What should I do if my Xiaomi phone only has one earphone ringing?

This can be resolved as follows:

1.Check to see if the headphones you are using match your phone's headphones.

Interface standards. 2.If it can be used on other devices, you can check whether there is sound on the phone, and you can restart it.

3.Enter the hardware detection mode of your phone (enter * * in the dialing interface) detection, if the hardware detection fails to detect the headset hardware, it is recommended that you back up your phone data recovery.

Try it after factory settings.

4.If none of the above methods are effective, after-sales testing is recommended.

5.If there is no sound when you use Bluetooth headphones, you can go to Settings - Bluetooth - tap your connected headphones until the earphones appear with the word "In use**", and click the triangle symbol next to the headphones to enter the headphone connection interface, turn on "Absolute Volume" and try.

First check the headphones, try another headset or change a mobile phone to try this headset, generally the phone will not have problems, the headset is damaged.

Xiaomi mobile phone only has one earphone ringing, which means that the power of the other earphone has been used up, you first put it in the charging compartment, charge it for a while, if there is sound, it means that it is good, if there is no sound, you have to repair it.

If it is normal, the earphones are incompatible or the headphones are broken, and if it still rings, there is a problem with the socket or circuit in the mobile phone.

Under normal circumstances, if only one earphone rings in this kind of Bluetooth headset, you can put this headset back into this headphone compartment, restart this headset, and it will generally recover.

Xiaomi mobile phone only has one earphone ringing, the other earphone is broken, if this earphone ** is not expensive, you can choose to buy another one, after all, it is also very useful.

That's probably another one that's broken, you can plug it in somewhere else and try it, if it's still the same then you'll have to buy another one.

First of all, see if the contact points are in good contact and normal, that is, they are broken.

What should I do if my Xiaomi phone only has one earphone ringing? There is only one earphone ringing on the Xiaomi mobile phone, maybe the earphone is disconnected, the line is broken, and the contact is not online.

It may be that the headphones are broken, it is recommended to find customer service for after-sales.

Xiaomi earphones only have one earphone ringing, what should I do? Then there is a problem with that earphone, so it won't ring, so you'd better go to the after-sales service to see what is wrong.

If one of the earphones is broken, go and see if it can be repaired, and if it can't be repaired, replace it with a new one.

If it doesn't affect the use, you will take it, or you can see if it is within the warranty period, and let the store repair it for you for free or what.

It could be a problem with the headphones, don't worry too much. It's good to change the headphones, the headphones are not easy to repair.

In this case, it is possible that the headphones are malfunctioning, and it is recommended that you replace them with a new one to give it a try.

It may be broken, and there is no choice but to buy a new one, these things are easy to break.

Xiaomi, the mobile phone has only one earphone, what do you want to do, you can go to the original Xiaomi's service after-sales service to ask.

The reasons are: not set up properly, not starting, and problems with the headset itself.

1、Not set up,Xiaomi Bluetooth headset is a single ear with sound by default,At this time, you can set up binaural sound according to the Xiaomi earphone manual,It can be solved in less than ten minutes。

2. If there is a problem after using it for a period of time, the best way is to reset the Bluetooth headset, turn off and press and hold for 20 seconds, wait until the second red and white lights flash alternately, then put it back in the box, and then pick it up at the same time, you can automatically connect it in series.

3. If the above methods can't be solved, it is a problem with the earphones themselves, you can contact the after-sales service, or take it for maintenance.

To distinguish the authenticity of Xiaomi earphones, the method is as follows:

1. Distinguish from the outer packaging, the icons and text on the headphone packaging are golden, while fakes are generally green, and the back of the package is printed with rich product information and barcodes, while fakes do not; (However, there are now fakes in new packaging, so for the sake of caution, the following ones must be on the lookout).

2. Look at the wire dust filter cover of the earbuds, the real dust filter metal cover is very fine, and it will diffuse light, and the fake one is much rougher;

3. Look at the earbud head, it is really printed with the words "L" and "R", but the fake one is not;

4. Looking at the earbud head, in the middle of the words "L" and "R", there is a stitched seam, which is really very fine, and you can feel it by looking carefully or scraping it with your fingernails, and the fake gap is obvious;

5. Still look at the earbud head, it is really shiny, and the fake is dull;

Answer: Hello, very happy to answer for you, 1. Take the earphones out of the case and press and hold them to turn them off, press and hold the multi-function buttons of the two earphones for about 15 seconds, and release them after the second red and white lights flash three times alternately, and the earphone reset is completed at this time.

