as follows:
Check the strap of the watch to see if it is installed correctly, mainly to see if the bell mouth is blocked.
Wipe the surface of the water dry, and then use the cold air of the hair dryer to blow it, especially to clean the water stains on the speaker.
If the above practice has not yet worked, **The sound of the watch is very small every time you use it, and it is recommended to send it for repair.
-
Anonymous users2024-02-021. Possible causes:
2. The horn is broken.
2. Solution:
1. After connecting**, adjust the volume of the watch, and press the No. 1 button to increase the call volume.
2. When speaking, it is too far away from the microphone hole of the watch, which may also cause the mobile phone to not hear the sound.
3. After hanging up, the fault is still one or two times, and the watch transmitter may be broken, and it can be returned to the factory for maintenance.
-
Anonymous users2024-02-01Hello, there is no sound after the little genius watch is connectedReasons: 1. The watch intercom is broken or the watch volume is turned to 0; 2. There is a monitoring number set in the mobile app, and the watch is dialed by the monitoring number. Solution:
In use of the Little Genius ** watch.
In the process, have you also encountered problems such as invalid class disabling settings, unable to receive text messages, and inaccurate positioning? Because these small problems always let you run the after-sales service, we can't bear it! So we deliberately selected a few questions asked by users, and attached detailed solutions, and then encounter these problems in the future, as long as you follow the following methods, the problem will be solved! >>>More
Hello, it is recommended that you ask the official maintenance department. >>>More
Hello, you can consider it from the following aspects:
1. Insufficient power: If the quartz watch suddenly finds that it is slow, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power. >>>More
Magnetic fields are everywhere, and it is impossible to prevent it, and Hublot watches, which have always been very accurate, suddenly have a time error, and the first thing to guess is whether the watch is magnetized. There are many steel materials in Hublot mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, so the watch is very susceptible to magnetization. Once the Hublot mechanical watch is magnetized, the first situation that will affect it is that the watch is not accurate, there is an error, and in the serious case, the watch stops. >>>More
Adjust the position of the lid, such as which direction the notch is facing, so as not to buckle the wrong position. >>>More