Why does Lenovo Z5 keep showing please connect the charger?

Hello landlord, if Lenovo has been showing in me, please connect the charger, it may be that your phone is out of battery or the phone is out of power, it is recommended to connect the charger to try.

Because it shows that it is connected to the charger, and there is no power inside, so you need to connect the charger.

Lenovo Z5 keeps showing please connect the charger, that's because the charger is not connected yet.

Lenovo these five displays, please connect the charger, this is because of this. computer, it's running out of battery.

This should be your charger socket, it may be that there is a problem or the connection is not being charged, or there is a problem with the charging cable.

Lenovo Z5 keeps showing please connect the charger, indicating that there is a problem with the line inside.

Hello, there may be no electricity. Or the charge doesn't work. Go to the after-sales service to test it.

The why does it keep showing please connect to the charger may be it, if there is such a prompt or there is a problem, you have to fill it in.

Alas, why does it keep showing Please connect the charger? This is that I'm out of power, let you charge.

It is recommended to restart the machine, and it will generally be solved.

It keeps showing that you need to connect this charger, it should be a lack of power, or the template you are using normally is faulty, in fact, you can turn it off and restart it again.

I feel that if this happens, it must be when one of your chargers is faulty, so remember to relink it.

Why does Lenovo Z5 keep showing please connect to the charger,This may be caused by no power。

If the car says, it may be that one of your chargers has not been successfully connected, so it is recommended to unplug it and reconnect it.

1. Poor contact of battery contacts. 2. The part of the laptop that supplies power to the battery is damaged. 3. Once the voltage of the battery is too low, the notebook will not start.

4. The internal control chip of the battery limb trillion fails, causing the computer to "think that the battery is in a full state" and therefore does not charge Fault solution: 1. After opening the laptop, there is a power mark in the lower right corner of the computer, click on, and "In the correction of power information, please do not dial the power adapter", it means that the battery is not charged; 2. Disconnect the power supply and press the power button 3 to 5 times intermittently, which means that the battery is fully discharged; 3. Restart the computer first and try it, if it doesn't work, shut it down, and then turn the laptop over and dismantle it; 4. Take out the battery, put the battery aside, wait for 10 minutes, and then put the battery on; 5. If the battery has not been used for a long time, please charge it for more than 8 hours in the shutdown state; 6. If the battery fails, replace the battery.

Hello Lenovo Z5 uses a type-c interface for charging,It's all hand-typed, I hope it can be adopted。

Search for "power" in the search box under the start menu, and you'll see that a lot of power options are immediately displayed. You can see that all the green icons are the settings that come with the system, let's not click on that, but click on the application installed after the driver, the driver of each computer is different, you can click on your own driver, the operation is basically the same.

The details are different because of the operation, so you can directly find "battery maintenance", and you can charge it by resetting it.

Dear Lenovo users, hello!

If your problem is not solved, you can complain, put forward your valuable opinions, and then transfer to manual service.

1.Is there any hint, if the reality is 100% or more than 95%, it means that the battery is full and will definitely not be charged.

2.If the battery can't be charged at 0%, you can reinstall the battery, and if you still can't charge it, it is likely that the battery is broken. It needs to be replaced.

3.If you can't turn on the machine when plugged in, check whether it is powered on, and unplug the battery to see if it can be turned on.

It is strongly recommended that you use the standard charger and data cable for charging, if you use a non-standard charger and data cable, due to the difference in production process and interface parameters, it may not be able to charge normally.

If you use the standard charger and cable and still can't charge, check:

1.Whether the connection between the data cable and the charger and mobile phone is loose, if there is looseness, unplug it and plug it back in.

2.Whether there is dust or debris at the charging socket, if so, it needs to be cleaned.

3.Whether the charger is properly plugged into an electrical outlet.

4.Whether the data cable is damaged.

5.When the temperature of the mobile phone is too high, in order to protect the mobile phone battery, the charging will be temporarily stopped. Restart your phone or let it sit for a while and wait for the temperature to return to normal before trying to charge it.

6.If you still have problems after trying the above methods, please go to the inspection site to check whether there is a problem with the hardware.