Is the shell carbon fiber electric floor heating installed in the home or just an installation compa

Shell heating has a wide range of applications. It can be installed in home floor heating installation, schools, hospitals, offices and other fields.

How much is Shure environmental floor heating installation, mainly depends on the equipment you choose, floor heating installation mainly consists of boilers, pipes, water separators, thermostats, auxiliary materials, labor, etc., among which boilers, water separators, pipes and labor are a relatively high part, labor not to say, each place is different, labor costs are not the same, the choice of boiler mainly depends on what brand you choose, how much power, etc., different ** is not the same, the pipeline is also mainly based on the brand, the water separator depends on the brand you choose and the material, etc., Therefore, it is not easy to say how much it is, it is recommended that you find a few more local markets to ask, so that you can do it, Shure floor heating free door-to-door measurement, plan, design.

More and more households are choosing to install underfloor heating for the winter. This is not only an improvement in the quality of life, but also a manifestation of care for the family. In the reporter's survey of owners, more than 7 percent of the owners felt:

Improving the quality of life is a kind of care for the family. The installation of underfloor heating has become an urgent need for families in the south.

As a high-tech floor heating product, carbon fiber floor heating uses high-tech space conforming materials with a high efficiency heat conversion rate of more than 98% carbon fiber, as well as the characteristics of rapid heating and far-infrared health care therapy, which has become a new bright spot in the floor heating industry. However, as a concealed engineering system, it is not easy to rectify once laid, so the quality of the floor heating system has become the core element.

The following is a comparison of mainstream underfloor heating products:

Carbon fiber electric underfloor heating and traditional plumbing:

1.Initial installation cost: large apartment, the initial installation cost of the two is comparable. However, when the house is small, the best advantage of carbon fiber electric floor heating is obvious, that is because the area is small, and the cost of the wall-hung boiler for plumbing is high.

2.Cost of use: wall-hung boiler plumbing - 6-10m3 of natural gas per square month. Due to the slow heating of the plumbing, it must be turned on every day.

Carbon fiber electric underfloor heating – 120-140 watts per square meter. The electricity time for working is 5-8 hours a day, and the cost of carbon fiber electric floor heating is more economical under the implementation of the stepped electrical price policy for houses of the same area.

Maintenance cost: wall-hung boiler plumbing - annual maintenance of water separator (to be replaced in 5-8 years), valve leakage-proof, 2-3 years to clean the water coil, 8-10 years to replace the wall-hung boiler.

Carbon fiber electric underfloor heating – 50 years maintenance-free.

As the world's most cutting-edge technology in the field of carbon fiber, Japan has a leading advantage in the development and production of carbon fiber technology, and the United States cannot compete with Japan in many aspects. Relying on the strong technical support of Shell Local Heating Japan Technology Center, Shell Local Heating focuses on the R&D and production of carbon fiber floor heating. In line with the concept of "paying attention to cutting-edge technology and arming products with science and technology", Shell Local Heating closely follows the world's most cutting-edge carbon fiber technology and draws on the new technology used in the field of global carbon fiber floor heating.

The shell local warm European standard line and national standard line are made of T700 filament carbon fiber from Toray Company of Japan.

Underfloor heating is a familiar heating method, especially suitable for the north, which can help resist the cold. There are many types of floor heating on the market, in addition to the graphene floor heating that everyone prefers, and recently there is carbon fiber floor heating, which is owned by the shell, and most friends are very unfamiliar with this type of floor heating, and they don't know whether it is good or not. So how about shell carbon fiber floor heating?

Here is a detailed answer to this question.

Compared with some similar products on the market, the quality of shell carbon fiber floor heating is good. Some friends who have installed it have commented that the heating speed is fast, and the room will not feel dry, which is more comfortable. Shell carbon fiber underfloor heating has these advantages:

1. Its carbon fiber cable is made of T700 filament carbon fiber of Toray Company of Japan, which is also the highest grade product in the civil field.

2. The three-layer outer sheath production process is adopted, which has the advantages of hunger and filial piety with high temperature resistance, waterproof insulation, acid and alkali corrosion resistance, etc., and can comprehensively protect the floor heating.

3. The solid wire diameter of the whole line is larger, and this high standard of wire diameter thickness can make the carbon fiber floor heating system more robust, safe and durable.

4. The service life of shell carbon fiber floor heating is as high as 50 years, which does not require maintenance, so it does not incur any maintenance costs, and the product is guaranteed for ten years, so you can use it with confidence.

In general, shell carbon fiber floor heating is a very good floor heating, and it is a highly recommended brand.