What should I do if Bulgari watches repair my watch is magnetized?

Magnetic fields are everywhere, and it is impossible to prevent it, and Hublot watches, which have always been very accurate, suddenly have a time error, and the first thing to guess is whether the watch is magnetized. There are many steel materials in Hublot mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, so the watch is very susceptible to magnetization. Once the Hublot mechanical watch is magnetized, the first situation that will affect it is that the watch is not accurate, there is an error, and in the serious case, the watch stops.

Moreover, in the development of today's social life, more and more electronic products appear around us. Therefore, the magnetic field is present around us, and there is only a difference in the strength of the magnetic field. Various types of permanent magnets are also widely used in electrical appliances, typically speakers and motors, and both magnets and DC magnetic fields can magnetize "hard magnetic" materials such as steel.

There is also the magnetic buckle on the leather bag, and the watch and credit card are the most afraid of being stained with magnetism. Hublot mechanical watches are generally magnetized to go fast (serious will stop), if the hairspring is stuck together, then the Hublot watch will go faster, about 2 hours or so faster. Steel parts are most susceptible to magnetization, including escape wheels and pallet forks.

The simple way to tell is to use a sensitive point compass and lay it flat. Then the Hublot watch is quickly skimmed over the top of the compass at close range, and this action also requires changing the watch a few more directions, and then repeating. As long as the needle of the compass moves, it means that the watch has been magnetized.

The principle of the demagnetizer is that it can produce an alternating magnetic field, and if the watch is placed in this magnetic field, it will be demagnetized, and if it is a constant magnetic field, it will be magnetized. Demagnetizers can be bought or made by themselves, and generally professional watch stores have demagnetization services. Moreover, in your daily life, you must be careful not to place your watch near or near electrical appliances that generate magnetic fields (such as stereos, refrigerators, computers, etc.), or magnetic objects (such as magnets, mobile phones).

The watch is generally magnetized, (serious will stop) if the hairspring is stuck together, the watch will go faster, about 2 hours or so faster, steel parts are most likely to be magnetized, including the escape wheel and pallet fork, as well as the hairspring, magnetic force will affect and interfere with the balance wheel's ** cycle. Nowadays, in daily life, strong magnetic fields can be seen everywhere, the most typical is the magnetic buckle of the leather bag, which is mostly made of aluminum, iron and boron, which is very magnetic, and there are various electrical appliances, so the watch is easy to be magnetized unconsciously.

1. Watch magnetization: Watch magnetization is one of the common reasons why watches slow down, even if it is an anti-magnetic watch, even an anti-magnetic watch can not be placed next to some electrical appliances, because some of his parts are not anti-magnetic, and they will still be magnetized over time. The watch is magnetized and needs to be demagnetized by a professional watch repair facility.

2. Insufficient power: mechanical watches are divided into two types: manual winding and automatic winding. Lack of power is often an important reason for the watch to slow down or even stop.

Mechanical watches that are wound by hand can solve the problem by winding, while watches that are self-winding are mostly due to insufficient wearing time (less than 8-10 hours a day) or people who exercise a little bit. Friends in the general office or the elderly often have a mechanical watch with insufficient power, causing the watch to slow down.

3. Mechanical failure caused by insufficient maintenance: daily wear is not paid much attention to, and there are problems such as collisions, which makes the internal parts of the watch loose and causes the watch to be inaccurate. Dust, foreign matter, so that the gear teeth are stuck with each other, and some watches are too much or very little oil, which will make the electronic watch go badly.

If you have any questions, please click on the avatar to consult**, welcome to call.

This is because mechanical watches use a beating method to drive the hands and use the characteristics of magnets to rotate them. Therefore, if it is affected by strong external magnetic waves, it will not function normally, and it is also the cause of the watch to become faster, slower or stopped.

The operation of a watch movement is carried out by a myriad of mechanical rotating parts. Under the influence of magnetic force, the mechanical parts are attracted by the magnetic force, and the gears will not turn. After the magnetic force is gone, the machine can move around on its own again.

However, because the mechanical parts in the watch will be magnetically attached to it because they are close to the magnet, the process of rotation will be greatly affected, and it is obvious that the watch is slow.

