Why is there only one earphone on the Apple phone that can be heard

The contact may not be good, pull out the earphone plug and plug it back in or turn it to try to see if there is any sound, if there is no sound, it means that the other side of the ear wire is damaged, you can send it for repair or change the wire by yourself, the method is as follows:

1.First of all, prepare the materials, a headphone cable, and the equipment for soldering things.

2.Next, take the headphones apart.

3.Take out the back cover of the headphones, now only the speaker and the back cover are left, and then separate the cable from the speaker.

4.Now that we are focusing on the horn, we can see that there are two solder joints on the horn (that is, the two solder joints when the thread is removed).

5.Now unsolder the broken wire from the solder joint and take the wire out.

6.Well, the next step is the final step, burn it with a lighter, remove the paint on the line to be replaced, and then weld it up, and finally cover the back cover according to the disassembly step, and that's it.

The phone is not set up, you can set it up, and so is mine.

It may be that there is a problem with the external audio equipment, go to the mobile phone repair shop to take a look.

1. First of all, turn on the phone screen, come to the home screen of the phone, and click the [Settings] function of the phone system.

2. Then in the [Settings] interface, slide down the cabbage bend and look for the [General] buried return.

<>4. At the bottom of [Accessibility], find the [Hearing] column.

<>6. When there is a problem with the earphone, in addition to the failure of the earphone itself, it is likely that the function can be drawn to the far left or right.

Operation tool: iphone11, 1, first on the home screen of the iPhone, tap the settings icon.

2. On the settings interface, click the ballast assist function.

3. In Accessibility Settings, tap Audio Visual.

4. Finally, in the audio visual setting interface, set the volume balance of the left and right channels to the middle of the escort tour. In this way, there is sound on both sides of the Apple earphones.

One ear is a common fault of "wired headphones", and the maintenance ideas are as follows:

1. First determine that it is a headphone problem. That is, to get rid of the influencing factors of the sound source. You can change the earphone to other devices, and you can confirm it by auditioning;

2. In the user's use, the most active is the headphone cable. Because it is the root of the plug and the root of the earpiece, its torsional torque is the largest and the most seriously damaged. That is, for the key inspection object, if conditional, directly change the headphone cable with a plug;

3. If you don't have any conditions, it's more troublesome. Two pins can be used to connect a wire and insert the suspected part of the test (short-circuit and disconnection site) respectively. However, if there is a shield in the original earphone cable, or if there is a single enameled wire, this test method is not effective;

4. If the cause is the earpiece problem of the earpiece, it is mostly due to the broken voice coil wire, or the solder joint is welded. Open welding situation can be repaired. If the voice coil is broken, the inner core can be removed from the old earphone and replaced. But be careful, otherwise it will still be broken due to mistakes.

There is sound on only one side of the iPhone earphone and the earphones are not broken, which is caused by the mobile phone turning on the mono mode.

1. After unlocking your iPhone, find the [Settings] icon in the app on the desktop of your phone to open it.

2. After entering the [Settings] details option list of the mobile phone system, find the [General] setting and turn it on.

3. In the menu bar of [General] settings, swipe down the screen and find [Accessibility] to open.

4. In the [Channel Settings] under the Accessibility page, you can check that the current channel is set to [Mono], so only one side of the iPhone earbuds has sound.

5. Drag the [Balance Button] of the channel setting to the middle and adjust the channel setting to left and right dual channels, which can solve the problem that there is sound on only one side of the iPhone earphone.

This is because the phone has entered headphone mode.

Taking iPhone 6S as an example, the method to remove headphone mode is as follows:

1. First click "Settings" on the desktop of your iPhone 6S.

2. After entering the settings, select the "General" option.

3. Then find the "Accessibility" item and click to enter.

Fourth, after entering, select the "Audio Call Mode" option.

5. After entering, select "Auto" or "Speaker" to disable the headphone mode of your phone.

First of all, confirm whether the earbuds are damaged, if not, it may be a problem with the settings, you can try it by following the steps below:

1. Enter the settings interface.

2. Enter the general interface car stove.

3. Enter the accessibility interface.

4. On the Accessibility page, slide the list.

5. Find the volume balance button and find that the sound is completely inclined to the left channel.

6. Adjust the channel channel to balance the left and right of the sail disadvantages, and the sound can be heard on both sides of the earphone.

Hello dear! To put it simply, there are nothing more than 3 possibilities: 1: The sound of the headphones is too loud, and it is difficult not to let people hear it2:

Poor sealing of the earphones Leave such a big gap between the earphones and the ears Of course the sound leaks 3: moving iron The vibration of the dynamic earbuds will also cause sound leakage.