HP laser printers are best not to print more than how many sheets of paper at a time

When the machine is hot, you can stop and rest.

Here's why HP printers only print one sheet in a few minutes:

1. The printing speed parameter of the printer is the speed of the test movement, and it is printed in draft mode under the condition of 5% coverage.

2. According to the same software, the printing speed will be different, the higher the accuracy of the liner, the slower the printing speed, and the processing time will be relatively long.

3. The resolution of printing is different, the speed is also different, the higher the resolution, the slower the printing speed.

4. If you are using ** ink cartridges, then the printing speed will also decrease.

The specific operation of the printer:

1. Connect the printer to the host, turn on the power of the printer, enter the printer and fax folder through the control panel of the host, right-click in the blank space, select the Add Printer command, and open the Add Printer to file guide window. Select the local printer connected to this computer, and select the Automatically detect and install plug-and-play printers check box.

2. At this time, the host will detect the new printer, and soon it will find the printer that has been connected, according to the prompts, put the driver disc attached with the printer into the CD-ROM drive, and after installing the printer's driver, the printer's icon will appear in the printer and fax folder.

3. Right-click on the icon of the newly installed printer, select the share command, open the printer's properties dialog box, switch to the share tab, select Share this printer, and fill in the name to be shared in the sharing name input box, such as compaqij, and click the OK button to complete the sharing setting. <>

There are many reasons for this, and they need to be investigated step by step.

First of all, to eliminate the lack of toner, take out the toner cartridge and shake it up and down several times to make the toner in the drum evenly distributed, and then put it in the machine to print to see if it improves.

Secondly, to eliminate the problem of toner cartridge imaging, it is best to replace a toner cartridge to print for comparison, if there is no toner cartridge, disassemble and clean it and then install it on the test machine.

Finally, observe whether the fixing mold is damaged and whether the temperature is appropriate.

In fact, when the paper enters the toner cartridge when printing, it will come out when the toner cartridge is about to come out, shut down or open the top cover, and jam the paper, and carefully take out the paper to judge.

Check if the paper is wet, and try to change to dry paper, because the air is humid in summer.

1 There is a problem with the compact.

2. There is a problem with fixing.