Build a network family, form a family network

Aren't there a lot of online marriages? It's really hehe.

Re: This is a typical adsl access, please see (0) for wiring

One. The hub is now outdated, because the data passing through the hub is broadcast, and there is no learning function, so it will cause a heavy network load, and changing routers is a wise choice.

Two. After buying a router, I'll talk about how to set up Internet access.

The general wireless router configuration is as follows (take a computer as an example, if it is a wired router, please ignore the steps of wireless settings):

0) If it is ADSL access, prepare two network cables, one network cable to connect the computer network port to the LAN port of the router, and the other to connect the LAN port of the cat to the WAN port of the router (the computer network cable is connected to the router in order to configure the router, if you use wireless, after configuration, you can unplug it).

If the network cable is directly connected, prepare a network cable, connect this network cable to the LAN port of the computer network port, and connect the network cable at home to the WAN port of the router.

1) The router is powered on, and the cat is powered on.

2) Find the router's manual.

3) Find the management IP of the router (generally, login account password (such as admin admin), login ** example -->

4) Statically set the IP address of the computer host and the management IP in the same network segment (if the router is enabled by DHCP function by default, then set the computer network card to automatically obtain the IP).

5) Log in to the wireless router management interface.

6) Turn on the DCHP service of the wireless router.

7) The wireless router is set up with PPPoe auto-dialing function to connect permanently.

8) Turn on the wireless function of the wireless router and set the wireless Internet password (if it is a wireless router, the password setting is complicated).

This should be able to automatically dial up the Internet, wired and wireless can be used at the same time, it is recommended to use wireless, convenient.

PS: If the router is enabled DHCP by default, then the IP and DNS of the computer should be set to automatically obtain, so that if multiple computers form a LAN, there is no need to set the IP.

Three. Rubbing the Internet, you don't have to worry at all, as long as the wireless password setting is complicated, it will be difficult to crack. Now the Internet access in the community is also very cheap, and most people will not come to rub the net, and the network speed is very slow.

Four. For the problem of router speed limiting, TPLin841N has a rate limiting function. It can be set up as one computer with 2M bandwidth to fight Warcraft, and the other with 1M bandwidth to browse the web.

But I don't think there's a need to limit speed if it's your own computer. If you share it with someone else's house, you can limit it. And if you browse the web, you can do it.

Good luck, hehe.

The first question,There is indeed the possibility of fighting with the hub,,The second question,The answer is no,The routing function you bought is not so powerful,,The third question,As soon as your wife's computer is turned on,You are slow,It is very likely that her wife has been infected with a virus,If you want to play games,You'd better deal with the problem of her computer first,Wireless has the possibility of being stolen,You can encrypt,And then set it up in the router to filter the MAC address,Only allow your own two computers to use the router, ,, it should be safe.

Well, it's better to buy a route, and there is a route that doesn't need to be connected multiple times, which is convenient. As for the route, it seems that there is no such function, and there is such a thing as network speed, which can only be limited and cannot be divided in this way. As for the fear of theft.,Set a password.,And then enter the TPLink management interface.,There's a MAC number that shows the connection to this route.,If you and your wife are on the computer.,It's supposed to be two MACs.,More restrictions on it.,Then change the password.,That's it.。

Hope it helps! There is also a telecom that likes to eat broadband, so ask how much broadband telecom gives.

I saw someone tell you how to set up your router, but there is a reminder that some routers don't have this kind of feature. And this kind of feature is not necessary for routers at all. You can buy a router and use it directly.

There should be no problem. Using the hub creates a conflict that makes you feel that the network speed is slow.