2. Press and hold the button for about 1 second to turn on the dual earphones. (The boot interval needs to be less than 20 seconds), the indicator light flashes double at the same time, about 2 3 seconds after the series success, the left earphone indicator light goes off after the series is successful, and the right earphone indicator light flashes slowly with white light, at this time you can use the mobile phone to search and pair.

Is there anything else I can do to help you?

Please move your fingers to give a thumbs up, thank you Warmly remind you to pay attention to personal protection during the epidemic, and wish you a happy life!

Asked a question tried.

Turning on the Monaural mode will cause only one side of the earbuds to have sound, and you can solve the problem by resuming the binaural mode here:

1. First of all, put the left and right earphones into the charging compartment at the same time.

2. Then when the indicator light on the earphones is on, press and hold the function buttons of the left and right earphones at the same time for 10 seconds.

3. Then wait for the red light of the left and right earphones to flash twice, and then take out the earphones.

4. You can see the earphone indicator flashing, and the binaural mode of the earphone will be restored.

The reason for this problem is that mono audio is set, and you can just tune it back as follows:

2. Secondly, after completing the above steps, swipe down on the settings interface as shown in the figure below, and then enter the next step.

3. Then, after completing the above steps, select the "Smart Assist" option as shown in the image below, and then proceed to the next step.

4. Then, after completing the above steps, click on the "Accessibility" option as shown in the image below and proceed to the next step.

5. Finally, after completing the above steps, swipe down on the accessibility interface to find the mono audio, and turn off the switch at the back, as shown in the figure below. In this way, the problem is solved.

If your Xiaomi earbuds find that there is only one place with some sound during use, this is very likely. It's his connectivity problem, or the headphone jack isn't plugged in, so you can choose to rotate it and learn about the specific test situation.

If there is only a sound on one side, it should be a broken one, but there can only be a sound all the time, and it is possible that one is set and the other is not set.

Turning on the Monaural mode will cause only one side of the earbuds to have sound, and you can solve the problem by resuming the binaural mode here:

1. Put the left and right earphones into the charging compartment at the same time.

2. When the indicator light on the earphones is on, press and hold the function keys of the left and right earphones at the same time for 10 seconds.

3. After the red light flashes twice on the left and right earphones, take out the earphones.

4. You can see the earphone indicator flashing, and the binaural mode of the earphone will be restored.

Eliminate the cause of debris and exclude the cause of the line. Start by cleaning the headphones and see if there is any debris in them. If there is a problem with the headphone jack connector, first dip cotton in a small amount of alcohol, wipe the plug, and then wipe it with a paper towel.

If the noise changes with the twisting of the cable, it should be a problem with the cable, and if there is a problem with the cable, you can try to change the cable. Secondly, when someone around you is energizing or has a strong electromagnetic field, it will also cause the Bluetooth headset to have an electric current sound.

See if the headphone cable is broken or loose, rule out the appearance of hardware damage, and finally if all kinds of inspections of the Bluetooth headset are found to be okay but there is still a current sound, you can contact the seller, after-sales return, inspection and maintenance.

Computers have static electricity, which is also the main reason. Touch the iron part of the computer case with your hands, and if the current sound disappears, connect a piece of copper wire to the screw on the back of the computer at one end and ground at the other end. Whether the microphone is in a reinforced state.

I remove the microphone reinforcement. Because some sound cards don't support it.

1.Confirm whether the volume of the mobile phone is adjusted too low, if it is normal, please enter the "Bluetooth settings" of the mobile phone, check whether the "mobile audio" and "**audio" of the Bluetooth headset in the connected device have been turned on, if it is turned on, please disconnect and reconnect;

2.Delete the connection record of the headset phone, restart the phone, reset the headset and then connect the attempt, if there is no sound, then connect to other mobile phones for testing, if it still can't be solved, it is recommended to after-sales testing.

3.Check whether the ambient signal is poor and replace it with another environmental test;

4.Try to change another phone;

5.If none of the above methods work, it is recommended that you conduct after-sales testing.