The solution to the magnetization of mechanical watches: find a piece of iron that is hollow in the middle and is not affected by magnetization, stand firmly on the table, and then the magnetism on the watch can be "sucked" by the iron to restore the watch to normal. You can also spend dozens of dollars to buy a demagnetizer, put the watch on the demagnetizer, and press the switch, as shown in the figure below

2. The effective part of the induction cooker plate is generally round, and the coil is below, if you do not put a large enough steel object, it will generally automatically protect from starting, we had better find a steel water cup (represented by a red circle) filled with water, or other steel containers, in short, do not cover the center of the induction cooker, and it is enough to make the induction cooker start. Then start the induction cooker, it is best to use the maximum power, the watch or tool to be demagnetized, from the far left side of the stove close to the surface of the induction cooker, through the center point of the induction cooker to the right far away, so repeat several times, pay attention to enter from one direction, can play a good degaussing effect.

2. There are many anti-magnetic watches, but the so-called anti-magnetic watches are not all parts of the watch are anti-magnetic, but only the main parts, such as balances, hairsprings, springs and other parts made of anti-magnetic materials. Although it is an anti-magnetic watch, it can only serve a preventive role, so you should avoid placing the watch next to electrical appliances or magnetic objects that generate magnetic fields. If you have a problem, go to [11th Floor, Block D, Central World Trade Building, No. 6, Jianguomenwai Street, Chaoyang District, Beijing

3. Both magnets and DC magnetic fields can magnetize "hard magnetic" materials such as steel. There are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, and when the hairspring is magnetized, the watch will stop immediately. Magnetized watches may not see any problems in the short term, but as time goes by, it will become slower and slower.

4. The watch should avoid being close to the magnetic field, such as placing it next to the electrical appliances (such as stereos, refrigerators, computers, etc.) or magnetic objects (such as magnets, mobile phones) that generate magnetic fields.

What should I do if my watch is magnetized? A small method can be demagnetized at home, saving money and trouble.

- The watch should avoid being close to the magnetic field, such as placing it next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, magnetic objects (such as magnets, mobile phones), and women use handbags to open and close magnetic buckles, and men's mobile phone covers magnetic buckles may make the watch magnetic, causing the watch to run inaccurately or temporarily stop.

What should I do if the watch is affected by magnetism?

The watch is in excessive contact with objects with magnetic fields, which leads to the phenomenon of magnetism on the watch, causing the watch to run inaccurately. After being magnetized, the watch may stop, slow, or fast. If the symptoms are mild, the daily error is tens of seconds.

In severe cases, the daily error is several points. After the watch is magnetized, its magnetism will not recede by itself, and it needs to be demagnetized by a professional watch repair center to return to normal.

The demagnetization of the watch is very simple, find an unmagnetized iron ring, put the watch in the ring, and slowly move back and forth, because the watch has been magnetic, and the iron ring has not been magnetized, so the magnetism on the watch will be slowly taken away by the iron ring.

Remember to adopt it.

Hello, glad to answer for you.

There are many parts inside the watch that are made of steel, such as hairsprings, large and small steel wheels, screws, bearings, and escape wheels, which are easily magnetized by magnets, magnetic fields, etc.

The speed of a watch is controlled by a hairspring, one of the most magnetized parts, and a balance wheel.

If the watch is magnetized, it is recommended that you bring the watch to a regular after-sales center for demagnetization treatment, so as not to affect your normal use.

How to tell if your watch is magnetically copyed:

The watch that was originally worn by the end suddenly became larger, and the first thing to guess was whether it was magnetic. The way to judge whether the watch is magnetized is to use a more sensitive compass, put the compass flat on the table, and then quickly repeat the watch at close range over the top of the compass, such an action also needs to change the watch in a few more directions, and then repeat the hundred, as long as the needle of the compass moves, it means that the watch has been magnetized.

The watch is magnetized:

1.The post-magnetization process of the watch is very simple, the degree does not need to open the cover, directly use the demagnetizer to demagnetize, and the watch can return to normal in 2 seconds. (Please pay attention to the method when using the degausser, if you demagnetize too much, the watch will sometimes go faster or slower, and it is best to leave it to a professional).

2.Find an unmagnetized iron ring, place the watch in the ring, wear it slowly, and after a few minutes, the watch will be demagnetized and restored.

When wearing a watch, if it comes into contact with objects such as generators and motors with strong magnetic fields, or when you accidentally place the watch near radios and televisions, the watch will be magnetized by the magnetic fields of generators, motors, radios, and televisions. After the watch is magnetized, not only is the time inaccurate, but some even stop. So, how do you demagnetize your watch?

It is best to send the watch repair department to degauss, because there is a special equipment for demagnetization, if it is inconvenient to maintain away from the watch shop, you can find a piece of iron that is in the shape of a circle in the middle, there is no magnetization, put it on the table, and slowly wear the watch from the iron circle, and the magnetism on the watch will be absorbed by the iron; You can also place the watch on a clean iron plate that is not magnetized, so that the magnetism of the watch will gradually disappear after two days.

If you have any questions, please call**, please feel free to answer.

1.With a finished watch demagnetizer, about a few tens of yuan a piece (the inside is a coil, with an iron core in the middle, connected to 50Hz alternating current, generating alternating magnetic field demagnetization), can also be self-made;

2.Put the watch on a non-magnetic iron plate for a few days, the magnetism will be conducted to the iron plate, of course, the larger the volume of the iron plate, the greater the magnetic capacity, and the better the effect;

3.Slowly pass the watch through a non-magnetic ring, and the magnetism will flow to the ring;

4.The most common and safest way, if it is too troublesome or feel that you can't get the magnet clean, then you can go to the watch shop or warranty point to find a watch repairer to repair.

In general, you can ignore it, because if you rub the iron rod with a magnet, the iron rod will also be magnetic, but that is only temporary, and there will be no more after a long time, so you don't have to worry too much, and the mechanical mark has a greater impact than the electronic watch You can use a simple method to demagnetize, it's very easy, don't worry But now everyone should not have a sewing machine at home Absorb a magnet on the flywheel of the sewing machine, quickly step on the sewing machine, and then take the watch close to the magnet in the process, basically it's okay Or you find an unmagnetized iron ring, put the watch in the ring, slowly thread it around, and after a few minutes, the watch will demagnetize and recover.

The magnetization of the watch will seriously affect the normal running time of the watch, although you can demagnetize according to the method on the Internet, but it is easy to demagnetize uncleanly. If you need to degauss, it is recommended that you go to a professional maintenance outlet, which can be perfectly solved in a minute or two.

What should I do if my watch is magnetized? A small method can be demagnetized at home, saving money and trouble.

Watches often appear next to these electrical appliances (mobile phones, televisions, computers), and after being magnetized, their magnetism will not recede by itself, affecting the timing of the watch at least, or stopping directly. Although you can degauss yourself at home according to the online method, it is easy to have unclean degaussing, which affects the operation of the movement. The need for degaussing is actually very simple, it is recommended that you go to a professional maintenance network to use the demagnetization machine, which can be perfectly solved in a minute or two.

2. The effective part of the induction cooker plate is generally round, and the coil is below, if you do not put a large enough steel object, it will generally automatically protect from starting, we had better find a steel water cup (represented by a red circle) filled with water, or other steel containers, in short, do not cover the center of the induction cooker, and it is enough to make the induction cooker start. Then start the induction cooker, it is best to use the maximum power, the watch or tool to be demagnetized, from the far left side of the stove close to the surface of the induction cooker, through the center point of the induction cooker to the right far away, so repeat several times, pay attention to enter from one direction, can play a good degaussing effect.

Although anti-magnetic watches have certain anti-magnetic functions, when wearing, for example, when touching objects such as generators and motors with strong magnetic fields, or accidentally placing the watch near radios and televisions, the watch will be magnetized by the magnetic fields of generators, motors, radios, and televisions. After the watch is magnetized, not only is it true that the time is not accurate, but some even go very fast. So, how do you demagnetize a watch?

It is best to send the watch repair department to degaussing, because there is special equipment for demagnetization. If it is not convenient to repair it far from the watch shop, you can find an iron block with a circle in the middle, do not be magnetized, stand it upright on the table, and slowly pass the watch through the iron block circle.